Skip to content

L
linux
Commit a796fab2 authored by Brian Masney's avatar Brian Masney Committed by Linus Walleij
Browse files
Options

arm: dts: qcom: msm8660: add interrupt controller properties 

Add interrupt controller properties now that ssbi-gpio is a proper
hierarchical IRQ chip. The interrupts property is no longer needed so
remove it.

This change was tested on an APQ8060 DragonBoard.
Signed-off-by: default avatarBrian Masney <masneyb@onstation.org>
Tested-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent e2f6c888
Hide whitespace changes
Inline Side-by-side
Showing with 2 additions and 45 deletions
arch/arm/boot/dts/qcom-msm8660.dtsi
View file @ a796fab2
...@@ -285,51 +285,8 @@ pm8058_gpio: gpio@150 { ...@@ -285,51 +285,8 @@ pm8058_gpio: gpio@150 {
compatible = "qcom,pm8058-gpio", compatible = "qcom,pm8058-gpio",
"qcom,ssbi-gpio"; "qcom,ssbi-gpio";
reg = <0x150>; reg = <0x150>;
interrupt-parent = <&pm8058>; interrupt-controller;
interrupts = <192 IRQ_TYPE_NONE>, #interrupt-cells = <2>;
<193 IRQ_TYPE_NONE>,
<194 IRQ_TYPE_NONE>,
<195 IRQ_TYPE_NONE>,
<196 IRQ_TYPE_NONE>,
<197 IRQ_TYPE_NONE>,
<198 IRQ_TYPE_NONE>,
<199 IRQ_TYPE_NONE>,
<200 IRQ_TYPE_NONE>,
<201 IRQ_TYPE_NONE>,
<202 IRQ_TYPE_NONE>,
<203 IRQ_TYPE_NONE>,
<204 IRQ_TYPE_NONE>,
<205 IRQ_TYPE_NONE>,
<206 IRQ_TYPE_NONE>,
<207 IRQ_TYPE_NONE>,
<208 IRQ_TYPE_NONE>,
<209 IRQ_TYPE_NONE>,
<210 IRQ_TYPE_NONE>,
<211 IRQ_TYPE_NONE>,
<212 IRQ_TYPE_NONE>,
<213 IRQ_TYPE_NONE>,
<214 IRQ_TYPE_NONE>,
<215 IRQ_TYPE_NONE>,
<216 IRQ_TYPE_NONE>,
<217 IRQ_TYPE_NONE>,
<218 IRQ_TYPE_NONE>,
<219 IRQ_TYPE_NONE>,
<220 IRQ_TYPE_NONE>,
<221 IRQ_TYPE_NONE>,
<222 IRQ_TYPE_NONE>,
<223 IRQ_TYPE_NONE>,
<224 IRQ_TYPE_NONE>,
<225 IRQ_TYPE_NONE>,
<226 IRQ_TYPE_NONE>,
<227 IRQ_TYPE_NONE>,
<228 IRQ_TYPE_NONE>,
<229 IRQ_TYPE_NONE>,
<230 IRQ_TYPE_NONE>,
<231 IRQ_TYPE_NONE>,
<232 IRQ_TYPE_NONE>,
<233 IRQ_TYPE_NONE>,
<234 IRQ_TYPE_NONE>,
<235 IRQ_TYPE_NONE>;
gpio-controller; gpio-controller;
#gpio-cells = <2>; #gpio-cells = <2>;
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7