Commit a4fb2122 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source
  ACPI: quiet ACPI Exceptions due to no _PTC or _TSS
  ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter
  ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86
  ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS
  ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N
  ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers
  ACPI: autoload modules - Create ACPI alias interface
  ACPI: autoload modules - ACPICA modifications
  ACPI: asus-laptop: Fix failure exits
  ACPI: fix oops due to typo in new throttling code
  ACPI: ignore _PSx method for hotplugable PCI devices
  ACPI: Use ACPI methods to select PCI device suspend state
  ACPI, PNP: hook ACPI D-state to PNP suspend/resume
  ACPI: Add acpi_pm_device_sleep_state helper routine
  ACPI: Implement the set_target() callback from pm_ops
parents bc72450a 323ef30a
......@@ -2,7 +2,7 @@ obj-$(CONFIG_ACPI) += boot.o
ifneq ($(CONFIG_PCI),)
obj-$(CONFIG_X86_IO_APIC) += earlyquirk.o
endif
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
obj-$(CONFIG_ACPI) += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += cstate.o processor.o
......
......@@ -422,7 +422,7 @@ void __init setup_bootmem_allocator(void)
*/
reserve_bootmem(PAGE_SIZE, PAGE_SIZE);
#endif
#ifdef CONFIG_ACPI_SLEEP
#ifdef CONFIG_ACPI
/*
* Reserve low memory region for sleep support.
*/
......
......@@ -432,7 +432,7 @@ static void __init pagetable_init (void)
paravirt_pagetable_setup_done(pgd_base);
}
#if defined(CONFIG_SOFTWARE_SUSPEND) || defined(CONFIG_ACPI_SLEEP)
#if defined(CONFIG_SOFTWARE_SUSPEND) || defined(CONFIG_ACPI)
/*
* Swap suspend & friends need this for resume because things like the intel-agp
* driver might have split up a kernel 4MB mapping.
......
......@@ -67,6 +67,8 @@ EXPORT_SYMBOL(pm_power_off);
unsigned int acpi_cpei_override;
unsigned int acpi_cpei_phys_cpuid;
unsigned long acpi_wakeup_address = 0;
const char __init *
acpi_get_sysname(void)
{
......@@ -986,4 +988,21 @@ int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
EXPORT_SYMBOL(acpi_unregister_ioapic);
/*
* acpi_save_state_mem() - save kernel state
*
* TBD when when IA64 starts to support suspend...
*/
int acpi_save_state_mem(void) { return 0; }
/*
* acpi_restore_state()
*/
void acpi_restore_state_mem(void) {}
/*
* do_suspend_lowlevel()
*/
void do_suspend_lowlevel(void) {}
#endif /* CONFIG_ACPI */
obj-y := boot.o
boot-y := ../../../i386/kernel/acpi/boot.o
obj-$(CONFIG_ACPI_SLEEP) += sleep.o wakeup.o
obj-y += sleep.o wakeup.o
ifneq ($(CONFIG_ACPI_PROCESSOR),)
obj-y += processor.o
......
......@@ -51,8 +51,6 @@
Low-Level Sleep Support
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI_SLEEP
/* address in low memory of the wakeup routine. */
unsigned long acpi_wakeup_address = 0;
unsigned long acpi_realmode_flags;
......@@ -117,8 +115,6 @@ static int __init acpi_sleep_setup(char *str)
__setup("acpi_sleep=", acpi_sleep_setup);
#endif /*CONFIG_ACPI_SLEEP */
void acpi_pci_link_exit(void)
{
}
......@@ -120,7 +120,7 @@ ident_complete:
addq %rbp, trampoline_level4_pgt + 0(%rip)
addq %rbp, trampoline_level4_pgt + (511*8)(%rip)
#endif
#ifdef CONFIG_ACPI_SLEEP
#ifdef CONFIG_ACPI
addq %rbp, wakeup_level4_pgt + 0(%rip)
addq %rbp, wakeup_level4_pgt + (511*8)(%rip)
#endif
......
......@@ -333,7 +333,7 @@ void __init setup_arch(char **cmdline_p)
reserve_bootmem_generic(SMP_TRAMPOLINE_BASE, 2*PAGE_SIZE);
#endif
#ifdef CONFIG_ACPI_SLEEP
#ifdef CONFIG_ACPI
/*
* Reserve low memory region for sleep support.
*/
......
......@@ -11,6 +11,9 @@ menuconfig ACPI
depends on PCI
depends on PM
select PNP
# for sleep
select HOTPLUG_CPU if X86 && SMP
select SUSPEND_SMP if X86 && SMP
default y
---help---
Advanced Configuration and Power Interface (ACPI) support for
......@@ -42,51 +45,26 @@ menuconfig ACPI
if ACPI
config ACPI_SLEEP
bool "Sleep States"
depends on X86 && (!SMP || SUSPEND_SMP)
default y
---help---
This option adds support for ACPI suspend states.
With this option, you will be able to put the system "to sleep".
Sleep states are low power states for the system and devices. All
of the system operating state is saved to either memory or disk
(depending on the state), to allow the system to resume operation
quickly at your request.
Although this option sounds really nifty, barely any of the device
drivers have been converted to the new driver model and hence few
have proper power management support.
This option is not recommended for anyone except those doing driver
power management development.
config ACPI_SLEEP_PROC_FS
bool
depends on ACPI_SLEEP && PROC_FS
default y
config ACPI_SLEEP_PROC_SLEEP
bool "/proc/acpi/sleep (deprecated)"
depends on ACPI_SLEEP_PROC_FS
default n
---help---
Create /proc/acpi/sleep
Deprecated by /sys/power/state
config ACPI_PROCFS
bool "Procfs interface (deprecated)"
default y
bool "Deprecated /proc/acpi files"
depends on PROC_FS
---help---
The Procfs interface for ACPI is made optional for backward compatibility.
As the same functions are duplicated in the sysfs interface
and this proc interface will be removed some time later,
it's marked as deprecated.
( /proc/acpi/debug_layer && debug_level are deprecated by
/sys/module/acpi/parameters/debug_layer && debug_level.
/proc/acpi/info is deprecated by
/sys/module/acpi/parameters/acpica_version )
For backwards compatibility, this option allows
depricated /proc/acpi/ files to exist, even when
they have been replaced by functions in /sys.
The deprecated files (and their replacements) include:
/proc/acpi/sleep (/sys/power/state)
/proc/acpi/info (/sys/modules/acpi/parameters/acpica_version)
/proc/acpi/dsdt (/sys/firmware/acpi/tables/DSDT)
/proc/acpi/fadt (/sys/firmware/acpi/tables/FACP)
/proc/acpi/debug_layer (/sys/module/acpi/parameters/debug_layer)
/proc/acpi/debug_level (/sys/module/acpi/parameters/debug_level)
This option has no effect on /proc/acpi/ files
and functions which do not yet exist in /sys.
Say N to delete /proc/acpi/ files that have moved to /sys/
config ACPI_AC
tristate "AC Adapter"
......
......@@ -34,7 +34,6 @@
#define ACPI_AC_COMPONENT 0x00020000
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_AC_HID "ACPI0003"
#define ACPI_AC_DEVICE_NAME "AC Adapter"
#define ACPI_AC_FILE_STATE "state"
#define ACPI_AC_NOTIFY_STATUS 0x80
......@@ -56,10 +55,16 @@ static int acpi_ac_add(struct acpi_device *device);
static int acpi_ac_remove(struct acpi_device *device, int type);
static int acpi_ac_open_fs(struct inode *inode, struct file *file);
const static struct acpi_device_id ac_device_ids[] = {
{"ACPI0003", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, ac_device_ids);
static struct acpi_driver acpi_ac_driver = {
.name = "ac",
.class = ACPI_AC_CLASS,
.ids = ACPI_AC_HID,
.ids = ac_device_ids,
.ops = {
.add = acpi_ac_add,
.remove = acpi_ac_remove,
......
......@@ -53,10 +53,16 @@ static int acpi_memory_device_add(struct acpi_device *device);
static int acpi_memory_device_remove(struct acpi_device *device, int type);
static int acpi_memory_device_start(struct acpi_device *device);
static const struct acpi_device_id memory_device_ids[] = {
{ACPI_MEMORY_DEVICE_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, memory_device_ids);
static struct acpi_driver acpi_memory_device_driver = {
.name = "acpi_memhotplug",
.class = ACPI_MEMORY_DEVICE_CLASS,
.ids = ACPI_MEMORY_DEVICE_HID,
.ids = memory_device_ids,
.ops = {
.add = acpi_memory_device_add,
.remove = acpi_memory_device_remove,
......
......@@ -56,7 +56,6 @@
#define ACPI_HOTK_NAME "Asus Laptop ACPI Extras Driver"
#define ACPI_HOTK_CLASS "hotkey"
#define ACPI_HOTK_DEVICE_NAME "Hotkey"
#define ACPI_HOTK_HID "ATK0100"
/*
* Some events we use, same for all Asus
......@@ -426,14 +425,20 @@ static struct acpi_table_header *asus_info;
static struct asus_hotk *hotk;
/*
* The hotkey driver declaration
* The hotkey driver and autoloading declaration
*/
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static const struct acpi_device_id asus_device_ids[] = {
{"ATK0100", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, asus_device_ids);
static struct acpi_driver asus_hotk_driver = {
.name = "asus_acpi",
.class = ACPI_HOTK_CLASS,
.ids = ACPI_HOTK_HID,
.ids = asus_device_ids,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
......
......@@ -41,7 +41,6 @@
#define ACPI_BATTERY_COMPONENT 0x00040000
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_BATTERY_HID "PNP0C0A"
#define ACPI_BATTERY_DEVICE_NAME "Battery"
#define ACPI_BATTERY_NOTIFY_STATUS 0x80
#define ACPI_BATTERY_NOTIFY_INFO 0x81
......@@ -74,10 +73,16 @@ static int acpi_battery_add(struct acpi_device *device);
static int acpi_battery_remove(struct acpi_device *device, int type);
static int acpi_battery_resume(struct acpi_device *device);
static const struct acpi_device_id battery_device_ids[] = {
{"PNP0C0A", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, battery_device_ids);
static struct acpi_driver acpi_battery_driver = {
.name = "battery",
.class = ACPI_BATTERY_CLASS,
.ids = ACPI_BATTERY_HID,
.ids = battery_device_ids,
.ops = {
.add = acpi_battery_add,
.resume = acpi_battery_resume,
......
......@@ -66,6 +66,16 @@ MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION("ACPI Button Driver");
MODULE_LICENSE("GPL");
static const struct acpi_device_id button_device_ids[] = {
{ACPI_BUTTON_HID_LID, 0},
{ACPI_BUTTON_HID_SLEEP, 0},
{ACPI_BUTTON_HID_SLEEPF, 0},
{ACPI_BUTTON_HID_POWER, 0},
{ACPI_BUTTON_HID_POWERF, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, button_device_ids);
static int acpi_button_add(struct acpi_device *device);
static int acpi_button_remove(struct acpi_device *device, int type);
static int acpi_button_info_open_fs(struct inode *inode, struct file *file);
......@@ -74,7 +84,7 @@ static int acpi_button_state_open_fs(struct inode *inode, struct file *file);
static struct acpi_driver acpi_button_driver = {
.name = "button",
.class = ACPI_BUTTON_CLASS,
.ids = "button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E",
.ids = button_device_ids,
.ops = {
.add = acpi_button_add,
.remove = acpi_button_remove,
......
......@@ -52,10 +52,18 @@ MODULE_LICENSE("GPL");
static int acpi_container_add(struct acpi_device *device);
static int acpi_container_remove(struct acpi_device *device, int type);
static const struct acpi_device_id container_device_ids[] = {
{"ACPI0004", 0},
{"PNP0A05", 0},
{"PNP0A06", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, container_device_ids);
static struct acpi_driver acpi_container_driver = {
.name = "container",
.class = ACPI_CONTAINER_CLASS,
.ids = "ACPI0004,PNP0A05,PNP0A06",
.ids = container_device_ids,
.ops = {
.add = acpi_container_add,
.remove = acpi_container_remove,
......
......@@ -41,7 +41,6 @@
#include <acpi/actypes.h>
#define ACPI_EC_CLASS "embedded_controller"
#define ACPI_EC_HID "PNP0C09"
#define ACPI_EC_DEVICE_NAME "Embedded Controller"
#define ACPI_EC_FILE_INFO "info"
......@@ -82,10 +81,15 @@ static int acpi_ec_start(struct acpi_device *device);
static int acpi_ec_stop(struct acpi_device *device, int type);
static int acpi_ec_add(struct acpi_device *device);
static const struct acpi_device_id ec_device_ids[] = {
{"PNP0C09", 0},
{"", 0},
};
static struct acpi_driver acpi_ec_driver = {
.name = "ec",
.class = ACPI_EC_CLASS,
.ids = ACPI_EC_HID,
.ids = ec_device_ids,
.ops = {
.add = acpi_ec_add,
.remove = acpi_ec_remove,
......
......@@ -378,7 +378,7 @@ static u8 acpi_ev_match_pci_root_bridge(char *id)
static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
{
acpi_status status;
struct acpi_device_id hid;
struct acpica_device_id hid;
struct acpi_compatible_id_list *cid;
acpi_native_uint i;
......
......@@ -50,10 +50,16 @@ static int acpi_fan_remove(struct acpi_device *device, int type);
static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
static int acpi_fan_resume(struct acpi_device *device);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, fan_device_ids);
static struct acpi_driver acpi_fan_driver = {
.name = "fan",
.class = ACPI_FAN_CLASS,
.ids = "PNP0C0B",
.ids = fan_device_ids,
.ops = {
.add = acpi_fan_add,
.remove = acpi_fan_remove,
......
......@@ -440,7 +440,7 @@ acpi_ns_get_device_callback(acpi_handle obj_handle,
acpi_status status;
struct acpi_namespace_node *node;
u32 flags;
struct acpi_device_id hid;
struct acpica_device_id hid;
struct acpi_compatible_id_list *cid;
acpi_native_uint i;
......
......@@ -46,7 +46,6 @@
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_link");
#define ACPI_PCI_LINK_CLASS "pci_irq_routing"
#define ACPI_PCI_LINK_HID "PNP0C0F"
#define ACPI_PCI_LINK_DEVICE_NAME "PCI Interrupt Link"
#define ACPI_PCI_LINK_FILE_INFO "info"
#define ACPI_PCI_LINK_FILE_STATUS "state"
......@@ -54,10 +53,16 @@ ACPI_MODULE_NAME("pci_link");
static int acpi_pci_link_add(struct acpi_device *device);
static int acpi_pci_link_remove(struct acpi_device *device, int type);
static struct acpi_device_id link_device_ids[] = {
{"PNP0C0F", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, link_device_ids);
static struct acpi_driver acpi_pci_link_driver = {
.name = "pci_link",
.class = ACPI_PCI_LINK_CLASS,
.ids = ACPI_PCI_LINK_HID,
.ids = link_device_ids,
.ops = {
.add = acpi_pci_link_add,
.remove = acpi_pci_link_remove,
......
......@@ -38,16 +38,21 @@
#define _COMPONENT ACPI_PCI_COMPONENT
ACPI_MODULE_NAME("pci_root");
#define ACPI_PCI_ROOT_CLASS "pci_bridge"
#define ACPI_PCI_ROOT_HID "PNP0A03"
#define ACPI_PCI_ROOT_DEVICE_NAME "PCI Root Bridge"
static int acpi_pci_root_add(struct acpi_device *device);
static int acpi_pci_root_remove(struct acpi_device *device, int type);
static int acpi_pci_root_start(struct acpi_device *device);
static struct acpi_device_id root_device_ids[] = {
{"PNP0A03", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, root_device_ids);
static struct acpi_driver acpi_pci_root_driver = {
.name = "pci_root",
.class = ACPI_PCI_ROOT_CLASS,
.ids = ACPI_PCI_ROOT_HID,
.ids = root_device_ids,
.ops = {
.add = acpi_pci_root_add,
.remove = acpi_pci_root_remove,
......
......@@ -59,10 +59,16 @@ static int acpi_power_remove(struct acpi_device *device, int type);
static int acpi_power_resume(struct acpi_device *device);
static int acpi_power_open_fs(struct inode *inode, struct file *file);
static struct acpi_device_id power_device_ids[] = {
{ACPI_POWER_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, power_device_ids);
static struct acpi_driver acpi_power_driver = {
.name = "power",
.class = ACPI_POWER_CLASS,
.ids = ACPI_POWER_HID,
.ids = power_device_ids,
.ops = {
.add = acpi_power_add,
.remove = acpi_power_remove,
......
......@@ -88,10 +88,16 @@ static int acpi_processor_handle_eject(struct acpi_processor *pr);
extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr);
static const struct acpi_device_id processor_device_ids[] = {
{ACPI_PROCESSOR_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, processor_device_ids);
static struct acpi_driver acpi_processor_driver = {
.name = "processor",
.class = ACPI_PROCESSOR_CLASS,
.ids = ACPI_PROCESSOR_HID,
.ids = processor_device_ids,
.ops = {
.add = acpi_processor_add,
.remove = acpi_processor_remove,
......
......@@ -47,6 +47,9 @@ ACPI_MODULE_NAME("processor_throttling");
static int acpi_processor_get_throttling(struct acpi_processor *pr);
int acpi_processor_set_throttling(struct acpi_processor *pr, int state);
/*
* _TPC - Throttling Present Capabilities
*/
static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
{
acpi_status status = 0;
......@@ -55,8 +58,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
if (!pr)
return -EINVAL;
status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC"));
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TPC"));
}
return -ENODEV;
}
pr->throttling_platform_limit = (int)tpc;
......@@ -68,9 +73,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
return acpi_processor_get_platform_limit(pr);
}
/* --------------------------------------------------------------------------
_PTC, _TSS, _TSD support
-------------------------------------------------------------------------- */
/*
* _PTC - Processor Throttling Control (and status) register location
*/
static int acpi_processor_get_throttling_control(struct acpi_processor *pr)
{
int result = 0;
......@@ -81,7 +86,9 @@ static int acpi_processor_get_throttling_control(struct acpi_processor *pr)
status = acpi_evaluate_object(pr->handle, "_PTC", NULL, &buffer);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC"));
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _PTC"));
}
return -ENODEV;
}
......@@ -132,6 +139,10 @@ static int acpi_processor_get_throttling_control(struct acpi_processor *pr)
return result;
}
/*
* _TSS - Throttling Supported States
*/
static int acpi_processor_get_throttling_states(struct acpi_processor *pr)
{
int result = 0;
......@@ -144,7 +155,9 @@ static int acpi_processor_get_throttling_states(struct acpi_processor *pr)
status = acpi_evaluate_object(pr->handle, "_TSS", NULL, &buffer);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS"));
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSS"));
}
return -ENODEV;
}
......@@ -201,6 +214,10 @@ static int acpi_processor_get_throttling_states(struct acpi_processor *pr)
return result;
}
/*
* _TSD - T-State Dependencies
*/
static int acpi_processor_get_tsd(struct acpi_processor *pr)
{
int result = 0;
......@@ -213,6 +230,9 @@ static int acpi_processor_get_tsd(struct acpi_processor *pr)
status = acpi_evaluate_object(pr->handle, "_TSD", NULL, &buffer);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
ACPI_EXCEPTION((AE_INFO, status, "Evaluating _TSD"));
}
return -ENODEV;
}
......@@ -525,9 +545,6 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
int result = 0;
int step = 0;
int i = 0;
int no_ptc = 0;
int no_tss = 0;
int no_tsd = 0;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"pblk_address[0x%08x] duty_offset[%d] duty_width[%d]\n",
......@@ -538,12 +555,14 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
if (!pr)
return -EINVAL;
/* TBD: Support ACPI 2.0 objects */
no_ptc = acpi_processor_get_throttling_control(pr);
no_tss = acpi_processor_get_throttling_states(pr);
no_tsd = acpi_processor_get_tsd(pr);
if (no_ptc || no_tss) {
/*
* Evaluate _PTC, _TSS and _TPC
* They must all be present or none of them can be used.
*/
if (acpi_processor_get_throttling_control(pr) ||
acpi_processor_get_throttling_states(pr) ||
acpi_processor_get_platform_limit(pr))
{
pr->throttling.acpi_processor_get_throttling =
&acpi_processor_get_throttling_fadt;
pr->throttling.acpi_processor_set_throttling =
......@@ -555,6 +574,8 @@ int acpi_processor_get_throttling_info(struct acpi_processor *pr)
&acpi_processor_set_throttling_ptc;
}
acpi_processor_get_tsd(pr);
if (!pr->throttling.address) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No throttling register\n"));
return 0;
......@@ -658,18 +679,20 @@ static int acpi_processor_throttling_seq_show(struct seq_file *seq,
pr->throttling.state_count - 1);
seq_puts(seq, "states:\n");
if (acpi_processor_get_throttling == acpi_processor_get_throttling_fadt)
if (pr->throttling.acpi_processor_get_throttling ==
acpi_processor_get_throttling_fadt) {
for (i = 0; i < pr->throttling.state_count; i++)
seq_printf(seq, " %cT%d: %02d%%\n",
(i == pr->throttling.state ? '*' : ' '), i,
(pr->throttling.states[i].performance ? pr->
throttling.states[i].performance / 10 : 0));
else
} else {
for (i = 0; i < pr->throttling.state_count; i++)
seq_printf(seq, " %cT%d: %02d%%\n",
(i == pr->throttling.state ? '*' : ' '), i,
(int)pr->throttling.states_tss[i].
freqpercentage);
}
end:
return 0;
......
......@@ -38,7 +38,6 @@
#define ACPI_SBS_CLASS "sbs"
#define ACPI_AC_CLASS "ac_adapter"
#define ACPI_BATTERY_CLASS "battery"
#define ACPI_SBS_HID "ACPI0002"
#define ACPI_SBS_DEVICE_NAME "Smart Battery System"
#define ACPI_SBS_FILE_INFO "info"
#define ACPI_SBS_FILE_STATE "state"
......@@ -124,10 +123,17 @@ static int acpi_sbs_add(struct acpi_device *device);
static int acpi_sbs_remove(struct acpi_device *device, int type);
static int acpi_sbs_resume(struct acpi_device *device);
static const struct acpi_device_id sbs_device_ids[] = {
{"ACPI0001", 0},
{"ACPI0005", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, sbs_device_ids);
static struct acpi_driver acpi_sbs_driver = {
.name = "sbs",
.class = ACPI_SBS_CLASS,
.ids = "ACPI0001,ACPI0005",
.ids = sbs_device_ids,
.ops = {
.add = acpi_sbs_add,
.remove = acpi_sbs_remove,
......
......@@ -16,7 +16,7 @@ ACPI_MODULE_NAME("scan");
extern struct acpi_device *acpi_root;
#define ACPI_BUS_CLASS "system_bus"
#define ACPI_BUS_HID "ACPI_BUS"
#define ACPI_BUS_HID "LNXSYBUS"
#define ACPI_BUS_DEVICE_NAME "System Bus"
static LIST_HEAD(acpi_device_list);
......@@ -29,6 +29,62 @@ struct acpi_device_bus_id{
unsigned int instance_no;
struct list_head node;
};
/*
* Creates hid/cid(s) string needed for modalias and uevent
* e.g. on a device with hid:IBM0001 and cid:ACPI0001 you get:
* char *modalias: "acpi:IBM0001:ACPI0001"
*/
int create_modalias(struct acpi_device *acpi_dev, char *modalias, int size){
int len;
if (!acpi_dev->flags.hardware_id)
return -ENODEV;
len = snprintf(modalias, size, "acpi:%s:",
acpi_dev->pnp.hardware_id);
if (len < 0 || len >= size)
return -EINVAL;
size -= len;
if (acpi_dev->flags.compatible_ids) {
struct acpi_compatible_id_list *cid_list;
int i;
int count;
cid_list = acpi_dev->pnp.cid_list;
for (i = 0; i < cid_list->count; i++) {
count = snprintf(&modalias[len], size, "%s:",
cid_list->id[i].value);
if (count < 0 || count >= size) {
printk(KERN_ERR "acpi: %s cid[%i] exceeds event buffer size",
acpi_dev->pnp.device_name, i);
break;
}
len += count;
size -= count;
}
}
modalias[len] = '\0';
return len;
}
static ssize_t
acpi_device_modalias_show(struct device *dev, struct device_attribute *attr, char *buf) {
struct acpi_device *acpi_dev = to_acpi_device(dev);
int len;
/* Device has no HID and no CID or string is >1024 */
len = create_modalias(acpi_dev, buf, 1024);
if (len <= 0)
return 0;
buf[len++] = '\n';
return len;
}
static DEVICE_ATTR(modalias, 0444, acpi_device_modalias_show, NULL);
static int acpi_eject_operation(acpi_handle handle, int lockable)
{
struct acpi_object_list arg_list;
......@@ -154,6 +210,12 @@ static int acpi_device_setup_files(struct acpi_device *dev)
goto end;
}
if (dev->flags.hardware_id || dev->flags.compatible_ids){
result = device_create_file(&dev->dev, &dev_attr_modalias);
if(result)
goto end;
}
/*
* If device has _EJ0, 'eject' file is created that is used to trigger
* hot-removal function from userland.
......@@ -178,6 +240,9 @@ static void acpi_device_remove_files(struct acpi_device *dev)
if (ACPI_SUCCESS(status))
device_remove_file(&dev->dev, &dev_attr_eject);
if (dev->flags.hardware_id || dev->flags.compatible_ids)
device_remove_file(&dev->dev, &dev_attr_modalias);
if(dev->flags.hardware_id)
device_remove_file(&dev->dev, &dev_attr_hid);
if(dev->handle)
......@@ -186,6 +251,37 @@ static void acpi_device_remove_files(struct acpi_device *dev)
/* --------------------------------------------------------------------------
ACPI Bus operations
-------------------------------------------------------------------------- */
int acpi_match_device_ids(struct acpi_device *device,
const struct acpi_device_id *ids)
{
const struct acpi_device_id *id;
if (device->flags.hardware_id) {
for (id = ids; id->id[0]; id++) {
if (!strcmp((char*)id->id, device->pnp.hardware_id))
return 0;
}
}
if (device->flags.compatible_ids) {
struct acpi_compatible_id_list *cid_list = device->pnp.cid_list;
int i;
for (id = ids; id->id[0]; id++) {
/* compare multiple _CID entries against driver ids */
for (i = 0; i < cid_list->count; i++) {
if (!strcmp((char*)id->id,
cid_list->id[i].value))
return 0;
}
}
}
return -ENOENT;
}
EXPORT_SYMBOL(acpi_match_device_ids);
static void acpi_device_release(struct device *dev)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
......@@ -219,37 +315,19 @@ static int acpi_bus_match(struct device *dev, struct device_driver *drv)
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
return !acpi_match_ids(acpi_dev, acpi_drv->ids);
return !acpi_match_device_ids(acpi_dev, acpi_drv->ids);
}
static int acpi_device_uevent(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size)
char *buffer, int buffer_size)
{
struct acpi_device *acpi_dev = to_acpi_device(dev);
int i = 0, length = 0, ret = 0;
if (acpi_dev->flags.hardware_id)
ret = add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"HWID=%s", acpi_dev->pnp.hardware_id);
if (ret)
return -ENOMEM;
if (acpi_dev->flags.compatible_ids) {
int j;
struct acpi_compatible_id_list *cid_list;
cid_list = acpi_dev->pnp.cid_list;
for (j = 0; j < cid_list->count; j++) {
ret = add_uevent_var(envp, num_envp, &i, buffer,
buffer_size, &length, "COMPTID=%s",
cid_list->id[j].value);
if (ret)
return -ENOMEM;
}
strcpy(buffer, "MODALIAS=");
if (create_modalias(acpi_dev, buffer + 9, buffer_size - 9) > 0) {
envp[0] = buffer;
envp[1] = NULL;
}
envp[i] = NULL;
return 0;
}
......@@ -543,25 +621,6 @@ void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context)
return;
}
int acpi_match_ids(struct acpi_device *device, char *ids)
{
if (device->flags.hardware_id)
if (strstr(ids, device->pnp.hardware_id))
return 0;
if (device->flags.compatible_ids) {
struct acpi_compatible_id_list *cid_list = device->pnp.cid_list;
int i;
/* compare multiple _CID entries against driver ids */
for (i = 0; i < cid_list->count; i++) {
if (strstr(ids, cid_list->id[i].value))
return 0;
}
}
return -ENOENT;
}
static int acpi_bus_get_perf_flags(struct acpi_device *device)
{
device->performance.state = ACPI_STATE_UNKNOWN;
......@@ -624,6 +683,13 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *package = NULL;
struct acpi_device_id button_device_ids[] = {
{"PNP0C0D", 0},
{"PNP0C0C", 0},
{"PNP0C0E", 0},
{"", 0},
};
/* _PRW */
status = acpi_evaluate_object(device->handle, "_PRW", NULL, &buffer);
......@@ -643,7 +709,7 @@ static int acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
device->wakeup.flags.valid = 1;
/* Power button, Lid switch always enable wakeup */
if (!acpi_match_ids(device, "PNP0C0D,PNP0C0C,PNP0C0E"))
if (!acpi_match_device_ids(device, button_device_ids))
device->wakeup.flags.run_wake = 1;
end:
......
obj-y := poweroff.o wakeup.o
obj-$(CONFIG_ACPI_SLEEP) += main.o
obj-$(CONFIG_ACPI_SLEEP_PROC_FS) += proc.o
obj-y += main.o
obj-$(CONFIG_X86) += proc.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
......@@ -34,35 +34,55 @@ static u32 acpi_suspend_states[] = {
static int init_8259A_after_S1;
extern int acpi_sleep_prepare(u32 acpi_state);
extern void acpi_power_off(void);
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
/**
* acpi_pm_set_target - Set the target system sleep state to the state
* associated with given @pm_state, if supported.
*/
static int acpi_pm_set_target(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
int error = 0;
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
error = -ENOSYS;
}
return error;
}
/**
* acpi_pm_prepare - Do preliminary suspend work.
* @pm_state: suspend state we're entering.
* @pm_state: ignored
*
* Make sure we support the state. If we do, and we need it, set the
* firmware waking vector and do arch-specific nastiness to get the
* wakeup code to the waking vector.
* If necessary, set the firmware waking vector and do arch-specific
* nastiness to get the wakeup code to the waking vector.
*/
extern int acpi_sleep_prepare(u32 acpi_state);
extern void acpi_power_off(void);
static int acpi_pm_prepare(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
int error = acpi_sleep_prepare(acpi_target_sleep_state);
if (!sleep_states[acpi_state]) {
printk("acpi_pm_prepare does not support %d \n", pm_state);
return -EPERM;
}
return acpi_sleep_prepare(acpi_state);
if (error)
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
/**
* acpi_pm_enter - Actually enter a sleep state.
* @pm_state: State we're entering.
* @pm_state: ignored
*
* Flush caches and go to sleep. For STR or STD, we have to call
* arch-specific assembly, which in turn call acpi_enter_sleep_state().
* Flush caches and go to sleep. For STR we have to call arch-specific
* assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
......@@ -70,31 +90,31 @@ static int acpi_pm_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
unsigned long flags = 0;
u32 acpi_state = acpi_suspend_states[pm_state];
u32 acpi_state = acpi_target_sleep_state;
ACPI_FLUSH_CPU_CACHE();
/* Do arch specific saving of state. */
if (pm_state > PM_SUSPEND_STANDBY) {
if (acpi_state == ACPI_STATE_S3) {
int error = acpi_save_state_mem();
if (error)
if (error) {
acpi_target_sleep_state = ACPI_STATE_S0;
return error;
}
}
local_irq_save(flags);
acpi_enable_wakeup_device(acpi_state);
switch (pm_state) {
case PM_SUSPEND_STANDBY:
switch (acpi_state) {
case ACPI_STATE_S1:
barrier();
status = acpi_enter_sleep_state(acpi_state);
break;
case PM_SUSPEND_MEM:
case ACPI_STATE_S3:
do_suspend_lowlevel();
break;
default:
return -EINVAL;
}
/* ACPI 3.0 specs (P62) says that it's the responsabilty
......@@ -107,12 +127,8 @@ static int acpi_pm_enter(suspend_state_t pm_state)
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
/* restore processor state
* We should only be here if we're coming back from STR or STD.
* And, in the case of the latter, the memory image should have already
* been loaded from disk.
*/
if (pm_state > PM_SUSPEND_STANDBY)
/* restore processor state */
if (acpi_state == ACPI_STATE_S3)
acpi_restore_state_mem();
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
......@@ -120,7 +136,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
/**
* acpi_pm_finish - Finish up suspend sequence.
* @pm_state: State we're coming out of.
* @pm_state: ignored
*
* This is called after we wake back up (or if entering the sleep state
* failed).
......@@ -128,7 +144,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
static int acpi_pm_finish(suspend_state_t pm_state)
{
u32 acpi_state = acpi_suspend_states[pm_state];
u32 acpi_state = acpi_target_sleep_state;
acpi_leave_sleep_state(acpi_state);
acpi_disable_wakeup_device(acpi_state);
......@@ -136,10 +152,14 @@ static int acpi_pm_finish(suspend_state_t pm_state)
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
acpi_target_sleep_state = ACPI_STATE_S0;
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
printk("Broken toshiba laptop -> kicking interrupts\n");
init_8259A(0);
}
#endif
return 0;
}
......@@ -176,6 +196,7 @@ static int acpi_pm_state_valid(suspend_state_t pm_state)
static struct pm_ops acpi_pm_ops = {
.valid = acpi_pm_state_valid,
.set_target = acpi_pm_set_target,
.prepare = acpi_pm_prepare,
.enter = acpi_pm_enter,
.finish = acpi_pm_finish,
......@@ -235,6 +256,81 @@ static struct hibernation_ops acpi_hibernation_ops = {
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
/**
* acpi_pm_device_sleep_state - return preferred power state of ACPI device
* in the system sleep state given by %acpi_target_sleep_state
* @dev: device to examine
* @wake: if set, the device should be able to wake up the system
* @d_min_p: used to store the upper limit of allowed states range
* Return value: preferred power state of the device on success, -ENODEV on
* failure (ie. if there's no 'struct acpi_device' for @dev)
*
* Find the lowest power (highest number) ACPI device power state that
* device @dev can be in while the system is in the sleep state represented
* by %acpi_target_sleep_state. If @wake is nonzero, the device should be
* able to wake up the system from this sleep state. If @d_min_p is set,
* the highest power (lowest number) device power state of @dev allowed
* in this system sleep state is stored at the location pointed to by it.
*
* The caller must ensure that @dev is valid before using this function.
* The caller is also responsible for figuring out if the device is
* supposed to be able to wake up the system and passing this information
* via @wake.
*/
int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
struct acpi_device *adev;
char acpi_method[] = "_SxD";
unsigned long d_min, d_max;
if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
printk(KERN_ERR "ACPI handle has no context!\n");
return -ENODEV;
}
acpi_method[2] = '0' + acpi_target_sleep_state;
/*
* If the sleep state is S0, we will return D3, but if the device has
* _S0W, we will use the value from _S0W
*/
d_min = ACPI_STATE_D0;
d_max = ACPI_STATE_D3;
/*
* If present, _SxD methods return the minimum D-state (highest power
* state) we can use for the corresponding S-states. Otherwise, the
* minimum D-state is D0 (ACPI 3.x).
*
* NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
* provided -- that's our fault recovery, we ignore retval.
*/
if (acpi_target_sleep_state > ACPI_STATE_S0)
acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
/*
* If _PRW says we can wake up the system from the target sleep state,
* the D-state returned by _SxD is sufficient for that (we assume a
* wakeup-aware driver if wake is set). Still, if _SxW exists
* (ACPI 3.x), it should return the maximum (lowest power) D-state that
* can wake the system. _S0W may be valid, too.
*/
if (acpi_target_sleep_state == ACPI_STATE_S0 ||
(wake && adev->wakeup.state.enabled &&
adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
acpi_method[3] = 'W';
acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
/* Sanity check */
if (d_max < d_min)
d_min = d_max;
}
if (d_min_p)
*d_min_p = d_min;
return d_max;
}
/*
* Toshiba fails to preserve interrupts over S1, reinitialization
* of 8259 is needed after S1 resume.
......
......@@ -18,7 +18,6 @@
int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
/* do we have a wakeup address for S2 and S3? */
if (acpi_state == ACPI_STATE_S3) {
if (!acpi_wakeup_address) {
......@@ -31,7 +30,6 @@ int acpi_sleep_prepare(u32 acpi_state)
}
ACPI_FLUSH_CPU_CACHE();
acpi_enable_wakeup_device_prep(acpi_state);
#endif
acpi_gpe_sleep_prepare(acpi_state);
acpi_enter_sleep_state_prep(acpi_state);
return 0;
......
......@@ -14,8 +14,16 @@
#include "sleep.h"
#define _COMPONENT ACPI_SYSTEM_COMPONENT
/*
* this file provides support for:
* /proc/acpi/sleep
* /proc/acpi/alarm
* /proc/acpi/wakeup
*/
ACPI_MODULE_NAME("sleep")
#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
#ifdef CONFIG_ACPI_PROCFS
static int acpi_system_sleep_seq_show(struct seq_file *seq, void *offset)
{
int i;
......@@ -68,7 +76,7 @@ acpi_system_write_sleep(struct file *file,
Done:
return error ? error : count;
}
#endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */
#endif /* CONFIG_ACPI_PROCFS */
#if defined(CONFIG_RTC_DRV_CMOS) || defined(CONFIG_RTC_DRV_CMOS_MODULE)
/* use /sys/class/rtc/rtcX/wakealarm instead; it's not ACPI-specific */
......@@ -463,7 +471,7 @@ static const struct file_operations acpi_system_wakeup_device_fops = {
.release = single_release,
};
#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
#ifdef CONFIG_ACPI_PROCFS
static const struct file_operations acpi_system_sleep_fops = {
.open = acpi_system_sleep_open_fs,
.read = seq_read,
......@@ -471,7 +479,7 @@ static const struct file_operations acpi_system_sleep_fops = {
.llseek = seq_lseek,
.release = single_release,
};
#endif /* CONFIG_ACPI_SLEEP_PROC_SLEEP */
#endif /* CONFIG_ACPI_PROCFS */
#ifdef HAVE_ACPI_LEGACY_ALARM
static const struct file_operations acpi_system_alarm_fops = {
......@@ -498,14 +506,14 @@ static int __init acpi_sleep_proc_init(void)
if (acpi_disabled)
return 0;
#ifdef CONFIG_ACPI_SLEEP_PROC_SLEEP
#ifdef CONFIG_ACPI_PROCFS
/* 'sleep' [R/W] */
entry =
create_proc_entry("sleep", S_IFREG | S_IRUGO | S_IWUSR,
acpi_root_dir);
if (entry)
entry->proc_fops = &acpi_system_sleep_fops;
#endif
#endif /* CONFIG_ACPI_PROCFS */
#ifdef HAVE_ACPI_LEGACY_ALARM
/* 'alarm' [R/W] */
......
......@@ -17,7 +17,6 @@ ACPI_MODULE_NAME("wakeup_devices")
extern struct list_head acpi_wakeup_device_list;
extern spinlock_t acpi_device_lock;
#ifdef CONFIG_ACPI_SLEEP
/**
* acpi_enable_wakeup_device_prep - prepare wakeup devices
* @sleep_state: ACPI state
......@@ -180,7 +179,6 @@ static int __init acpi_wakeup_device_init(void)
}
late_initcall(acpi_wakeup_device_init);
#endif
/*
* Disable all wakeup GPEs before entering requested sleep state.
......
......@@ -92,10 +92,16 @@ static int acpi_thermal_polling_open_fs(struct inode *inode, struct file *file);
static ssize_t acpi_thermal_write_polling(struct file *, const char __user *,
size_t, loff_t *);
static const struct acpi_device_id thermal_device_ids[] = {
{ACPI_THERMAL_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, thermal_device_ids);
static struct acpi_driver acpi_thermal_driver = {
.name = "thermal",
.class = ACPI_THERMAL_CLASS,
.ids = ACPI_THERMAL_HID,
.ids = thermal_device_ids,
.ops = {
.add = acpi_thermal_add,
.remove = acpi_thermal_remove,
......
......@@ -407,7 +407,7 @@ acpi_ut_copy_id_string(char *destination, char *source, acpi_size max_length)
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
struct acpi_device_id *hid)
struct acpica_device_id *hid)
{
union acpi_operand_object *obj_desc;
acpi_status status;
......@@ -609,7 +609,7 @@ acpi_ut_execute_CID(struct acpi_namespace_node * device_node,
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
struct acpi_device_id *uid)
struct acpica_device_id *uid)
{
union acpi_operand_object *obj_desc;
acpi_status status;
......
......@@ -74,10 +74,16 @@ MODULE_LICENSE("GPL");
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static const struct acpi_device_id video_device_ids[] = {
{ACPI_VIDEO_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, video_device_ids);
static struct acpi_driver acpi_video_bus = {
.name = "video",
.class = ACPI_VIDEO_CLASS,
.ids = ACPI_VIDEO_HID,
.ids = video_device_ids,
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
......
......@@ -1007,9 +1007,15 @@ static int hpet_acpi_remove(struct acpi_device *device, int type)
return -EINVAL;
}
static const struct acpi_device_id hpet_device_ids[] = {
{"PNP0103", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, hpet_device_ids);
static struct acpi_driver hpet_acpi_driver = {
.name = "hpet",
.ids = "PNP0103",
.ids = hpet_device_ids,
.ops = {
.add = hpet_acpi_add,
.remove = hpet_acpi_remove,
......
......@@ -31,7 +31,6 @@
#define ACPI_ATLAS_NAME "Atlas ACPI"
#define ACPI_ATLAS_CLASS "Atlas"
#define ACPI_ATLAS_BUTTON_HID "ASIM0000"
static struct input_dev *input_dev;
......@@ -130,10 +129,16 @@ static int atlas_acpi_button_remove(struct acpi_device *device, int type)
return status;
}
static const struct acpi_device_id atlas_device_ids[] = {
{"ASIM0000", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, atlas_device_ids);
static struct acpi_driver atlas_acpi_driver = {
.name = ACPI_ATLAS_NAME,
.class = ACPI_ATLAS_CLASS,
.ids = ACPI_ATLAS_BUTTON_HID,
.ids = atlas_device_ids,
.ops = {
.add = atlas_acpi_button_add,
.remove = atlas_acpi_button_remove,
......
......@@ -53,7 +53,6 @@
#define ASUS_HOTK_NAME "Asus Laptop Support"
#define ASUS_HOTK_CLASS "hotkey"
#define ASUS_HOTK_DEVICE_NAME "Hotkey"
#define ASUS_HOTK_HID "ATK0100"
#define ASUS_HOTK_FILE "asus-laptop"
#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
......@@ -197,12 +196,18 @@ static struct asus_hotk *hotk;
/*
* The hotkey driver declaration
*/
static const struct acpi_device_id asus_device_ids[] = {
{"ATK0100", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, asus_device_ids);
static int asus_hotk_add(struct acpi_device *device);
static int asus_hotk_remove(struct acpi_device *device, int type);
static struct acpi_driver asus_hotk_driver = {
.name = ASUS_HOTK_NAME,
.class = ASUS_HOTK_CLASS,
.ids = ASUS_HOTK_HID,
.ids = asus_device_ids,
.ops = {
.add = asus_hotk_add,
.remove = asus_hotk_remove,
......
......@@ -1124,10 +1124,22 @@ static int sony_nc_remove(struct acpi_device *device, int type)
return 0;
}
static const struct acpi_device_id sony_device_ids[] = {
{SONY_NC_HID, 0},
{SONY_PIC_HID, 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, sony_device_ids);
static const struct acpi_device_id sony_nc_device_ids[] = {
{SONY_NC_HID, 0},
{"", 0},
};
static struct acpi_driver sony_nc_driver = {
.name = SONY_NC_DRIVER_NAME,
.class = SONY_NC_CLASS,
.ids = SONY_NC_HID,
.ids = sony_nc_device_ids,
.owner = THIS_MODULE,
.ops = {
.add = sony_nc_add,
......@@ -2470,10 +2482,15 @@ static int sony_pic_resume(struct acpi_device *device)
return 0;
}
static const struct acpi_device_id sony_pic_device_ids[] = {
{SONY_PIC_HID, 0},
{"", 0},
};
static struct acpi_driver sony_pic_driver = {
.name = SONY_PIC_DRIVER_NAME,
.class = SONY_PIC_CLASS,
.ids = SONY_PIC_HID,
.ids = sony_pic_device_ids,
.owner = THIS_MODULE,
.ops = {
.add = sony_pic_add,
......
......@@ -411,12 +411,13 @@ static int __init register_tpacpi_subdriver(struct ibm_struct *ibm)
sprintf(ibm->acpi->driver->name, "%s_%s", IBM_NAME, ibm->name);
ibm->acpi->driver->ids = ibm->acpi->hid;
ibm->acpi->driver->ops.add = &tpacpi_device_add;
rc = acpi_bus_register_driver(ibm->acpi->driver);
if (rc < 0) {
printk(IBM_ERR "acpi_bus_register_driver(%s) failed: %d\n",
ibm->acpi->hid, rc);
ibm->name, rc);
kfree(ibm->acpi->driver);
ibm->acpi->driver = NULL;
} else if (!rc)
......@@ -1316,8 +1317,13 @@ static int hotkey_write(char *buf)
return res;
}
static const struct acpi_device_id ibm_htk_device_ids[] = {
{IBM_HKEY_HID, 0},
{"", 0},
};
static struct tp_acpi_drv_struct ibm_hotkey_acpidriver = {
.hid = IBM_HKEY_HID,
.hid = ibm_htk_device_ids,
.notify = hotkey_notify,
.handle = &hkey_handle,
.type = ACPI_DEVICE_NOTIFY,
......@@ -2080,6 +2086,11 @@ IBM_HANDLE(dock, root, "\\_SB.GDCK", /* X30, X31, X40 */
/* don't list other alternatives as we install a notify handler on the 570 */
IBM_HANDLE(pci, root, "\\_SB.PCI"); /* 570 */
static const struct acpi_device_id ibm_pci_device_ids[] = {
{PCI_ROOT_HID_STRING, 0},
{"", 0},
};
static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
{
.notify = dock_notify,
......@@ -2090,7 +2101,7 @@ static struct tp_acpi_drv_struct ibm_dock_acpidriver[2] = {
/* THIS ONE MUST NEVER BE USED FOR DRIVER AUTOLOADING.
* We just use it to get notifications of dock hotplug
* in very old thinkpads */
.hid = PCI_ROOT_HID_STRING,
.hid = ibm_pci_device_ids,
.notify = dock_notify,
.handle = &pci_handle,
.type = ACPI_SYSTEM_NOTIFY,
......@@ -2149,7 +2160,8 @@ static int __init dock_init2(struct ibm_init_struct *iibm)
static void dock_notify(struct ibm_struct *ibm, u32 event)
{
int docked = dock_docked();
int pci = ibm->acpi->hid && strstr(ibm->acpi->hid, PCI_ROOT_HID_STRING);
int pci = ibm->acpi->hid && ibm->acpi->device &&
acpi_match_device_ids(ibm->acpi->device, ibm_pci_device_ids);
if (event == 1 && !pci) /* 570 */
acpi_bus_generate_event(ibm->acpi->device, event, 1); /* button */
......
......@@ -193,7 +193,7 @@ static void thinkpad_acpi_module_exit(void);
struct ibm_struct;
struct tp_acpi_drv_struct {
char *hid;
const struct acpi_device_id *hid;
struct acpi_driver *driver;
void (*notify) (struct ibm_struct *, u32);
......
......@@ -245,16 +245,33 @@ EXPORT_SYMBOL(pci_osc_control_set);
* currently we simply return _SxD, if present.
*/
static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state)
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
pm_message_t state)
{
/* TBD */
return -ENODEV;
int acpi_state;
acpi_state = acpi_pm_device_sleep_state(&pdev->dev,
device_may_wakeup(&pdev->dev), NULL);
if (acpi_state < 0)
return PCI_POWER_ERROR;
switch (acpi_state) {
case ACPI_STATE_D0:
return PCI_D0;
case ACPI_STATE_D1:
return PCI_D1;
case ACPI_STATE_D2:
return PCI_D2;
case ACPI_STATE_D3:
return PCI_D3hot;
}
return PCI_POWER_ERROR;
}
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
acpi_handle tmp;
static int state_conv[] = {
[0] = 0,
[1] = 1,
......@@ -266,6 +283,9 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
if (!handle)
return -ENODEV;
/* If the ACPI device has _EJ0, ignore the device */
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
return 0;
return acpi_bus_set_power(handle, acpi_state);
}
......
......@@ -499,7 +499,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
/**
* pci_choose_state - Choose the power state of a PCI device
......@@ -513,15 +513,15 @@ int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
int ret;
pci_power_t ret;
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
if (ret >= 0)
state.event = ret;
if (ret != PCI_POWER_ERROR)
return ret;
}
switch (state.event) {
......
......@@ -12,7 +12,7 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t, resource_size_t),
void *alignf_data);
/* Firmware callbacks */
extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
......
......@@ -167,6 +167,8 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state)
return error;
}
if (pnp_dev->protocol && pnp_dev->protocol->suspend)
pnp_dev->protocol->suspend(pnp_dev, state);
return 0;
}
......@@ -179,6 +181,9 @@ static int pnp_bus_resume(struct device *dev)
if (!pnp_drv)
return 0;
if (pnp_dev->protocol && pnp_dev->protocol->resume)
pnp_dev->protocol->resume(pnp_dev);
if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
error = pnp_start_dev(pnp_dev);
if (error)
......
......@@ -21,7 +21,10 @@
#include <linux/acpi.h>
#include <linux/pnp.h>
#include <linux/mod_devicetable.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
#include "pnpacpi.h"
static int num = 0;
......@@ -33,15 +36,17 @@ static int num = 0;
* have irqs (PIC, Timer) because we call acpi_register_gsi.
* Finaly only devices that have a CRS method need to be in this list.
*/
static char __initdata excluded_id_list[] =
"PNP0C09," /* EC */
"PNP0C0F," /* Link device */
"PNP0000," /* PIC */
"PNP0100," /* Timer */
;
static __initdata struct acpi_device_id excluded_id_list[] ={
{"PNP0C09", 0}, /* EC */
{"PNP0C0F", 0}, /* Link device */
{"PNP0000", 0}, /* PIC */
{"PNP0100", 0}, /* Timer */
{"", 0},
};
static inline int is_exclusive_device(struct acpi_device *dev)
{
return (!acpi_match_ids(dev, excluded_id_list));
return (!acpi_match_device_ids(dev, excluded_id_list));
}
/*
......@@ -119,11 +124,25 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
return ACPI_FAILURE(status) ? -ENODEV : 0;
}
static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
{
return acpi_bus_set_power((acpi_handle)dev->data,
acpi_pm_device_sleep_state(&dev->dev,
device_may_wakeup(&dev->dev), NULL));
}
static int pnpacpi_resume(struct pnp_dev *dev)
{
return acpi_bus_set_power((acpi_handle)dev->data, ACPI_STATE_D0);
}
static struct pnp_protocol pnpacpi_protocol = {
.name = "Plug and Play ACPI",
.get = pnpacpi_get_resources,
.set = pnpacpi_set_resources,
.disable = pnpacpi_disable_resources,
.suspend = pnpacpi_suspend,
.resume = pnpacpi_resume,
};
static int __init pnpacpi_add_device(struct acpi_device *device)
......
......@@ -131,7 +131,7 @@ struct acpi_device_ops {
struct acpi_driver {
char name[80];
char class[80];
char *ids; /* Supported Hardware IDs */
const struct acpi_device_id *ids; /* Supported Hardware IDs */
struct acpi_device_ops ops;
struct device_driver drv;
struct module *owner;
......@@ -341,7 +341,8 @@ int acpi_bus_add(struct acpi_device **child, struct acpi_device *parent,
int acpi_bus_trim(struct acpi_device *start, int rmdevice);
int acpi_bus_start(struct acpi_device *device);
acpi_status acpi_bus_get_ejd(acpi_handle handle, acpi_handle * ejd);
int acpi_match_ids(struct acpi_device *device, char *ids);
int acpi_match_device_ids(struct acpi_device *device,
const struct acpi_device_id *ids);
int acpi_create_dir(struct acpi_device *);
void acpi_remove_dir(struct acpi_device *);
......@@ -365,6 +366,8 @@ acpi_handle acpi_get_child(acpi_handle, acpi_integer);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
int acpi_pm_device_sleep_state(struct device *, int, int *);
#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/
......@@ -34,16 +34,21 @@
#define ACPI_BUS_COMPONENT 0x00010000
#define ACPI_SYSTEM_COMPONENT 0x02000000
/* _HID definitions */
/*
* _HID definitions
* HIDs must conform to ACPI spec(6.1.4)
* Linux specific HIDs do not apply to this and begin with LNX:
*/
#define ACPI_POWER_HID "power_resource"
#define ACPI_POWER_HID "LNXPOWER"
#define ACPI_PROCESSOR_HID "ACPI0007"
#define ACPI_SYSTEM_HID "acpi_system"
#define ACPI_THERMAL_HID "thermal"
#define ACPI_BUTTON_HID_POWERF "button_power"
#define ACPI_BUTTON_HID_SLEEPF "button_sleep"
#define ACPI_VIDEO_HID "video"
#define ACPI_BAY_HID "bay"
#define ACPI_SYSTEM_HID "LNXSYSTM"
#define ACPI_THERMAL_HID "LNXTHERM"
#define ACPI_BUTTON_HID_POWERF "LNXPWRBN"
#define ACPI_BUTTON_HID_SLEEPF "LNXSLPBN"
#define ACPI_VIDEO_HID "LNXVIDEO"
#define ACPI_BAY_HID "LNXIOBAY"
/* --------------------------------------------------------------------------
PCI
-------------------------------------------------------------------------- */
......@@ -142,10 +147,6 @@ static inline void unregister_hotplug_dock_device(acpi_handle handle)
/*--------------------------------------------------------------------------
Suspend/Resume
-------------------------------------------------------------------------- */
#ifdef CONFIG_ACPI_SLEEP
extern int acpi_sleep_init(void);
#else
#define acpi_sleep_init() do {} while (0)
#endif
#endif /*__ACPI_DRIVERS_H__*/
......@@ -809,7 +809,7 @@ acpi_status(*acpi_walk_callback) (acpi_handle obj_handle,
/* Common string version of device HIDs and UIDs */
struct acpi_device_id {
struct acpica_device_id {
char value[ACPI_DEVICE_ID_LENGTH];
};
......@@ -859,8 +859,8 @@ struct acpi_device_info {
u32 valid; /* Indicates which fields below are valid */
u32 current_status; /* _STA value */
acpi_integer address; /* _ADR value if any */
struct acpi_device_id hardware_id; /* _HID value if any */
struct acpi_device_id unique_id; /* _UID value if any */
struct acpica_device_id hardware_id; /* _HID value if any */
struct acpica_device_id unique_id; /* _UID value if any */
u8 highest_dstates[4]; /* _sx_d values: 0xFF indicates not valid */
struct acpi_compatible_id_list compatibility_id; /* List of _CIDs if any */
};
......
......@@ -354,7 +354,7 @@ acpi_ut_evaluate_numeric_object(char *object_name,
acpi_status
acpi_ut_execute_HID(struct acpi_namespace_node *device_node,
struct acpi_device_id *hid);
struct acpica_device_id *hid);
acpi_status
acpi_ut_execute_CID(struct acpi_namespace_node *device_node,
......@@ -366,7 +366,7 @@ acpi_ut_execute_STA(struct acpi_namespace_node *device_node,
acpi_status
acpi_ut_execute_UID(struct acpi_namespace_node *device_node,
struct acpi_device_id *uid);
struct acpica_device_id *uid);
acpi_status
acpi_ut_execute_sxds(struct acpi_namespace_node *device_node, u8 * highest);
......
......@@ -121,19 +121,6 @@ static inline void acpi_disable_pci(void)
}
extern int acpi_irq_balance_set(char *str);
#else /* !CONFIG_ACPI */
#define acpi_lapic 0
#define acpi_ioapic 0
static inline void acpi_noirq_set(void) { }
static inline void acpi_disable_pci(void) { }
static inline void disable_acpi(void) { }
#endif /* !CONFIG_ACPI */
#ifdef CONFIG_ACPI_SLEEP
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
extern void acpi_restore_state_mem(void);
......@@ -143,7 +130,15 @@ extern unsigned long acpi_wakeup_address;
/* early initialization routine */
extern void acpi_reserve_bootmem(void);
#endif /*CONFIG_ACPI_SLEEP*/
#else /* !CONFIG_ACPI */
#define acpi_lapic 0
#define acpi_ioapic 0
static inline void acpi_noirq_set(void) { }
static inline void acpi_disable_pci(void) { }
static inline void disable_acpi(void) { }
#endif /* !CONFIG_ACPI */
#define ARCH_HAS_POWER_INIT 1
......
......@@ -21,7 +21,7 @@ struct saved_context {
unsigned long return_address;
} __attribute__((packed));
#ifdef CONFIG_ACPI_SLEEP
#ifdef CONFIG_ACPI
extern unsigned long saved_eip;
extern unsigned long saved_esp;
extern unsigned long saved_ebp;
......
......@@ -100,6 +100,11 @@ const char *acpi_get_sysname (void);
int acpi_request_vector (u32 int_type);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
extern void acpi_restore_state_mem(void);
extern unsigned long acpi_wakeup_address;
/*
* Record the cpei override flag and current logical cpu. This is
* useful for CPU removal.
......
......@@ -108,6 +108,15 @@ static inline void acpi_disable_pci(void)
}
extern int acpi_irq_balance_set(char *str);
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
extern void acpi_restore_state_mem(void);
extern unsigned long acpi_wakeup_address;
/* early initialization routine */
extern void acpi_reserve_bootmem(void);
#else /* !CONFIG_ACPI */
#define acpi_lapic 0
......@@ -121,19 +130,6 @@ extern int acpi_numa;
extern int acpi_scan_nodes(unsigned long start, unsigned long end);
#define NR_NODE_MEMBLKS (MAX_NUMNODES*2)
#ifdef CONFIG_ACPI_SLEEP
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
extern void acpi_restore_state_mem(void);
extern unsigned long acpi_wakeup_address;
/* early initialization routine */
extern void acpi_reserve_bootmem(void);
#endif /*CONFIG_ACPI_SLEEP*/
extern int acpi_disabled;
extern int acpi_pci_disabled;
......
......@@ -44,7 +44,6 @@ extern unsigned long saved_context_eflags;
extern void fix_processor_context(void);
#ifdef CONFIG_ACPI_SLEEP
extern unsigned long saved_rip;
extern unsigned long saved_rsp;
extern unsigned long saved_rbp;
......@@ -54,4 +53,3 @@ extern unsigned long saved_rdi;
/* routines for saving/restoring kernel state */
extern int acpi_save_state_mem(void);
#endif
......@@ -33,6 +33,7 @@
#endif
#include <linux/list.h>
#include <linux/mod_devicetable.h>
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
......
......@@ -159,6 +159,12 @@ struct ap_device_id {
#define AP_DEVICE_ID_MATCH_DEVICE_TYPE 0x01
#define ACPI_ID_LEN 9
struct acpi_device_id {
__u8 id[ACPI_ID_LEN];
kernel_ulong_t driver_data;
};
#define PNP_ID_LEN 8
#define PNP_MAX_DEVICES 8
......
......@@ -335,6 +335,10 @@ struct pnp_protocol {
int (*set)(struct pnp_dev *dev, struct pnp_resource_table *res);
int (*disable)(struct pnp_dev *dev);
/* protocol specific suspend/resume */
int (*suspend)(struct pnp_dev *dev, pm_message_t state);
int (*resume)(struct pnp_dev *dev);
/* used by pnp layer only (look but don't touch) */
unsigned char number; /* protocol number*/
struct device dev; /* link to driver model */
......
......@@ -689,7 +689,7 @@ static ctl_table kern_table[] = {
.proc_handler = &proc_dointvec,
},
#endif
#ifdef CONFIG_ACPI_SLEEP
#if defined(CONFIG_ACPI) && defined(CONFIG_X86)
{
.ctl_name = KERN_ACPI_VIDEO_FLAGS,
.procname = "acpi_video_flags",
......
......@@ -290,6 +290,14 @@ static int do_serio_entry(const char *filename,
return 1;
}
/* looks like: "acpi:ACPI0003 or acpi:PNP0C0B" or "acpi:LNXVIDEO" */
static int do_acpi_entry(const char *filename,
struct acpi_device_id *id, char *alias)
{
sprintf(alias, "acpi*:%s:", id->id);
return 1;
}
/* looks like: "pnp:dD" */
static int do_pnp_entry(const char *filename,
struct pnp_device_id *id, char *alias)
......@@ -551,6 +559,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info,
do_table(symval, sym->st_size,
sizeof(struct serio_device_id), "serio",
do_serio_entry, mod);
else if (sym_is(symname, "__mod_acpi_device_table"))
do_table(symval, sym->st_size,
sizeof(struct acpi_device_id), "acpi",
do_acpi_entry, mod);
else if (sym_is(symname, "__mod_pnp_device_table"))
do_table(symval, sym->st_size,
sizeof(struct pnp_device_id), "pnp",
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment