Merge tag 'imx-soc-5.7' of...

Merge tag 'imx-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/soc

i.MX SoC changes for 5.7:

 - A number of cleanups from Anson Huang to remove unneeded includes,
   drop unnecessary newlines and base check etc.
 - Apply Cortex-A9 specific errata only to Cortex-A9 based i.MX SoCs
   and avoid impacting Cortex-A7 based designs.

* tag 'imx-soc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx: Drop unnecessary src_base check
  ARM: imx: Remove unnecessary blank lines
  ARM: imx: Add missing of_node_put()
  ARM: imx: Remove unused include of linux/of.h on mach-imx6sl.c
  ARM: imx: Remove unused includes on mach-imx6q.c
  ARM: imx: Remove unused include of linux/irqchip/arm-gic.h
  ARM: imx: limit errata selection to Cortex-A9 based designs

Link: https://lore.kernel.org/r/20200318051918.32579-2-shawnguo@kernel.orgSigned-off-by: Arnd Bergmann <arnd@arndb.de>

arch/arm/mach-imx/Kconfig

@@ -471,8 +471,6 @@ config	SOC_IMX53
 config SOC_IMX6
 	bool
 	select ARM_CPU_SUSPEND if (PM || CPU_IDLE)
-	select ARM_ERRATA_754322
-	select ARM_ERRATA_775420
 	select ARM_GIC
 	select HAVE_IMX_ANATOP
 	select HAVE_IMX_GPC
@@ -484,6 +482,8 @@ config SOC_IMX6
 config SOC_IMX6Q
 	bool "i.MX6 Quad/DualLite support"
 	select ARM_ERRATA_764369 if SMP
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD
 	select PINCTRL_IMX6Q
@@ -494,6 +494,8 @@ config SOC_IMX6Q
 
 config SOC_IMX6SL
 	bool "i.MX6 SoloLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SL
 	select SOC_IMX6
 
@@ -502,6 +504,8 @@ config SOC_IMX6SL
 
 config SOC_IMX6SLL
 	bool "i.MX6 SoloLiteLite support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SLL
 	select SOC_IMX6
 
@@ -510,6 +514,8 @@ config SOC_IMX6SLL
 
 config SOC_IMX6SX
 	bool "i.MX6 SoloX support"
+	select ARM_ERRATA_754322
+	select ARM_ERRATA_775420
 	select PINCTRL_IMX6SX
 	select SOC_IMX6
 

arch/arm/mach-imx/anatop.c

@@ -89,12 +89,11 @@ void imx_anatop_post_resume(void)
 
 	if (cpu_is_imx6sl())
 		imx_anatop_disconnect_high_snvs(false);
-
 }
 
 void __init imx_init_revision_from_anatop(void)
 {
-	struct device_node *np;
+	struct device_node *np, *src_np;
 	void __iomem *anatop_base;
 	unsigned int revision;
 	u32 digprog;
@@ -135,9 +134,10 @@ void __init imx_init_revision_from_anatop(void)
 			void __iomem *src_base;
 			u32 sbmr2;
 
-			np = of_find_compatible_node(NULL, NULL,
+			src_np = of_find_compatible_node(NULL, NULL,
 						     "fsl,imx6ul-src");
 			src_base = of_iomap(np, 0);
+			of_node_put(src_np);
 			WARN_ON(!src_base);
 			sbmr2 = readl_relaxed(src_base + SRC_SBMR2);
 			iounmap(src_base);
@@ -149,6 +149,7 @@ void __init imx_init_revision_from_anatop(void)
 			}
 		}
 	}
+	of_node_put(np);
 
 	mxc_set_cpu_type(digprog >> 16 & 0xff);
 	imx_set_soc_revision(revision);

arch/arm/mach-imx/gpc.c

@@ -10,7 +10,7 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
-#include <linux/irqchip/arm-gic.h>
+
 #include "common.h"
 #include "hardware.h"
 
@@ -111,7 +111,6 @@ void imx_gpc_mask_all(void)
 		gpc_saved_imrs[i] = readl_relaxed(reg_imr1 + i * 4);
 		writel_relaxed(~0, reg_imr1 + i * 4);
 	}
-
 }
 
 void imx_gpc_restore_all(void)
@@ -282,4 +281,5 @@ void __init imx_gpc_check_dt(void)
 		/* map GPC, so that at least CPUidle and WARs keep working */
 		gpc_base = of_iomap(np, 0);
 	}
+	of_node_put(np);
 }

arch/arm/mach-imx/mach-imx6q.c

@@ -5,29 +5,16 @@
  */
 
 #include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/cpu.h>
-#include <linux/delay.h>
-#include <linux/export.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/irq.h>
 #include <linux/irqchip.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/pm_opp.h>
 #include <linux/pci.h>
 #include <linux/phy.h>
-#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/micrel_phy.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
-#include <asm/system_misc.h>
 
 #include "common.h"
 #include "cpuidle.h"

arch/arm/mach-imx/mach-imx6sl.c

@@ -4,7 +4,6 @@
  */
 
 #include <linux/irqchip.h>
-#include <linux/of.h>
 #include <linux/of_platform.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>

arch/arm/mach-imx/mach-imx6ul.c

@@ -25,7 +25,6 @@ static void __init imx6ul_enet_clk_init(void)
 				   IMX6UL_GPR1_ENET_CLK_OUTPUT);
 	else
 		pr_err("failed to find fsl,imx6ul-iomux-gpr regmap\n");
-
 }
 
 static int ksz8081_phy_fixup(struct phy_device *dev)

arch/arm/mach-imx/platsmp.c

@@ -109,6 +109,7 @@ static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
 	dcfg_base = of_iomap(np, 0);
+	of_node_put(np);
 	BUG_ON(!dcfg_base);
 
 	paddr = __pa_symbol(secondary_startup);

arch/arm/mach-imx/pm-imx6.c

@@ -655,6 +655,8 @@ void __init imx6_pm_ccm_init(const char *ccm_compat)
 
 	if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
 		imx6_pm_stby_poweroff_probe();
+
+	of_node_put(np);
 }
 
 void __init imx6q_pm_init(void)

arch/arm/mach-imx/pm-imx7ulp.c

@@ -62,6 +62,7 @@ void __init imx7ulp_pm_init(void)
 
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx7ulp-smc1");
 	smc1_base = of_iomap(np, 0);
+	of_node_put(np);
 	WARN_ON(!smc1_base);
 
 	imx7ulp_set_lpm(ULP_PM_RUN);

arch/arm/mach-imx/src.c

@@ -43,9 +43,6 @@ static int imx_src_reset_module(struct reset_controller_dev *rcdev,
 	int bit;
 	u32 val;
 
-	if (!src_base)
-		return -ENODEV;
-
 	if (sw_reset_idx >= ARRAY_SIZE(sw_reset_bits))
 		return -EINVAL;