Commit a5e9a69e authored by Paul Burton's avatar Paul Burton Committed by Ralf Baechle

MIPS: Detect the MSA ASE

This patch adds support for probing the MSAP bit within the Config3
register in order to detect the presence of the MSA ASE. Presence of the
ASE will be indicated in /proc/cpuinfo. The value of the MSA
implementation register will be displayed at boot to aid debugging and
verification of a correct setup, as is done for the FPU.
Signed-off-by: default avatarPaul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6430/Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent 7f65afb9
......@@ -1208,6 +1208,7 @@ config CPU_MIPS32_R2
select CPU_HAS_PREFETCH
select CPU_SUPPORTS_32BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_MSA
select HAVE_KVM
help
Choose this option to build a kernel for release 2 or later of the
......@@ -1243,6 +1244,7 @@ config CPU_MIPS64_R2
select CPU_SUPPORTS_64BIT_KERNEL
select CPU_SUPPORTS_HIGHMEM
select CPU_SUPPORTS_HUGEPAGES
select CPU_SUPPORTS_MSA
help
Choose this option to build a kernel for release 2 or later of the
MIPS64 architecture. Many modern embedded systems with a 64-bit
......@@ -2081,6 +2083,20 @@ config CPU_MICROMIPS
When this option is enabled the kernel will be built using the
microMIPS ISA
config CPU_HAS_MSA
bool "Support for the MIPS SIMD Architecture"
depends on CPU_SUPPORTS_MSA
default y
help
MIPS SIMD Architecture (MSA) introduces 128 bit wide vector registers
and a set of SIMD instructions to operate on them. When this option
is enabled the kernel will support detection of the MSA ASE. If you
know that your kernel will only be running on CPUs which do not
support MSA then you may wish to say N here to reduce the size of
your kernel.
If unsure, say Y.
config CPU_HAS_WB
bool
......@@ -2146,6 +2162,9 @@ config SYS_SUPPORTS_SMARTMIPS
config SYS_SUPPORTS_MICROMIPS
bool
config CPU_SUPPORTS_MSA
bool
config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA && !CPU_LOONGSON2
......
......@@ -299,4 +299,10 @@
#define cpu_has_vz (cpu_data[0].ases & MIPS_ASE_VZ)
#endif
#if defined(CONFIG_CPU_HAS_MSA) && !defined(cpu_has_msa)
# define cpu_has_msa (cpu_data[0].ases & MIPS_ASE_MSA)
#elif !defined(cpu_has_msa)
# define cpu_has_msa 0
#endif
#endif /* __ASM_CPU_FEATURES_H */
......@@ -49,6 +49,7 @@ struct cpuinfo_mips {
unsigned long ases;
unsigned int processor_id;
unsigned int fpu_id;
unsigned int msa_id;
unsigned int cputype;
int isa_level;
int tlbsize;
......
......@@ -370,5 +370,6 @@ enum cpu_type_enum {
#define MIPS_ASE_MIPSMT 0x00000020 /* CPU supports MIPS MT */
#define MIPS_ASE_DSP2P 0x00000040 /* Signal Processing ASE Rev 2 */
#define MIPS_ASE_VZ 0x00000080 /* Virtualization ASE */
#define MIPS_ASE_MSA 0x00000100 /* MIPS SIMD Architecture */
#endif /* _ASM_CPU_H */
......@@ -23,6 +23,7 @@
#include <asm/cpu-type.h>
#include <asm/fpu.h>
#include <asm/mipsregs.h>
#include <asm/msa.h>
#include <asm/watch.h>
#include <asm/elf.h>
#include <asm/spram.h>
......@@ -126,6 +127,20 @@ static inline int __cpu_has_fpu(void)
return ((cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE);
}
static inline unsigned long cpu_get_msa_id(void)
{
unsigned long status, conf5, msa_id;
status = read_c0_status();
__enable_fpu(FPU_64BIT);
conf5 = read_c0_config5();
enable_msa();
msa_id = read_msa_ir();
write_c0_config5(conf5);
write_c0_status(status);
return msa_id;
}
static inline void cpu_probe_vmbits(struct cpuinfo_mips *c)
{
#ifdef __NEED_VMBITS_PROBE
......@@ -301,6 +316,8 @@ static inline unsigned int decode_config3(struct cpuinfo_mips *c)
c->ases |= MIPS_ASE_VZ;
if (config3 & MIPS_CONF3_SC)
c->options |= MIPS_CPU_SEGMENTS;
if (config3 & MIPS_CONF3_MSA)
c->ases |= MIPS_ASE_MSA;
return config3 & MIPS_CONF_M;
}
......@@ -1178,6 +1195,9 @@ void cpu_probe(void)
else
c->srsets = 1;
if (cpu_has_msa)
c->msa_id = cpu_get_msa_id();
cpu_probe_vmbits(c);
#ifdef CONFIG_64BIT
......@@ -1194,4 +1214,6 @@ void cpu_report(void)
smp_processor_id(), c->processor_id, cpu_name_string());
if (c->options & MIPS_CPU_FPU)
printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
if (cpu_has_msa)
pr_info("MSA revision is: %08x\n", c->msa_id);
}
......@@ -95,6 +95,7 @@ static int show_cpuinfo(struct seq_file *m, void *v)
if (cpu_has_mipsmt) seq_printf(m, "%s", " mt");
if (cpu_has_mmips) seq_printf(m, "%s", " micromips");
if (cpu_has_vz) seq_printf(m, "%s", " vz");
if (cpu_has_msa) seq_printf(m, "%s", " msa");
seq_printf(m, "\n");
if (cpu_has_mmips) {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment