Commit a549952a authored by Jiri Pirko's avatar Jiri Pirko Committed by David S. Miller

bonding: introduce primary_reselect option

In some cases there is not desirable to switch back to primary interface when
it's link recovers and rather stay with currently active one. We need to avoid
packetloss as much as we can in some cases. This is solved by introducing
primary_reselect option. Note that enslaved primary slave is set as current
active no matter what.

Patch modified by Jay Vosburgh as follows: fixed bug in action
after change of option setting via sysfs, revised the documentation
update, and bumped the bonding version number.
Signed-off-by: default avatarJiri Pirko <jpirko@redhat.com>
Signed-off-by: default avatarJay Vosburgh <fubar@us.ibm.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 2d37a186
Linux Ethernet Bonding Driver HOWTO
Latest update: 12 November 2007
Latest update: 23 September 2009
Initial release : Thomas Davis <tadavis at lbl.gov>
Corrections, HA extensions : 2000/10/03-15 :
......@@ -614,6 +614,46 @@ primary
The primary option is only valid for active-backup mode.
primary_reselect
Specifies the reselection policy for the primary slave. This
affects how the primary slave is chosen to become the active slave
when failure of the active slave or recovery of the primary slave
occurs. This option is designed to prevent flip-flopping between
the primary slave and other slaves. Possible values are:
always or 0 (default)
The primary slave becomes the active slave whenever it
comes back up.
better or 1
The primary slave becomes the active slave when it comes
back up, if the speed and duplex of the primary slave is
better than the speed and duplex of the current active
slave.
failure or 2
The primary slave becomes the active slave only if the
current active slave fails and the primary slave is up.
The primary_reselect setting is ignored in two cases:
If no slaves are active, the first slave to recover is
made the active slave.
When initially enslaved, the primary slave is always made
the active slave.
Changing the primary_reselect policy via sysfs will cause an
immediate selection of the best active slave according to the new
policy. This may or may not result in a change of the active
slave, depending upon the circumstances.
This option was added for bonding version 3.6.0.
updelay
Specifies the time, in milliseconds, to wait before enabling a
......
......@@ -94,6 +94,7 @@ static int downdelay;
static int use_carrier = 1;
static char *mode;
static char *primary;
static char *primary_reselect;
static char *lacp_rate;
static char *ad_select;
static char *xmit_hash_policy;
......@@ -126,6 +127,14 @@ MODULE_PARM_DESC(mode, "Mode of operation : 0 for balance-rr, "
"6 for balance-alb");
module_param(primary, charp, 0);
MODULE_PARM_DESC(primary, "Primary network device to use");
module_param(primary_reselect, charp, 0);
MODULE_PARM_DESC(primary_reselect, "Reselect primary slave "
"once it comes up; "
"0 for always (default), "
"1 for only if speed of primary is "
"better, "
"2 for only on active slave "
"failure");
module_param(lacp_rate, charp, 0);
MODULE_PARM_DESC(lacp_rate, "LACPDU tx rate to request from 802.3ad partner "
"(slow/fast)");
......@@ -200,6 +209,13 @@ const struct bond_parm_tbl fail_over_mac_tbl[] = {
{ NULL, -1},
};
const struct bond_parm_tbl pri_reselect_tbl[] = {
{ "always", BOND_PRI_RESELECT_ALWAYS},
{ "better", BOND_PRI_RESELECT_BETTER},
{ "failure", BOND_PRI_RESELECT_FAILURE},
{ NULL, -1},
};
struct bond_parm_tbl ad_select_tbl[] = {
{ "stable", BOND_AD_STABLE},
{ "bandwidth", BOND_AD_BANDWIDTH},
......@@ -1070,6 +1086,25 @@ static void bond_do_fail_over_mac(struct bonding *bond,
}
static bool bond_should_change_active(struct bonding *bond)
{
struct slave *prim = bond->primary_slave;
struct slave *curr = bond->curr_active_slave;
if (!prim || !curr || curr->link != BOND_LINK_UP)
return true;
if (bond->force_primary) {
bond->force_primary = false;
return true;
}
if (bond->params.primary_reselect == BOND_PRI_RESELECT_BETTER &&
(prim->speed < curr->speed ||
(prim->speed == curr->speed && prim->duplex <= curr->duplex)))
return false;
if (bond->params.primary_reselect == BOND_PRI_RESELECT_FAILURE)
return false;
return true;
}
/**
* find_best_interface - select the best available slave to be the active one
......@@ -1094,7 +1129,8 @@ static struct slave *bond_find_best_slave(struct bonding *bond)
}
if ((bond->primary_slave) &&
bond->primary_slave->link == BOND_LINK_UP) {
bond->primary_slave->link == BOND_LINK_UP &&
bond_should_change_active(bond)) {
new_active = bond->primary_slave;
}
......@@ -1678,8 +1714,10 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
if (USES_PRIMARY(bond->params.mode) && bond->params.primary[0]) {
/* if there is a primary slave, remember it */
if (strcmp(bond->params.primary, new_slave->dev->name) == 0)
if (strcmp(bond->params.primary, new_slave->dev->name) == 0) {
bond->primary_slave = new_slave;
bond->force_primary = true;
}
}
write_lock_bh(&bond->curr_slave_lock);
......@@ -3201,11 +3239,14 @@ static void bond_info_show_master(struct seq_file *seq)
}
if (USES_PRIMARY(bond->params.mode)) {
seq_printf(seq, "Primary Slave: %s\n",
seq_printf(seq, "Primary Slave: %s",
(bond->primary_slave) ?
bond->primary_slave->dev->name : "None");
if (bond->primary_slave)
seq_printf(seq, " (primary_reselect %s)",
pri_reselect_tbl[bond->params.primary_reselect].modename);
seq_printf(seq, "Currently Active Slave: %s\n",
seq_printf(seq, "\nCurrently Active Slave: %s\n",
(curr) ? curr->dev->name : "None");
}
......@@ -4646,7 +4687,7 @@ int bond_parse_parm(const char *buf, const struct bond_parm_tbl *tbl)
static int bond_check_params(struct bond_params *params)
{
int arp_validate_value, fail_over_mac_value;
int arp_validate_value, fail_over_mac_value, primary_reselect_value;
/*
* Convert string parameters.
......@@ -4945,6 +4986,20 @@ static int bond_check_params(struct bond_params *params)
primary = NULL;
}
if (primary && primary_reselect) {
primary_reselect_value = bond_parse_parm(primary_reselect,
pri_reselect_tbl);
if (primary_reselect_value == -1) {
pr_err(DRV_NAME
": Error: Invalid primary_reselect \"%s\"\n",
primary_reselect ==
NULL ? "NULL" : primary_reselect);
return -EINVAL;
}
} else {
primary_reselect_value = BOND_PRI_RESELECT_ALWAYS;
}
if (fail_over_mac) {
fail_over_mac_value = bond_parse_parm(fail_over_mac,
fail_over_mac_tbl);
......@@ -4976,6 +5031,7 @@ static int bond_check_params(struct bond_params *params)
params->use_carrier = use_carrier;
params->lacp_fast = lacp_fast;
params->primary[0] = 0;
params->primary_reselect = primary_reselect_value;
params->fail_over_mac = fail_over_mac_value;
if (primary) {
......
......@@ -1212,6 +1212,58 @@ static ssize_t bonding_store_primary(struct device *d,
static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR,
bonding_show_primary, bonding_store_primary);
/*
* Show and set the primary_reselect flag.
*/
static ssize_t bonding_show_primary_reselect(struct device *d,
struct device_attribute *attr,
char *buf)
{
struct bonding *bond = to_bond(d);
return sprintf(buf, "%s %d\n",
pri_reselect_tbl[bond->params.primary_reselect].modename,
bond->params.primary_reselect);
}
static ssize_t bonding_store_primary_reselect(struct device *d,
struct device_attribute *attr,
const char *buf, size_t count)
{
int new_value, ret = count;
struct bonding *bond = to_bond(d);
if (!rtnl_trylock())
return restart_syscall();
new_value = bond_parse_parm(buf, pri_reselect_tbl);
if (new_value < 0) {
pr_err(DRV_NAME
": %s: Ignoring invalid primary_reselect value %.*s.\n",
bond->dev->name,
(int) strlen(buf) - 1, buf);
ret = -EINVAL;
goto out;
}
bond->params.primary_reselect = new_value;
pr_info(DRV_NAME ": %s: setting primary_reselect to %s (%d).\n",
bond->dev->name, pri_reselect_tbl[new_value].modename,
new_value);
read_lock(&bond->lock);
write_lock_bh(&bond->curr_slave_lock);
bond_select_active_slave(bond);
write_unlock_bh(&bond->curr_slave_lock);
read_unlock(&bond->lock);
out:
rtnl_unlock();
return ret;
}
static DEVICE_ATTR(primary_reselect, S_IRUGO | S_IWUSR,
bonding_show_primary_reselect,
bonding_store_primary_reselect);
/*
* Show and set the use_carrier flag.
*/
......@@ -1501,6 +1553,7 @@ static struct attribute *per_bond_attrs[] = {
&dev_attr_num_unsol_na.attr,
&dev_attr_miimon.attr,
&dev_attr_primary.attr,
&dev_attr_primary_reselect.attr,
&dev_attr_use_carrier.attr,
&dev_attr_active_slave.attr,
&dev_attr_mii_status.attr,
......
......@@ -23,8 +23,8 @@
#include "bond_3ad.h"
#include "bond_alb.h"
#define DRV_VERSION "3.5.0"
#define DRV_RELDATE "November 4, 2008"
#define DRV_VERSION "3.6.0"
#define DRV_RELDATE "September 26, 2009"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
......@@ -131,6 +131,7 @@ struct bond_params {
int lacp_fast;
int ad_select;
char primary[IFNAMSIZ];
int primary_reselect;
__be32 arp_targets[BOND_MAX_ARP_TARGETS];
};
......@@ -190,6 +191,7 @@ struct bonding {
struct slave *curr_active_slave;
struct slave *current_arp_slave;
struct slave *primary_slave;
bool force_primary;
s32 slave_cnt; /* never change this value outside the attach/detach wrappers */
rwlock_t lock;
rwlock_t curr_slave_lock;
......@@ -258,6 +260,10 @@ static inline bool bond_is_lb(const struct bonding *bond)
|| bond->params.mode == BOND_MODE_ALB;
}
#define BOND_PRI_RESELECT_ALWAYS 0
#define BOND_PRI_RESELECT_BETTER 1
#define BOND_PRI_RESELECT_FAILURE 2
#define BOND_FOM_NONE 0
#define BOND_FOM_ACTIVE 1
#define BOND_FOM_FOLLOW 2
......@@ -348,6 +354,7 @@ extern const struct bond_parm_tbl bond_mode_tbl[];
extern const struct bond_parm_tbl xmit_hashtype_tbl[];
extern const struct bond_parm_tbl arp_validate_tbl[];
extern const struct bond_parm_tbl fail_over_mac_tbl[];
extern const struct bond_parm_tbl pri_reselect_tbl[];
extern struct bond_parm_tbl ad_select_tbl[];
#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment