[MIPS] Unify memset.S

The 32-bit version and 64-bit version are almost equal.  Unify them.
This makes further improvements (for example, supporting CDEX, etc.)
easier.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/lib-32/Makefile

@@ -2,7 +2,7 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= memset.o watch.o
+lib-y	+= watch.o
 
 obj-$(CONFIG_CPU_MIPS32)	+= dump_tlb.o
 obj-$(CONFIG_CPU_MIPS64)	+= dump_tlb.o

arch/mips/lib-64/Makefile

@@ -2,7 +2,7 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= memset.o watch.o
+lib-y	+= watch.o
 
 obj-$(CONFIG_CPU_MIPS32)	+= dump_tlb.o
 obj-$(CONFIG_CPU_MIPS64)	+= dump_tlb.o

arch/mips/lib-64/memset.S

-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 1999, 2000 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
-#define EX(insn,reg,addr,handler)			\
-9:	insn	reg, addr;				\
-	.section __ex_table,"a"; 			\
-	PTR	9b, handler; 				\
-	.previous
-
-	.macro	f_fill64 dst, offset, val, fixup
-	EX(LONG_S, \val, (\offset +  0 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  1 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  2 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  3 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  4 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  5 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  6 * LONGSIZE)(\dst), \fixup)
-	EX(LONG_S, \val, (\offset +  7 * LONGSIZE)(\dst), \fixup)
-	.endm
-
-/*
- * memset(void *s, int c, size_t n)
- *
- * a0: start of area to clear
- * a1: char to fill with
- * a2: size of area to clear
- */
-	.set	noreorder
-	.align	5
-LEAF(memset)
-	beqz		a1, 1f
-	 move		v0, a0			/* result */
-
-	andi		a1, 0xff		/* spread fillword */
-	dsll		t1, a1, 8
-	or		a1, t1
-	dsll		t1, a1, 16
-	or		a1, t1
-	dsll		t1, a1, 32
-	or		a1, t1
-1:
-
-FEXPORT(__bzero)
-	sltiu		t0, a2, LONGSIZE	/* very small region? */
-	bnez		t0, small_memset
-	 andi		t0, a0, LONGMASK	/* aligned? */
-
-	beqz		t0, 1f
-	 PTR_SUBU	t0, LONGSIZE		/* alignment in bytes */
-
-#ifdef __MIPSEB__
-	EX(sdl, a1, (a0), first_fixup)		/* make dword aligned */
-#endif
-#ifdef __MIPSEL__
-	EX(sdr, a1, (a0), first_fixup)		/* make dword aligned */
-#endif
-	PTR_SUBU	a0, t0			/* long align ptr */
-	PTR_ADDU	a2, t0			/* correct size */
-
-1:	ori		t1, a2, 0x3f		/* # of full blocks */
-	xori		t1, 0x3f
-	beqz		t1, memset_partial	/* no block to fill */
-	 andi		t0, a2, 0x38
-
-	PTR_ADDU	t1, a0			/* end address */
-	.set		reorder
-1:	PTR_ADDIU	a0, 64
-	f_fill64 a0, -64, a1, fwd_fixup
-	bne		t1, a0, 1b
-	.set		noreorder
-
-memset_partial:
-	PTR_LA		t1, 2f			/* where to start */
-	.set		noat
-	dsrl		AT, t0, 1
-	PTR_SUBU	t1, AT
-	.set		noat
-	jr		t1
-	 PTR_ADDU	a0, t0			/* dest ptr */
-
-	.set		push
-	.set		noreorder
-	.set		nomacro
-	f_fill64 a0, -64, a1, partial_fixup	/* ... but first do longs ... */
-2:	.set		pop
-	andi		a2, LONGMASK		/* At most one long to go */
-
-	beqz		a2, 1f
-	 PTR_ADDU	a0, a2			/* What's left */
-#ifdef __MIPSEB__
-	EX(sdr, a1, -1(a0), last_fixup)
-#endif
-#ifdef __MIPSEL__
-	EX(sdl, a1, -1(a0), last_fixup)
-#endif
-1:	jr		ra
-	 move		a2, zero
-
-small_memset:
-	beqz		a2, 2f
-	 PTR_ADDU	t1, a0, a2
-
-1:	PTR_ADDIU	a0, 1			/* fill bytewise */
-	bne		t1, a0, 1b
-	 sb		a1, -1(a0)
-
-2:	jr		ra			/* done */
-	 move		a2, zero
-	END(memset)
-
-first_fixup:
-	jr	ra
-	 nop
-
-fwd_fixup:
-	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
-	andi		a2, 0x3f
-	LONG_ADDU	a2, t1
-	jr		ra
-	 LONG_SUBU	a2, t0
-
-partial_fixup:
-	PTR_L		t0, TI_TASK($28)
-	LONG_L		t0, THREAD_BUADDR(t0)
-	andi		a2, LONGMASK
-	LONG_ADDU	a2, t1
-	jr		ra
-	 LONG_SUBU	a2, t0
-
-last_fixup:
-	jr		ra
-	 andi		v1, a2, LONGMASK

arch/mips/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for MIPS-specific library files..
 #
 
-lib-y	+= csum_partial.o memcpy.o promlib.o \
+lib-y	+= csum_partial.o memcpy.o memset.o promlib.o \
 	   strlen_user.o strncpy_user.o strnlen_user.o uncached.o
 
 obj-y	+= iomap.o

arch/mips/lib-32/memset.S → arch/mips/lib/memset.S

@@ -10,6 +10,14 @@
 #include <asm/asm-offsets.h>
 #include <asm/regdef.h>
 
+#if LONGSIZE == 4
+#define LONG_S_L swl
+#define LONG_S_R swr
+#else
+#define LONG_S_L sdl
+#define LONG_S_R sdr
+#endif
+
 #define EX(insn,reg,addr,handler)			\
 9:	insn	reg, addr;				\
 	.section __ex_table,"a"; 			\
@@ -25,6 +33,7 @@
 	EX(LONG_S, \val, (\offset +  5 * LONGSIZE)(\dst), \fixup)
 	EX(LONG_S, \val, (\offset +  6 * LONGSIZE)(\dst), \fixup)
 	EX(LONG_S, \val, (\offset +  7 * LONGSIZE)(\dst), \fixup)
+#if LONGSIZE == 4
 	EX(LONG_S, \val, (\offset +  8 * LONGSIZE)(\dst), \fixup)
 	EX(LONG_S, \val, (\offset +  9 * LONGSIZE)(\dst), \fixup)
 	EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup)
@@ -33,6 +42,7 @@
 	EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup)
 	EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup)
 	EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup)
+#endif
 	.endm
 
 /*
@@ -49,9 +59,13 @@ LEAF(memset)
 	 move		v0, a0			/* result */
 
 	andi		a1, 0xff		/* spread fillword */
-	sll		t1, a1, 8
+	LONG_SLL		t1, a1, 8
 	or		a1, t1
-	sll		t1, a1, 16
+	LONG_SLL		t1, a1, 16
+#if LONGSIZE == 8
+	or		a1, t1
+	LONG_SLL		t1, a1, 32
+#endif
 	or		a1, t1
 1:
 
@@ -64,10 +78,10 @@ FEXPORT(__bzero)
 	 PTR_SUBU	t0, LONGSIZE		/* alignment in bytes */
 
 #ifdef __MIPSEB__
-	EX(swl, a1, (a0), first_fixup)		/* make word aligned */
+	EX(LONG_S_L, a1, (a0), first_fixup)	/* make word/dword aligned */
 #endif
 #ifdef __MIPSEL__
-	EX(swr, a1, (a0), first_fixup)		/* make word aligned */
+	EX(LONG_S_R, a1, (a0), first_fixup)	/* make word/dword aligned */
 #endif
 	PTR_SUBU	a0, t0			/* long align ptr */
 	PTR_ADDU	a2, t0			/* correct size */
@@ -75,7 +89,7 @@ FEXPORT(__bzero)
 1:	ori		t1, a2, 0x3f		/* # of full blocks */
 	xori		t1, 0x3f
 	beqz		t1, memset_partial	/* no block to fill */
-	 andi		t0, a2, 0x3c
+	 andi		t0, a2, 0x40-LONGSIZE
 
 	PTR_ADDU	t1, a0			/* end address */
 	.set		reorder
@@ -86,7 +100,14 @@ FEXPORT(__bzero)
 
 memset_partial:
 	PTR_LA		t1, 2f			/* where to start */
+#if LONGSIZE == 4
 	PTR_SUBU	t1, t0
+#else
+	.set		noat
+	LONG_SRL		AT, t0, 1
+	PTR_SUBU	t1, AT
+	.set		noat
+#endif
 	jr		t1
 	 PTR_ADDU	a0, t0			/* dest ptr */
 
@@ -100,10 +121,10 @@ memset_partial:
 	beqz		a2, 1f
 	 PTR_ADDU	a0, a2			/* What's left */
 #ifdef __MIPSEB__
-	EX(swr, a1, -1(a0), last_fixup)
+	EX(LONG_S_R, a1, -1(a0), last_fixup)
 #endif
 #ifdef __MIPSEL__
-	EX(swl, a1, -1(a0), last_fixup)
+	EX(LONG_S_L, a1, -1(a0), last_fixup)
 #endif
 1:	jr		ra
 	 move		a2, zero