Commit a5e27015 authored by Andreas Färber's avatar Andreas Färber Committed by Kevin Hilman

arm64: dts: meson-gxm-nexbox-a1: Fix node order

Sort nodes referenced by label alphabetically.
Signed-off-by: default avatarAndreas Färber <afaerber@suse.de>
Signed-off-by: default avatarKevin Hilman <khilman@baylibre.com>
parent e02849b9
......@@ -113,10 +113,49 @@ hdmi_connector_in: endpoint {
};
};
&uart_AO {
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
&ethmac {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
&ir {
......@@ -163,47 +202,8 @@ &sd_emmc_c {
vqmmc-supply = <&vddio_boot>;
};
&ethmac {
status = "okay";
pinctrl-0 = <&eth_pins>;
pinctrl-names = "default";
/* Select external PHY by default */
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
snps,reset-gpio = <&gpio GPIOZ_14 0>;
snps,reset-delays-us = <0 10000 1000000>;
snps,reset-active-low;
/* External PHY is in RGMII */
phy-mode = "rgmii";
};
&external_mdio {
external_phy: ethernet-phy@0 {
compatible = "ethernet-phy-id001c.c916", "ethernet-phy-ieee802.3-c22";
reg = <0>;
max-speed = <1000>;
};
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
&hdmi_tx {
&uart_AO {
status = "okay";
pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>;
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment