Merge tag 'timers-v5.4' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core

Pull clocksource/events updates from Daniel Lezcano:

 - Rewrite of the davinci timer resulting to an immutable branch to be
   shared with davinci platform specific tree (Bartosz Golaszewski)

 - Cleanup and improvements of the tegra timer (Dmitry Osipenko)

 - Add new nxp system counter timer (Bai Ping)

 - Increase priority for exynos_mct to take over the initialization
   of the IP the arch ARM timer depends on (Marek Szyprowski)

 - Change macro use _BITUL() by BIT() on arc timer (Masahiro Yamada)

 - Implement the delay timer on ixp4xx (Linus Walleij)

 - Add the SPDX license identifier on the meson timer (Neil Armstrong)

Documentation/devicetree/bindings/timer/nxp,sysctr-timer.txt

+NXP System Counter Module(sys_ctr)
+
+The system counter(sys_ctr) is a programmable system counter which provides
+a shared time base to Cortex A15, A7, A53, A73, etc. it is intended for use in
+applications where the counter is always powered and support multiple,
+unrelated clocks. The compare frame inside can be used for timer purpose.
+
+Required properties:
+
+- compatible :      should be "nxp,sysctr-timer"
+- reg :             Specifies the base physical address and size of the comapre
+                    frame and the counter control, read & compare.
+- interrupts :      should be the first compare frames' interrupt
+- clocks : 	    Specifies the counter clock.
+- clock-names: 	    Specifies the clock's name of this module
+
+Example:
+
+	system_counter: timer@306a0000 {
+		compatible = "nxp,sysctr-timer";
+		reg = <0x306a0000 0x20000>;/* system-counter-rd & compare */
+		clocks = <&clk_8m>;
+		clock-names = "per";
+		interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
+	};

arch/arm/include/asm/arch_timer.h

@@ -4,6 +4,7 @@
 
 #include <asm/barrier.h>
 #include <asm/errno.h>
+#include <asm/hwcap.h>
 #include <linux/clocksource.h>
 #include <linux/init.h>
 #include <linux/types.h>
@@ -124,6 +125,15 @@ static inline void arch_timer_set_cntkctl(u32 cntkctl)
 	isb();
 }
 
+static inline void arch_timer_set_evtstrm_feature(void)
+{
+	elf_hwcap |= HWCAP_EVTSTRM;
+}
+
+static inline bool arch_timer_have_evtstrm_feature(void)
+{
+	return elf_hwcap & HWCAP_EVTSTRM;
+}
 #endif
 
 #endif

arch/arm64/include/asm/arch_timer.h

@@ -20,6 +20,7 @@
 #define __ASM_ARCH_TIMER_H
 
 #include <asm/barrier.h>
+#include <asm/hwcap.h>
 #include <asm/sysreg.h>
 
 #include <linux/bug.h>
@@ -240,4 +241,16 @@ static inline int arch_timer_arch_init(void)
 	return 0;
 }
 
+static inline void arch_timer_set_evtstrm_feature(void)
+{
+	cpu_set_named_feature(EVTSTRM);
+#ifdef CONFIG_COMPAT
+	compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
+#endif
+}
+
+static inline bool arch_timer_have_evtstrm_feature(void)
+{
+	return cpu_have_named_feature(EVTSTRM);
+}
 #endif

drivers/clocksource/Kconfig

@@ -43,6 +43,11 @@ config BCM_KONA_TIMER
 	help
 	  Enables the support for the BCM Kona mobile timer driver.
 
+config DAVINCI_TIMER
+	bool "Texas Instruments DaVinci timer driver" if COMPILE_TEST
+	help
+	  Enables the support for the TI DaVinci timer driver.
+
 config DIGICOLOR_TIMER
 	bool "Digicolor timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
@@ -140,7 +145,7 @@ config TEGRA_TIMER
 	bool "Tegra timer driver" if COMPILE_TEST
 	select CLKSRC_MMIO
 	select TIMER_OF
-	depends on ARM || ARM64
+	depends on ARCH_TEGRA || COMPILE_TEST
 	help
 	  Enables support for the Tegra driver.
 
@@ -617,6 +622,13 @@ config CLKSRC_IMX_TPM
 	  Enable this option to use IMX Timer/PWM Module (TPM) timer as
 	  clocksource.
 
+config TIMER_IMX_SYS_CTR
+	bool "i.MX system counter timer" if COMPILE_TEST
+	select TIMER_OF
+	help
+	  Enable this option to use i.MX system counter timer as a
+	  clockevent.
+
 config CLKSRC_ST_LPC
 	bool "Low power clocksource found in the LPC" if COMPILE_TEST
 	select TIMER_OF if OF

drivers/clocksource/Makefile

@@ -15,6 +15,7 @@ obj-$(CONFIG_SH_TIMER_TMU)	+= sh_tmu.o
 obj-$(CONFIG_EM_TIMER_STI)	+= em_sti.o
 obj-$(CONFIG_CLKBLD_I8253)	+= i8253.o
 obj-$(CONFIG_CLKSRC_MMIO)	+= mmio.o
+obj-$(CONFIG_DAVINCI_TIMER)	+= timer-davinci.o
 obj-$(CONFIG_DIGICOLOR_TIMER)	+= timer-digicolor.o
 obj-$(CONFIG_OMAP_DM_TIMER)	+= timer-ti-dm.o
 obj-$(CONFIG_DW_APB_TIMER)	+= dw_apb_timer.o
@@ -36,7 +37,7 @@ obj-$(CONFIG_U300_TIMER)	+= timer-u300.o
 obj-$(CONFIG_SUN4I_TIMER)	+= timer-sun4i.o
 obj-$(CONFIG_SUN5I_HSTIMER)	+= timer-sun5i.o
 obj-$(CONFIG_MESON6_TIMER)	+= timer-meson6.o
-obj-$(CONFIG_TEGRA_TIMER)	+= timer-tegra20.o
+obj-$(CONFIG_TEGRA_TIMER)	+= timer-tegra.o
 obj-$(CONFIG_VT8500_TIMER)	+= timer-vt8500.o
 obj-$(CONFIG_NSPIRE_TIMER)	+= timer-zevio.o
 obj-$(CONFIG_BCM_KONA_TIMER)	+= bcm_kona_timer.o
@@ -74,6 +75,7 @@ obj-$(CONFIG_CLKSRC_MIPS_GIC)		+= mips-gic-timer.o
 obj-$(CONFIG_CLKSRC_TANGO_XTAL)		+= timer-tango-xtal.o
 obj-$(CONFIG_CLKSRC_IMX_GPT)		+= timer-imx-gpt.o
 obj-$(CONFIG_CLKSRC_IMX_TPM)		+= timer-imx-tpm.o
+obj-$(CONFIG_TIMER_IMX_SYS_CTR)		+= timer-imx-sysctr.o
 obj-$(CONFIG_ASM9260_TIMER)		+= asm9260_timer.o
 obj-$(CONFIG_H8300_TMR8)		+= h8300_timer8.o
 obj-$(CONFIG_H8300_TMR16)		+= h8300_timer16.o

drivers/clocksource/arc_timer.c

@@ -16,6 +16,7 @@
  */
 
 #include <linux/interrupt.h>
+#include <linux/bits.h>
 #include <linux/clk.h>
 #include <linux/clk-provider.h>
 #include <linux/clocksource.h>
@@ -142,7 +143,7 @@ static u64 arc_read_rtc(struct clocksource *cs)
 		l = read_aux_reg(AUX_RTC_LOW);
 		h = read_aux_reg(AUX_RTC_HIGH);
 		status = read_aux_reg(AUX_RTC_CTRL);
-	} while (!(status & _BITUL(31)));
+	} while (!(status & BIT(31)));
 
 	return (((u64)h) << 32) | l;
 }

drivers/clocksource/arm_arch_timer.c

@@ -804,14 +804,7 @@ static void arch_timer_evtstrm_enable(int divider)
 	cntkctl |= (divider << ARCH_TIMER_EVT_TRIGGER_SHIFT)
 			| ARCH_TIMER_VIRT_EVT_EN;
 	arch_timer_set_cntkctl(cntkctl);
-#ifdef CONFIG_ARM64
-	cpu_set_named_feature(EVTSTRM);
-#else
-	elf_hwcap |= HWCAP_EVTSTRM;
-#endif
-#ifdef CONFIG_COMPAT
-	compat_elf_hwcap |= COMPAT_HWCAP_EVTSTRM;
-#endif
+	arch_timer_set_evtstrm_feature();
 	cpumask_set_cpu(smp_processor_id(), &evtstrm_available);
 }
 
@@ -1040,11 +1033,7 @@ static int arch_timer_cpu_pm_notify(struct notifier_block *self,
 	} else if (action == CPU_PM_ENTER_FAILED || action == CPU_PM_EXIT) {
 		arch_timer_set_cntkctl(__this_cpu_read(saved_cntkctl));
 
-#ifdef CONFIG_ARM64
-		if (cpu_have_named_feature(EVTSTRM))
-#else
-		if (elf_hwcap & HWCAP_EVTSTRM)
-#endif
+		if (arch_timer_have_evtstrm_feature())
 			cpumask_set_cpu(smp_processor_id(), &evtstrm_available);
 	}
 	return NOTIFY_OK;

drivers/clocksource/exynos_mct.c

@@ -209,7 +209,7 @@ static void exynos4_frc_resume(struct clocksource *cs)
 
 static struct clocksource mct_frc = {
 	.name		= "mct-frc",
-	.rating		= 400,
+	.rating		= 450,	/* use value higher than ARM arch timer */
 	.read		= exynos4_frc_read,
 	.mask		= CLOCKSOURCE_MASK(32),
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
@@ -464,7 +464,7 @@ static int exynos4_mct_starting_cpu(unsigned int cpu)
 	evt->set_state_oneshot_stopped = set_state_shutdown;
 	evt->tick_resume = set_state_shutdown;
 	evt->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT;
-	evt->rating = 450;
+	evt->rating = 500;	/* use value higher than ARM arch timer */
 
 	exynos4_mct_write(TICK_BASE_CNT, mevt->base + MCT_L_TCNTB_OFFSET);
 

drivers/clocksource/timer-imx-sysctr.c

+// SPDX-License-Identifier: GPL-2.0+
+//
+// Copyright 2017-2019 NXP
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+#include "timer-of.h"
+
+#define CMP_OFFSET	0x10000
+
+#define CNTCV_LO	0x8
+#define CNTCV_HI	0xc
+#define CMPCV_LO	(CMP_OFFSET + 0x20)
+#define CMPCV_HI	(CMP_OFFSET + 0x24)
+#define CMPCR		(CMP_OFFSET + 0x2c)
+
+#define SYS_CTR_EN		0x1
+#define SYS_CTR_IRQ_MASK	0x2
+
+static void __iomem *sys_ctr_base;
+static u32 cmpcr;
+
+static void sysctr_timer_enable(bool enable)
+{
+	writel(enable ? cmpcr | SYS_CTR_EN : cmpcr, sys_ctr_base + CMPCR);
+}
+
+static void sysctr_irq_acknowledge(void)
+{
+	/*
+	 * clear the enable bit(EN =0) will clear
+	 * the status bit(ISTAT = 0), then the interrupt
+	 * signal will be negated(acknowledged).
+	 */
+	sysctr_timer_enable(false);
+}
+
+static inline u64 sysctr_read_counter(void)
+{
+	u32 cnt_hi, tmp_hi, cnt_lo;
+
+	do {
+		cnt_hi = readl_relaxed(sys_ctr_base + CNTCV_HI);
+		cnt_lo = readl_relaxed(sys_ctr_base + CNTCV_LO);
+		tmp_hi = readl_relaxed(sys_ctr_base + CNTCV_HI);
+	} while (tmp_hi != cnt_hi);
+
+	return  ((u64) cnt_hi << 32) | cnt_lo;
+}
+
+static int sysctr_set_next_event(unsigned long delta,
+				 struct clock_event_device *evt)
+{
+	u32 cmp_hi, cmp_lo;
+	u64 next;
+
+	sysctr_timer_enable(false);
+
+	next = sysctr_read_counter();
+
+	next += delta;
+
+	cmp_hi = (next >> 32) & 0x00fffff;
+	cmp_lo = next & 0xffffffff;
+
+	writel_relaxed(cmp_hi, sys_ctr_base + CMPCV_HI);
+	writel_relaxed(cmp_lo, sys_ctr_base + CMPCV_LO);
+
+	sysctr_timer_enable(true);
+
+	return 0;
+}
+
+static int sysctr_set_state_oneshot(struct clock_event_device *evt)
+{
+	return 0;
+}
+
+static int sysctr_set_state_shutdown(struct clock_event_device *evt)
+{
+	sysctr_timer_enable(false);
+
+	return 0;
+}
+
+static irqreturn_t sysctr_timer_interrupt(int irq, void *dev_id)
+{
+	struct clock_event_device *evt = dev_id;
+
+	sysctr_irq_acknowledge();
+
+	evt->event_handler(evt);
+
+	return IRQ_HANDLED;
+}
+
+static struct timer_of to_sysctr = {
+	.flags = TIMER_OF_IRQ | TIMER_OF_CLOCK | TIMER_OF_BASE,
+	.clkevt = {
+		.name			= "i.MX system counter timer",
+		.features		= CLOCK_EVT_FEAT_ONESHOT |
+						CLOCK_EVT_FEAT_DYNIRQ,
+		.set_state_oneshot	= sysctr_set_state_oneshot,
+		.set_next_event		= sysctr_set_next_event,
+		.set_state_shutdown	= sysctr_set_state_shutdown,
+		.rating			= 200,
+	},
+	.of_irq = {
+		.handler		= sysctr_timer_interrupt,
+		.flags			= IRQF_TIMER | IRQF_IRQPOLL,
+	},
+	.of_clk = {
+		.name = "per",
+	},
+};
+
+static void __init sysctr_clockevent_init(void)
+{
+	to_sysctr.clkevt.cpumask = cpumask_of(0);
+
+	clockevents_config_and_register(&to_sysctr.clkevt,
+					timer_of_rate(&to_sysctr),
+					0xff, 0x7fffffff);
+}
+
+static int __init sysctr_timer_init(struct device_node *np)
+{
+	int ret = 0;
+
+	ret = timer_of_init(np, &to_sysctr);
+	if (ret)
+		return ret;
+
+	sys_ctr_base = timer_of_base(&to_sysctr);
+	cmpcr = readl(sys_ctr_base + CMPCR);
+	cmpcr &= ~SYS_CTR_EN;
+
+	sysctr_clockevent_init();
+
+	return 0;
+}
+TIMER_OF_DECLARE(sysctr_timer, "nxp,sysctr-timer", sysctr_timer_init);

drivers/clocksource/timer-ixp4xx.c

@@ -75,14 +75,19 @@ to_ixp4xx_timer(struct clock_event_device *evt)
 	return container_of(evt, struct ixp4xx_timer, clkevt);
 }
 
-static u64 notrace ixp4xx_read_sched_clock(void)
+static unsigned long ixp4xx_read_timer(void)
 {
 	return __raw_readl(local_ixp4xx_timer->base + IXP4XX_OSTS_OFFSET);
 }
 
+static u64 notrace ixp4xx_read_sched_clock(void)
+{
+	return ixp4xx_read_timer();
+}
+
 static u64 ixp4xx_clocksource_read(struct clocksource *c)
 {
-	return __raw_readl(local_ixp4xx_timer->base + IXP4XX_OSTS_OFFSET);
+	return ixp4xx_read_timer();
 }
 
 static irqreturn_t ixp4xx_timer_interrupt(int irq, void *dev_id)
@@ -224,6 +229,13 @@ static __init int ixp4xx_timer_register(void __iomem *base,
 
 	sched_clock_register(ixp4xx_read_sched_clock, 32, timer_freq);
 
+#ifdef CONFIG_ARM
+	/* Also use this timer for delays */
+	tmr->delay_timer.read_current_timer = ixp4xx_read_timer;
+	tmr->delay_timer.freq = timer_freq;
+	register_current_timer_delay(&tmr->delay_timer);
+#endif
+
 	return 0;
 }
 

drivers/clocksource/timer-meson6.c

+// SPDX-License-Identifier: GPL-2.0
 /*
  * Amlogic Meson6 SoCs timer handling.
  *
  * Copyright (C) 2014 Carlo Caione <carlo@caione.org>
  *
  * Based on code from Amlogic, Inc
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
  */
 
 #include <linux/bitfield.h>

include/clocksource/timer-davinci.h

+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * TI DaVinci clocksource driver
+ *
+ * Copyright (C) 2019 Texas Instruments
+ * Author: Bartosz Golaszewski <bgolaszewski@baylibre.com>
+ */
+
+#ifndef __TIMER_DAVINCI_H__
+#define __TIMER_DAVINCI_H__
+
+#include <linux/clk.h>
+#include <linux/ioport.h>
+
+enum {
+	DAVINCI_TIMER_CLOCKEVENT_IRQ,
+	DAVINCI_TIMER_CLOCKSOURCE_IRQ,
+	DAVINCI_TIMER_NUM_IRQS,
+};
+
+/**
+ * struct davinci_timer_cfg - davinci clocksource driver configuration struct
+ * @reg:        register range resource
+ * @irq:        clockevent and clocksource interrupt resources
+ * @cmp_off:    if set - it specifies the compare register used for clockevent
+ *
+ * Note: if the compare register is specified, the driver will use the bottom
+ * clock half for both clocksource and clockevent and the compare register
+ * to generate event irqs. The user must supply the correct compare register
+ * interrupt number.
+ *
+ * This is only used by da830 the DSP of which uses the top half. The timer
+ * driver still configures the top half to run in free-run mode.
+ */
+struct davinci_timer_cfg {
+	struct resource reg;
+	struct resource irq[DAVINCI_TIMER_NUM_IRQS];
+	unsigned int cmp_off;
+};
+
+int __init davinci_timer_register(struct clk *clk,
+				  const struct davinci_timer_cfg *data);
+
+#endif /* __TIMER_DAVINCI_H__ */

include/linux/cpuhotplug.h

@@ -116,10 +116,10 @@ enum cpuhp_state {
 	CPUHP_AP_PERF_ARM_ACPI_STARTING,
 	CPUHP_AP_PERF_ARM_STARTING,
 	CPUHP_AP_ARM_L2X0_STARTING,
+	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_ARCH_TIMER_STARTING,
 	CPUHP_AP_ARM_GLOBAL_TIMER_STARTING,
 	CPUHP_AP_JCORE_TIMER_STARTING,
-	CPUHP_AP_EXYNOS4_MCT_TIMER_STARTING,
 	CPUHP_AP_ARM_TWD_STARTING,
 	CPUHP_AP_QCOM_TIMER_STARTING,
 	CPUHP_AP_TEGRA_TIMER_STARTING,