Commit a618a734 authored by Olof Johansson's avatar Olof Johansson

Merge tag 'reset-for-4.12-1' of git://git.pengutronix.de/git/pza/linux into next/drivers

Reset controller changes for v4.12

- make reset drivers with bool Kconfig options explicitly non-modular
- fix uniphier non-static symbol warnings
- fix socfpga nr_resets property
- new drivers for the Arria10 and i.MX7 system reset controllers
- fix sunxi 64-bit compilation

* tag 'reset-for-4.12-1' of git://git.pengutronix.de/git/pza/linux:
  reset: sunxi: fix for 64-bit compilation
  reset: Add Altera Arria10 SR Reset Controller
  dt-bindings: reset: a10sr: Add Arria10 SR Reset Controller offsets
  reset: Add i.MX7 SRC reset driver
  reset-socfpga: Fix nr_resets property
  reset: uniphier: fix non static symbol warnings
  reset: pistachio: make it explicitly non-modular
  reset: ath79: make it explicitly non-modular
  reset: oxnas: make it explicitly non-modular
  reset: meson: make it explicitly non-modular
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parents 4495c08e 11282a49
Freescale i.MX7 System Reset Controller
======================================
Please also refer to reset.txt in this directory for common reset
controller binding usage.
Required properties:
- compatible: Should be "fsl,imx7-src", "syscon"
- reg: should be register base and length as documented in the
datasheet
- interrupts: Should contain SRC interrupt
- #reset-cells: 1, see below
example:
src: reset-controller@30390000 {
compatible = "fsl,imx7d-src", "syscon";
reg = <0x30390000 0x2000>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
#reset-cells = <1>;
};
Specifying reset lines connected to IP modules
==============================================
The system reset controller can be used to reset various set of
peripherals. Device nodes that need access to reset lines should
specify them as a reset phandle in their corresponding node as
specified in reset.txt.
Example:
pcie: pcie@33800000 {
...
resets = <&src IMX7_RESET_PCIEPHY>,
<&src IMX7_RESET_PCIE_CTRL_APPS_EN>;
reset-names = "pciephy", "apps";
...
};
For list of all valid reset indicies see
<dt-bindings/reset/imx7-reset.h>
......@@ -653,7 +653,9 @@ M: Thor Thayer <thor.thayer@linux.intel.com>
S: Maintained
F: drivers/gpio/gpio-altera-a10sr.c
F: drivers/mfd/altera-a10sr.c
F: drivers/reset/reset-a10sr.c
F: include/linux/mfd/altera-a10sr.h
F: include/dt-bindings/reset/altr,rst-mgr-a10sr.h
ALTERA TRIPLE SPEED ETHERNET DRIVER
M: Vince Bridgers <vbridger@opensource.altera.com>
......
......@@ -14,6 +14,13 @@ menuconfig RESET_CONTROLLER
if RESET_CONTROLLER
config RESET_A10SR
tristate "Altera Arria10 System Resource Reset"
depends on MFD_ALTERA_A10SR
help
This option enables support for the external reset functions for
peripheral PHYs on the Altera Arria10 System Resource Chip.
config RESET_ATH79
bool "AR71xx Reset Driver" if COMPILE_TEST
default ATH79
......@@ -27,6 +34,13 @@ config RESET_BERLIN
help
This enables the reset controller driver for Marvell Berlin SoCs.
config RESET_IMX7
bool "i.MX7 Reset Driver" if COMPILE_TEST
default SOC_IMX7D
select MFD_SYSCON
help
This enables the reset controller driver for i.MX7 SoCs.
config RESET_LPC18XX
bool "LPC18xx/43xx Reset Driver" if COMPILE_TEST
default ARCH_LPC18XX
......
......@@ -2,8 +2,10 @@ obj-y += core.o
obj-y += hisilicon/
obj-$(CONFIG_ARCH_STI) += sti/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o
obj-$(CONFIG_RESET_ATH79) += reset-ath79.o
obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o
obj-$(CONFIG_RESET_IMX7) += reset-imx7.o
obj-$(CONFIG_RESET_LPC18XX) += reset-lpc18xx.o
obj-$(CONFIG_RESET_MESON) += reset-meson.o
obj-$(CONFIG_RESET_OXNAS) += reset-oxnas.o
......@@ -15,3 +17,4 @@ obj-$(CONFIG_TI_SYSCON_RESET) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_ZX2967) += reset-zx2967.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
/*
* Copyright Intel Corporation (C) 2017. All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*
* Reset driver for Altera Arria10 MAX5 System Resource Chip
*
* Adapted from reset-socfpga.c
*/
#include <linux/err.h>
#include <linux/mfd/altera-a10sr.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <dt-bindings/reset/altr,rst-mgr-a10sr.h>
struct a10sr_reset {
struct reset_controller_dev rcdev;
struct regmap *regmap;
};
static inline struct a10sr_reset *to_a10sr_rst(struct reset_controller_dev *rc)
{
return container_of(rc, struct a10sr_reset, rcdev);
}
static inline int a10sr_reset_shift(unsigned long id)
{
switch (id) {
case A10SR_RESET_ENET_HPS:
return 1;
case A10SR_RESET_PCIE:
case A10SR_RESET_FILE:
case A10SR_RESET_BQSPI:
case A10SR_RESET_USB:
return id + 11;
default:
return -EINVAL;
}
}
static int a10sr_reset_update(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
int offset = a10sr_reset_shift(id);
u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
return regmap_update_bits(a10r->regmap, index, mask, assert ? 0 : mask);
}
static int a10sr_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return a10sr_reset_update(rcdev, id, true);
}
static int a10sr_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return a10sr_reset_update(rcdev, id, false);
}
static int a10sr_reset_status(struct reset_controller_dev *rcdev,
unsigned long id)
{
int ret;
struct a10sr_reset *a10r = to_a10sr_rst(rcdev);
int offset = a10sr_reset_shift(id);
u8 mask = ALTR_A10SR_REG_BIT_MASK(offset);
int index = ALTR_A10SR_HPS_RST_REG + ALTR_A10SR_REG_OFFSET(offset);
unsigned int value;
ret = regmap_read(a10r->regmap, index, &value);
if (ret < 0)
return ret;
return !!(value & mask);
}
static const struct reset_control_ops a10sr_reset_ops = {
.assert = a10sr_reset_assert,
.deassert = a10sr_reset_deassert,
.status = a10sr_reset_status,
};
static int a10sr_reset_probe(struct platform_device *pdev)
{
struct altr_a10sr *a10sr = dev_get_drvdata(pdev->dev.parent);
struct a10sr_reset *a10r;
a10r = devm_kzalloc(&pdev->dev, sizeof(struct a10sr_reset),
GFP_KERNEL);
if (!a10r)
return -ENOMEM;
a10r->rcdev.owner = THIS_MODULE;
a10r->rcdev.nr_resets = A10SR_RESET_NUM;
a10r->rcdev.ops = &a10sr_reset_ops;
a10r->rcdev.of_node = pdev->dev.of_node;
a10r->regmap = a10sr->regmap;
platform_set_drvdata(pdev, a10r);
return devm_reset_controller_register(&pdev->dev, &a10r->rcdev);
}
static const struct of_device_id a10sr_reset_of_match[] = {
{ .compatible = "altr,a10sr-reset" },
{ },
};
MODULE_DEVICE_TABLE(of, a10sr_reset_of_match);
static struct platform_driver a10sr_reset_driver = {
.probe = a10sr_reset_probe,
.driver = {
.name = "altr_a10sr_reset",
},
};
module_platform_driver(a10sr_reset_driver);
MODULE_AUTHOR("Thor Thayer <thor.thayer@linux.intel.com>");
MODULE_DESCRIPTION("Altera Arria10 System Resource Reset Controller Driver");
MODULE_LICENSE("GPL v2");
/*
* AR71xx Reset Controller Driver
* Author: Alban Bedel
*
* Copyright (C) 2015 Alban Bedel <albeu@free.fr>
*
* This program is free software; you can redistribute it and/or modify
......@@ -13,7 +16,7 @@
*/
#include <linux/io.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/reboot.h>
......@@ -127,31 +130,17 @@ static int ath79_reset_probe(struct platform_device *pdev)
return 0;
}
static int ath79_reset_remove(struct platform_device *pdev)
{
struct ath79_reset *ath79_reset = platform_get_drvdata(pdev);
unregister_restart_handler(&ath79_reset->restart_nb);
return 0;
}
static const struct of_device_id ath79_reset_dt_ids[] = {
{ .compatible = "qca,ar7100-reset", },
{ },
};
MODULE_DEVICE_TABLE(of, ath79_reset_dt_ids);
static struct platform_driver ath79_reset_driver = {
.probe = ath79_reset_probe,
.remove = ath79_reset_remove,
.driver = {
.name = "ath79-reset",
.of_match_table = ath79_reset_dt_ids,
.name = "ath79-reset",
.of_match_table = ath79_reset_dt_ids,
.suppress_bind_attrs = true,
},
};
module_platform_driver(ath79_reset_driver);
MODULE_AUTHOR("Alban Bedel <albeu@free.fr>");
MODULE_DESCRIPTION("AR71xx Reset Controller Driver");
MODULE_LICENSE("GPL");
builtin_platform_driver(ath79_reset_driver);
/*
* Copyright (c) 2017, Impinj, Inc.
*
* i.MX7 System Reset Controller (SRC) driver
*
* Author: Andrey Smirnov <andrew.smirnov@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/mfd/syscon.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
#include <linux/regmap.h>
#include <dt-bindings/reset/imx7-reset.h>
struct imx7_src {
struct reset_controller_dev rcdev;
struct regmap *regmap;
};
enum imx7_src_registers {
SRC_A7RCR0 = 0x0004,
SRC_M4RCR = 0x000c,
SRC_ERCR = 0x0014,
SRC_HSICPHY_RCR = 0x001c,
SRC_USBOPHY1_RCR = 0x0020,
SRC_USBOPHY2_RCR = 0x0024,
SRC_MIPIPHY_RCR = 0x0028,
SRC_PCIEPHY_RCR = 0x002c,
SRC_DDRC_RCR = 0x1000,
};
struct imx7_src_signal {
unsigned int offset, bit;
};
static const struct imx7_src_signal imx7_src_signals[IMX7_RESET_NUM] = {
[IMX7_RESET_A7_CORE_POR_RESET0] = { SRC_A7RCR0, BIT(0) },
[IMX7_RESET_A7_CORE_POR_RESET1] = { SRC_A7RCR0, BIT(1) },
[IMX7_RESET_A7_CORE_RESET0] = { SRC_A7RCR0, BIT(4) },
[IMX7_RESET_A7_CORE_RESET1] = { SRC_A7RCR0, BIT(5) },
[IMX7_RESET_A7_DBG_RESET0] = { SRC_A7RCR0, BIT(8) },
[IMX7_RESET_A7_DBG_RESET1] = { SRC_A7RCR0, BIT(9) },
[IMX7_RESET_A7_ETM_RESET0] = { SRC_A7RCR0, BIT(12) },
[IMX7_RESET_A7_ETM_RESET1] = { SRC_A7RCR0, BIT(13) },
[IMX7_RESET_A7_SOC_DBG_RESET] = { SRC_A7RCR0, BIT(20) },
[IMX7_RESET_A7_L2RESET] = { SRC_A7RCR0, BIT(21) },
[IMX7_RESET_SW_M4C_RST] = { SRC_M4RCR, BIT(1) },
[IMX7_RESET_SW_M4P_RST] = { SRC_M4RCR, BIT(2) },
[IMX7_RESET_EIM_RST] = { SRC_ERCR, BIT(0) },
[IMX7_RESET_HSICPHY_PORT_RST] = { SRC_HSICPHY_RCR, BIT(1) },
[IMX7_RESET_USBPHY1_POR] = { SRC_USBOPHY1_RCR, BIT(0) },
[IMX7_RESET_USBPHY1_PORT_RST] = { SRC_USBOPHY1_RCR, BIT(1) },
[IMX7_RESET_USBPHY2_POR] = { SRC_USBOPHY2_RCR, BIT(0) },
[IMX7_RESET_USBPHY2_PORT_RST] = { SRC_USBOPHY2_RCR, BIT(1) },
[IMX7_RESET_MIPI_PHY_MRST] = { SRC_MIPIPHY_RCR, BIT(1) },
[IMX7_RESET_MIPI_PHY_SRST] = { SRC_MIPIPHY_RCR, BIT(2) },
[IMX7_RESET_PCIEPHY] = { SRC_PCIEPHY_RCR, BIT(2) | BIT(1) },
[IMX7_RESET_PCIEPHY_PERST] = { SRC_PCIEPHY_RCR, BIT(3) },
[IMX7_RESET_PCIE_CTRL_APPS_EN] = { SRC_PCIEPHY_RCR, BIT(6) },
[IMX7_RESET_DDRC_PRST] = { SRC_DDRC_RCR, BIT(0) },
[IMX7_RESET_DDRC_CORE_RST] = { SRC_DDRC_RCR, BIT(1) },
};
static struct imx7_src *to_imx7_src(struct reset_controller_dev *rcdev)
{
return container_of(rcdev, struct imx7_src, rcdev);
}
static int imx7_reset_set(struct reset_controller_dev *rcdev,
unsigned long id, bool assert)
{
struct imx7_src *imx7src = to_imx7_src(rcdev);
const struct imx7_src_signal *signal = &imx7_src_signals[id];
unsigned int value = 0;
switch (id) {
case IMX7_RESET_PCIEPHY:
/*
* wait for more than 10us to release phy g_rst and
* btnrst
*/
if (!assert)
udelay(10);
break;
case IMX7_RESET_PCIE_CTRL_APPS_EN:
value = (assert) ? 0 : signal->bit;
break;
}
return regmap_update_bits(imx7src->regmap,
signal->offset, signal->bit, value);
}
static int imx7_reset_assert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return imx7_reset_set(rcdev, id, true);
}
static int imx7_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
return imx7_reset_set(rcdev, id, false);
}
static const struct reset_control_ops imx7_reset_ops = {
.assert = imx7_reset_assert,
.deassert = imx7_reset_deassert,
};
static int imx7_reset_probe(struct platform_device *pdev)
{
struct imx7_src *imx7src;
struct device *dev = &pdev->dev;
struct regmap_config config = { .name = "src" };
imx7src = devm_kzalloc(dev, sizeof(*imx7src), GFP_KERNEL);
if (!imx7src)
return -ENOMEM;
imx7src->regmap = syscon_node_to_regmap(dev->of_node);
if (IS_ERR(imx7src->regmap)) {
dev_err(dev, "Unable to get imx7-src regmap");
return PTR_ERR(imx7src->regmap);
}
regmap_attach_dev(dev, imx7src->regmap, &config);
imx7src->rcdev.owner = THIS_MODULE;
imx7src->rcdev.nr_resets = IMX7_RESET_NUM;
imx7src->rcdev.ops = &imx7_reset_ops;
imx7src->rcdev.of_node = dev->of_node;
return devm_reset_controller_register(dev, &imx7src->rcdev);
}
static const struct of_device_id imx7_reset_dt_ids[] = {
{ .compatible = "fsl,imx7d-src", },
{ /* sentinel */ },
};
static struct platform_driver imx7_reset_driver = {
.probe = imx7_reset_probe,
.driver = {
.name = KBUILD_MODNAME,
.of_match_table = imx7_reset_dt_ids,
},
};
builtin_platform_driver(imx7_reset_driver);
/*
* Amlogic Meson Reset Controller driver
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
......@@ -53,7 +55,7 @@
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/of.h>
#include <linux/platform_device.h>
......@@ -95,7 +97,6 @@ static const struct of_device_id meson_reset_dt_ids[] = {
{ .compatible = "amlogic,meson-gxbb-reset", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, meson_reset_dt_ids);
static int meson_reset_probe(struct platform_device *pdev)
{
......@@ -128,9 +129,4 @@ static struct platform_driver meson_reset_driver = {
.of_match_table = meson_reset_dt_ids,
},
};
module_platform_driver(meson_reset_driver);
MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
MODULE_DESCRIPTION("Amlogic Meson Reset Controller driver");
MODULE_LICENSE("Dual BSD/GPL");
builtin_platform_driver(meson_reset_driver);
......@@ -18,7 +18,7 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/reset-controller.h>
......@@ -83,7 +83,6 @@ static const struct of_device_id oxnas_reset_dt_ids[] = {
{ .compatible = "oxsemi,ox820-reset", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, oxnas_reset_dt_ids);
static int oxnas_reset_probe(struct platform_device *pdev)
{
......@@ -123,5 +122,4 @@ static struct platform_driver oxnas_reset_driver = {
.of_match_table = oxnas_reset_dt_ids,
},
};
module_platform_driver(oxnas_reset_driver);
builtin_platform_driver(oxnas_reset_driver);
......@@ -10,7 +10,7 @@
* version 2, as published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
......@@ -128,7 +128,6 @@ static const struct of_device_id pistachio_reset_dt_ids[] = {
{ .compatible = "img,pistachio-reset", },
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, pistachio_reset_dt_ids);
static struct platform_driver pistachio_reset_driver = {
.probe = pistachio_reset_probe,
......@@ -137,8 +136,4 @@ static struct platform_driver pistachio_reset_driver = {
.of_match_table = pistachio_reset_dt_ids,
},
};
module_platform_driver(pistachio_reset_driver);
MODULE_AUTHOR("Damien Horsley <Damien.Horsley@imgtec.com>");
MODULE_DESCRIPTION("Pistacho Reset Controller Driver");
MODULE_LICENSE("GPL v2");
builtin_platform_driver(pistachio_reset_driver);
......@@ -25,7 +25,8 @@
#include <linux/spinlock.h>
#include <linux/types.h>
#define NR_BANKS 4
#define BANK_INCREMENT 4
#define NR_BANKS 8
struct socfpga_reset_data {
spinlock_t lock;
......@@ -46,8 +47,8 @@ static int socfpga_reset_assert(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
reg = readl(data->membase + (bank * NR_BANKS));
writel(reg | BIT(offset), data->membase + (bank * NR_BANKS));
reg = readl(data->membase + (bank * BANK_INCREMENT));
writel(reg | BIT(offset), data->membase + (bank * BANK_INCREMENT));
spin_unlock_irqrestore(&data->lock, flags);
return 0;
......@@ -67,8 +68,8 @@ static int socfpga_reset_deassert(struct reset_controller_dev *rcdev,
spin_lock_irqsave(&data->lock, flags);
reg = readl(data->membase + (bank * NR_BANKS));
writel(reg & ~BIT(offset), data->membase + (bank * NR_BANKS));
reg = readl(data->membase + (bank * BANK_INCREMENT));
writel(reg & ~BIT(offset), data->membase + (bank * BANK_INCREMENT));
spin_unlock_irqrestore(&data->lock, flags);
......@@ -84,7 +85,7 @@ static int socfpga_reset_status(struct reset_controller_dev *rcdev,
int offset = id % BITS_PER_LONG;
u32 reg;
reg = readl(data->membase + (bank * NR_BANKS));
reg = readl(data->membase + (bank * BANK_INCREMENT));
return !(reg & BIT(offset));
}
......
......@@ -34,15 +34,16 @@ static int sunxi_reset_assert(struct reset_controller_dev *rcdev,
struct sunxi_reset_data *data = container_of(rcdev,
struct sunxi_reset_data,
rcdev);
int bank = id / BITS_PER_LONG;
int offset = id % BITS_PER_LONG;
int reg_width = sizeof(u32);
int bank = id / (reg_width * BITS_PER_BYTE);
int offset = id % (reg_width * BITS_PER_BYTE);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&data->lock, flags);
reg = readl(data->membase + (bank * 4));
writel(reg & ~BIT(offset), data->membase + (bank * 4));
reg = readl(data->membase + (bank * reg_width));
writel(reg & ~BIT(offset), data->membase + (bank * reg_width));
spin_unlock_irqrestore(&data->lock, flags);
......@@ -55,15 +56,16 @@ static int sunxi_reset_deassert(struct reset_controller_dev *rcdev,
struct sunxi_reset_data *data = container_of(rcdev,
struct sunxi_reset_data,
rcdev);
int bank = id / BITS_PER_LONG;
int offset = id % BITS_PER_LONG;
int reg_width = sizeof(u32);
int bank = id / (reg_width * BITS_PER_BYTE);
int offset = id % (reg_width * BITS_PER_BYTE);
unsigned long flags;
u32 reg;
spin_lock_irqsave(&data->lock, flags);
reg = readl(data->membase + (bank * 4));
writel(reg | BIT(offset), data->membase + (bank * 4));
reg = readl(data->membase + (bank * reg_width));
writel(reg | BIT(offset), data->membase + (bank * reg_width));
spin_unlock_irqrestore(&data->lock, flags);
......
......@@ -65,12 +65,12 @@ struct uniphier_reset_data {
#define UNIPHIER_PRO4_SYS_RESET_USB3(id, ch) \
UNIPHIER_RESETX((id), 0x2000 + 0x4 * (ch), 17)
const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_sld3_sys_reset_data[] = {
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* Ether, HSC, MIO */
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, MIO, RLE */
UNIPHIER_PRO4_SYS_RESET_GIO(12), /* Ether, SATA, USB3 */
UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
......@@ -78,7 +78,7 @@ const struct uniphier_reset_data uniphier_pro4_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC */
UNIPHIER_PRO4_SYS_RESET_GIO(12), /* PCIe, USB3 */
UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
......@@ -86,7 +86,7 @@ const struct uniphier_reset_data uniphier_pro5_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
UNIPHIER_SLD3_SYS_RESET_STDMAC(8), /* HSC, RLE */
UNIPHIER_PRO4_SYS_RESET_USB3(14, 0),
UNIPHIER_PRO4_SYS_RESET_USB3(15, 1),
......@@ -100,12 +100,12 @@ const struct uniphier_reset_data uniphier_pxs2_sys_reset_data[] = {
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_ld11_sys_reset_data[] = {
UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC, MIO */
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
static const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
UNIPHIER_LD11_SYS_RESET_STDMAC(8), /* HSC */
UNIPHIER_LD20_SYS_RESET_GIO(12), /* PCIe, USB3 */
UNIPHIER_RESETX(16, 0x200c, 12), /* USB30-PHY0 */
......@@ -134,7 +134,7 @@ const struct uniphier_reset_data uniphier_ld20_sys_reset_data[] = {
#define UNIPHIER_MIO_RESET_DMAC(id) \
UNIPHIER_RESETX((id), 0x110, 17)
const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
static const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
UNIPHIER_MIO_RESET_SD(0, 0),
UNIPHIER_MIO_RESET_SD(1, 1),
UNIPHIER_MIO_RESET_SD(2, 2),
......@@ -154,7 +154,7 @@ const struct uniphier_reset_data uniphier_sld3_mio_reset_data[] = {
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
static const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
UNIPHIER_MIO_RESET_SD(0, 0),
UNIPHIER_MIO_RESET_SD(1, 1),
UNIPHIER_MIO_RESET_EMMC_HW_RESET(6, 1),
......@@ -171,7 +171,7 @@ const struct uniphier_reset_data uniphier_pro5_sd_reset_data[] = {
#define UNIPHIER_PERI_RESET_FI2C(id, ch) \
UNIPHIER_RESETX((id), 0x114, 24 + (ch))
const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
static const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
UNIPHIER_PERI_RESET_UART(2, 2),
......@@ -184,7 +184,7 @@ const struct uniphier_reset_data uniphier_ld4_peri_reset_data[] = {
UNIPHIER_RESET_END,
};
const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
static const struct uniphier_reset_data uniphier_pro4_peri_reset_data[] = {
UNIPHIER_PERI_RESET_UART(0, 0),
UNIPHIER_PERI_RESET_UART(1, 1),
UNIPHIER_PERI_RESET_UART(2, 2),
......
/*
* Copyright Intel Corporation (C) 2017. All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program. If not, see <http://www.gnu.org/licenses/>.
*
* Reset binding definitions for Altera Arria10 MAX5 System Resource Chip
*
* Adapted from altr,rst-mgr-a10.h
*/
#ifndef _DT_BINDINGS_RESET_ALTR_RST_MGR_A10SR_H
#define _DT_BINDINGS_RESET_ALTR_RST_MGR_A10SR_H
/* Peripheral PHY resets */
#define A10SR_RESET_ENET_HPS 0
#define A10SR_RESET_PCIE 1
#define A10SR_RESET_FILE 2
#define A10SR_RESET_BQSPI 3
#define A10SR_RESET_USB 4
#define A10SR_RESET_NUM 5
#endif
/*
* Copyright (C) 2017 Impinj, Inc.
*
* Author: Andrey Smirnov <andrew.smirnov@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef DT_BINDING_RESET_IMX7_H
#define DT_BINDING_RESET_IMX7_H
#define IMX7_RESET_A7_CORE_POR_RESET0 0
#define IMX7_RESET_A7_CORE_POR_RESET1 1
#define IMX7_RESET_A7_CORE_RESET0 2
#define IMX7_RESET_A7_CORE_RESET1 3
#define IMX7_RESET_A7_DBG_RESET0 4
#define IMX7_RESET_A7_DBG_RESET1 5
#define IMX7_RESET_A7_ETM_RESET0 6
#define IMX7_RESET_A7_ETM_RESET1 7
#define IMX7_RESET_A7_SOC_DBG_RESET 8
#define IMX7_RESET_A7_L2RESET 9
#define IMX7_RESET_SW_M4C_RST 10
#define IMX7_RESET_SW_M4P_RST 11
#define IMX7_RESET_EIM_RST 12
#define IMX7_RESET_HSICPHY_PORT_RST 13
#define IMX7_RESET_USBPHY1_POR 14
#define IMX7_RESET_USBPHY1_PORT_RST 15
#define IMX7_RESET_USBPHY2_POR 16
#define IMX7_RESET_USBPHY2_PORT_RST 17
#define IMX7_RESET_MIPI_PHY_MRST 18
#define IMX7_RESET_MIPI_PHY_SRST 19
/*
* IMX7_RESET_PCIEPHY is a logical reset line combining PCIEPHY_BTN
* and PCIEPHY_G_RST
*/
#define IMX7_RESET_PCIEPHY 20
#define IMX7_RESET_PCIEPHY_PERST 21
/*
* IMX7_RESET_PCIE_CTRL_APPS_EN is not strictly a reset line, but it
* can be used to inhibit PCIe LTTSM, so, in a way, it can be thoguht
* of as one
*/
#define IMX7_RESET_PCIE_CTRL_APPS_EN 22
#define IMX7_RESET_DDRC_PRST 23
#define IMX7_RESET_DDRC_CORE_RST 24
#define IMX7_RESET_NUM 25
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment