Commit a53d1f7c authored by Alexander Aring's avatar Alexander Aring Committed by David S. Miller

at86rf230: remove is212 and add driver data

This patch adds a new at86rf2xx_chip_data structure which holds device
specific attributes. Instead of runtime decisions "if (is212())" we set
callbacks/attributes while device detection.
Signed-off-by: default avatarAlexander Aring <alex.aring@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent c8ee0f56
......@@ -38,12 +38,19 @@
#include <net/mac802154.h>
#include <net/wpan-phy.h>
struct at86rf230_local;
/* at86rf2xx chip depend data.
* All timings are in us.
*/
struct at86rf2xx_chip_data {
int rssi_base_val;
int (*set_channel)(struct at86rf230_local *, int, int);
};
struct at86rf230_local {
struct spi_device *spi;
u8 part;
u8 vers;
u8 buf[2];
struct mutex bmux;
......@@ -56,16 +63,11 @@ struct at86rf230_local {
spinlock_t lock;
bool irq_busy;
bool is_tx;
bool tx_aret;
int rssi_base_val;
struct at86rf2xx_chip_data *data;
bool tx_aret;
};
static bool is_rf212(struct at86rf230_local *local)
{
return local->part == 7;
}
#define RG_TRX_STATUS (0x01)
#define SR_TRX_STATUS 0x01, 0x1f, 0
#define SR_RESERVED_01_3 0x01, 0x20, 5
......@@ -593,10 +595,8 @@ at86rf230_stop(struct ieee802154_dev *dev)
}
static int
at86rf230_set_channel(struct at86rf230_local *lp, int page, int channel)
at86rf23x_set_channel(struct at86rf230_local *lp, int page, int channel)
{
lp->rssi_base_val = -91;
return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
}
......@@ -614,10 +614,10 @@ at86rf212_set_channel(struct at86rf230_local *lp, int page, int channel)
if (page == 0) {
rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
lp->rssi_base_val = -100;
lp->data->rssi_base_val = -100;
} else {
rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
lp->rssi_base_val = -98;
lp->data->rssi_base_val = -98;
}
if (rc < 0)
return rc;
......@@ -639,10 +639,7 @@ at86rf230_channel(struct ieee802154_dev *dev, int page, int channel)
return -EINVAL;
}
if (is_rf212(lp))
rc = at86rf212_set_channel(lp, page, channel);
else
rc = at86rf230_set_channel(lp, page, channel);
rc = lp->data->set_channel(lp, page, channel);
if (rc < 0)
return rc;
......@@ -827,10 +824,10 @@ at86rf230_set_cca_ed_level(struct ieee802154_dev *dev, s32 level)
struct at86rf230_local *lp = dev->priv;
int desens_steps;
if (level < lp->rssi_base_val || level > 30)
if (level < lp->data->rssi_base_val || level > 30)
return -EINVAL;
desens_steps = (level - lp->rssi_base_val) * 100 / 207;
desens_steps = (level - lp->data->rssi_base_val) * 100 / 207;
return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, desens_steps);
}
......@@ -889,6 +886,21 @@ static struct ieee802154_ops at86rf230_ops = {
.set_frame_retries = at86rf230_set_frame_retries,
};
static struct at86rf2xx_chip_data at86rf233_data = {
.rssi_base_val = -91,
.set_channel = at86rf23x_set_channel,
};
static struct at86rf2xx_chip_data at86rf231_data = {
.rssi_base_val = -91,
.set_channel = at86rf23x_set_channel,
};
static struct at86rf2xx_chip_data at86rf212_data = {
.rssi_base_val = -100,
.set_channel = at86rf212_set_channel,
};
static void at86rf230_irqwork(struct work_struct *work)
{
struct at86rf230_local *lp =
......@@ -1061,8 +1073,6 @@ at86rf230_detect_device(struct at86rf230_local *lp)
return -EINVAL;
}
lp->part = part;
lp->vers = version;
lp->dev->extra_tx_headroom = 0;
lp->dev->flags = IEEE802154_HW_OMIT_CKSUM | IEEE802154_HW_AACK |
IEEE802154_HW_TXPOWER | IEEE802154_HW_CSMA;
......@@ -1074,11 +1084,13 @@ at86rf230_detect_device(struct at86rf230_local *lp)
break;
case 3:
chip = "at86rf231";
lp->data = &at86rf231_data;
lp->dev->phy->channels_supported[0] = 0x7FFF800;
break;
case 7:
chip = "at86rf212";
if (version == 1) {
lp->data = &at86rf212_data;
lp->dev->flags |= IEEE802154_HW_LBT;
lp->dev->phy->channels_supported[0] = 0x00007FF;
lp->dev->phy->channels_supported[2] = 0x00007FF;
......@@ -1088,6 +1100,7 @@ at86rf230_detect_device(struct at86rf230_local *lp)
break;
case 11:
chip = "at86rf233";
lp->data = &at86rf233_data;
lp->dev->phy->channels_supported[0] = 0x7FFF800;
break;
default:
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment