Commit a53febad authored by Dave Jones's avatar Dave Jones

Merge tetrachloride.(none):/mnt/raid/src/kernel/2.5/bk-linus

into tetrachloride.(none):/mnt/raid/src/kernel/2.5/cpufreq
parents 467d43e7 06bff99f
......@@ -147,7 +147,7 @@ MODULE_PARM(max_duration, "i");
#ifdef SUSPMOD_DEBUG
#define dprintk(msg...) printk(KERN_DEBUG "cpufreq:" msg)
#else
#define dprintk(msg...) do { } while(0);
#define dprintk(msg...) do { } while(0)
#endif
/**
......
......@@ -37,7 +37,7 @@
#ifdef DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0);
#define dprintk(msg...) do { } while(0)
#endif
static unsigned int numscales=16, numvscales;
......
......@@ -32,7 +32,7 @@
#ifdef DEBUG
#define dprintk(msg...) printk(msg)
#else
#define dprintk(msg...) do { } while(0);
#define dprintk(msg...) do { } while(0)
#endif
#define PFX "powernow: "
......@@ -89,7 +89,7 @@ static char have_a0;
rdmsr (msr, l__, h__); \
val = l__; \
val |= ((u64)h__<<32); \
} while(0);
} while(0)
#endif
#ifndef wrmsrl
......@@ -236,20 +236,24 @@ static void change_speed (unsigned int index)
if (have_a0 == 1) /* A0 errata 5 */
__asm__("\tcli\n");
rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
fidvidctl.bits.SGTC = latency; /* Stop grant timeout counter */
fidvidctl.bits.FID = fid;
fidvidctl.bits.FIDC = 1;
/* First change the frequency. */
if (fidvidctl.bits.FID != fid) {
rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
fidvidctl.bits.SGTC = latency; /* Stop grant timeout counter */
fidvidctl.bits.FID = fid;
fidvidctl.bits.FIDC = 1;
wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
}
/* Set the voltage lazily. Ie, only do voltage transition
if its changed since last time (Some speeds have the same voltage) */
/* Now change voltage. */
if (fidvidctl.bits.VID != vid) {
rdmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
fidvidctl.bits.VID = vid;
fidvidctl.bits.VIDC = 1;
wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
}
wrmsrl (MSR_K7_FID_VID_CTL, fidvidctl.val);
if (have_a0 == 1)
__asm__("\tsti\n");
......@@ -386,6 +390,10 @@ static struct cpufreq_driver powernow_driver = {
static int __init powernow_init (void)
{
if (dmi_broken & BROKEN_CPUFREQ) {
printk (KERN_INFO PFX "Disabled at boot time by DMI,\n");
return -ENODEV;
}
if (check_powernow()==0)
return -ENODEV;
return cpufreq_register_driver(&powernow_driver);
......
......@@ -511,6 +511,14 @@ static __init int exploding_pnp_bios(struct dmi_blacklist *d)
return 0;
}
static __init int acer_cpufreq_pst(struct dmi_blacklist *d)
{
printk(KERN_WARNING "%s laptop with broken PST tables in BIOS detected.\n", d->ident);
printk(KERN_WARNING "You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
printk(KERN_WARNING "cpufreq scaling has been disabled as a result of this.\n");
dmi_broken |= BROKEN_CPUFREQ;
return 0;
}
/*
......@@ -825,6 +833,17 @@ static __initdata struct dmi_blacklist dmi_blacklist[]={
NO_MATCH, NO_MATCH, NO_MATCH
} },
/*
* Some Athlon laptops have really fucked PST tables.
* A BIOS update is all that can save them.
* Mention this, and disable cpufreq.
*/
{ acer_cpufreq_pst, "Acer Aspire", {
MATCH(DMI_SYS_VENDOR, "Insyde Software"),
MATCH(DMI_BIOS_VERSION, "3A71"),
NO_MATCH, NO_MATCH, NO_MATCH
} },
{ NULL, }
};
......
......@@ -474,5 +474,6 @@ extern int is_sony_vaio_laptop;
#define BROKEN_ACPI_Sx 0x0001
#define BROKEN_INIT_AFTER_S1 0x0002
#define BROKEN_PNP_BIOS 0x0004
#define BROKEN_CPUFREQ 0x0008
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment