PCI: dwc: Improve code readability and simplify mask/unmask operations

Improve code readability and simplifies mask/unmask operations by
inverting the applied logic (no functional change is intended).

Replace variable name from irq_status to irq_mask, since its goal is to
keep track of which interrupts are masked or not.
Signed-off-by: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Jingoo Han <jingoohan1@gmail.com>

drivers/pci/controller/dwc/pcie-designware-host.c

@@ -164,9 +164,9 @@ static void dw_pci_bottom_mask(struct irq_data *d)
 		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
 		bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_status[ctrl] &= ~(1 << bit);
+		pp->irq_mask[ctrl] |= (1 << bit);
 		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    ~pp->irq_status[ctrl]);
+				    pp->irq_mask[ctrl]);
 	}
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
@@ -187,9 +187,9 @@ static void dw_pci_bottom_unmask(struct irq_data *d)
 		res = ctrl * MSI_REG_CTRL_BLOCK_SIZE;
 		bit = d->hwirq % MAX_MSI_IRQS_PER_CTRL;
 
-		pp->irq_status[ctrl] |= 1 << bit;
+		pp->irq_mask[ctrl] &= ~(1 << bit);
 		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK + res, 4,
-				    ~pp->irq_status[ctrl]);
+				    pp->irq_mask[ctrl]);
 	}
 
 	raw_spin_unlock_irqrestore(&pp->lock, flags);
@@ -665,13 +665,13 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 
 	/* Initialize IRQ Status array */
 	for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
+		pp->irq_mask[ctrl] = ~0;
 		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_MASK +
 					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
-				    4, ~0);
+				    4, pp->irq_mask[ctrl]);
 		dw_pcie_wr_own_conf(pp, PCIE_MSI_INTR0_ENABLE +
 					(ctrl * MSI_REG_CTRL_BLOCK_SIZE),
 				    4, ~0);
-		pp->irq_status[ctrl] = 0;
 	}
 
 	/* Setup RC BARs */

drivers/pci/controller/dwc/pcie-designware.h

@@ -177,7 +177,7 @@ struct pcie_port {
 	struct irq_domain	*msi_domain;
 	dma_addr_t		msi_data;
 	u32			num_vectors;
-	u32			irq_status[MAX_MSI_CTRLS];
+	u32			irq_mask[MAX_MSI_CTRLS];
 	raw_spinlock_t		lock;
 	DECLARE_BITMAP(msi_irq_in_use, MAX_MSI_IRQS);
 };