scsi: hisi_sas: optimise port id refresh function

Currently refreshing the PHY port id after reset is done in the rescan
topology function, which is quite late in the reset process. It could be moved
earlier in the process, as the port id can be refreshed once the PHYs become
ready.

In addition to this, we should set the hisi_sas_dev port id to 0xff (invalid
port id) if all PHYs of this port remain down for the same device.
Signed-off-by: Xiaofei Tan <tanxiaofei@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

drivers/scsi/hisi_sas/hisi_sas_main.c

@@ -990,27 +990,42 @@ static int hisi_sas_debug_issue_ssp_tmf(struct domain_device *device,
 				sizeof(ssp_task), tmf);
 }
 
-static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba,
-		struct asd_sas_port *sas_port, enum sas_linkrate linkrate)
+static void hisi_sas_refresh_port_id(struct hisi_hba *hisi_hba)
 {
-	struct hisi_sas_device	*sas_dev;
-	struct domain_device *device;
+	u32 state = hisi_hba->hw->get_phys_state(hisi_hba);
 	int i;
 
 	for (i = 0; i < HISI_SAS_MAX_DEVICES; i++) {
-		sas_dev = &hisi_hba->devices[i];
-		device = sas_dev->sas_device;
+		struct hisi_sas_device *sas_dev = &hisi_hba->devices[i];
+		struct domain_device *device = sas_dev->sas_device;
+		struct asd_sas_port *sas_port;
+		struct hisi_sas_port *port;
+		struct hisi_sas_phy *phy = NULL;
+		struct asd_sas_phy *sas_phy;
+
 		if ((sas_dev->dev_type == SAS_PHY_UNUSED)
-				|| !device || (device->port != sas_port))
+				|| !device || !device->port)
 			continue;
 
-		hisi_hba->hw->clear_itct(hisi_hba, sas_dev);
+		sas_port = device->port;
+		port = to_hisi_sas_port(sas_port);
+
+		list_for_each_entry(sas_phy, &sas_port->phy_list, port_phy_el)
+			if (state & BIT(sas_phy->id)) {
+				phy = sas_phy->lldd_phy;
+				break;
+			}
+
+		if (phy) {
+			port->id = phy->port_id;
 
-		/* Update linkrate of directly attached device. */
-		if (!device->parent)
-			device->linkrate = linkrate;
+			/* Update linkrate of directly attached device. */
+			if (!device->parent)
+				device->linkrate = phy->sas_phy.linkrate;
 
-		hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+			hisi_hba->hw->setup_itct(hisi_hba, sas_dev);
+		} else
+			port->id = 0xff;
 	}
 }
 
@@ -1025,21 +1040,17 @@ static void hisi_sas_rescan_topology(struct hisi_hba *hisi_hba, u32 old_state,
 		struct hisi_sas_phy *phy = &hisi_hba->phy[phy_no];
 		struct asd_sas_phy *sas_phy = &phy->sas_phy;
 		struct asd_sas_port *sas_port = sas_phy->port;
-		struct hisi_sas_port *port = to_hisi_sas_port(sas_port);
 		bool do_port_check = !!(_sas_port != sas_port);
 
 		if (!sas_phy->phy->enabled)
 			continue;
 
 		/* Report PHY state change to libsas */
-		if (state & (1 << phy_no)) {
-			if (do_port_check && sas_port) {
+		if (state & BIT(phy_no)) {
+			if (do_port_check && sas_port && sas_port->port_dev) {
 				struct domain_device *dev = sas_port->port_dev;
 
 				_sas_port = sas_port;
-				port->id = phy->port_id;
-				hisi_sas_refresh_port_id(hisi_hba,
-						sas_port, sas_phy->linkrate);
 
 				if (DEV_IS_EXPANDER(dev->dev_type))
 					sas_ha->notify_port_event(sas_phy,
@@ -1088,6 +1099,7 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba)
 	/* Init and wait for PHYs to come up and all libsas event finished. */
 	hisi_hba->hw->phys_init(hisi_hba);
 	msleep(1000);
+	hisi_sas_refresh_port_id(hisi_hba);
 	drain_workqueue(hisi_hba->wq);
 	drain_workqueue(shost->work_q);