iio:imu: changed structure name from st_sensors to st_sensor_settings

This patch change structure name and related variables names.
Signed-off-by: Denis Ciocca <denis.ciocca@st.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

drivers/iio/accel/st_accel_core.c

@@ -161,7 +161,7 @@ static const struct iio_chan_spec st_accel_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_accel_sensors[] = {
+static const struct st_sensor_settings st_accel_sensors_settings[] = {
 	{
 		.wai = ST_ACCEL_1_WAI_EXP,
 		.sensors_supported = {
@@ -470,18 +470,19 @@ int st_accel_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_accel_sensors), st_accel_sensors);
+					ARRAY_SIZE(st_accel_sensors_settings),
+					st_accel_sensors_settings);
 	if (err < 0)
 		return err;
 
 	adata->num_data_channels = ST_ACCEL_NUMBER_DATA_CHANNELS;
-	adata->multiread_bit = adata->sensor->multi_read_bit;
-	indio_dev->channels = adata->sensor->ch;
+	adata->multiread_bit = adata->sensor_settings->multi_read_bit;
+	indio_dev->channels = adata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	adata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&adata->sensor->fs.fs_avl[0];
-	adata->odr = adata->sensor->odr.odr_avl[0].hz;
+					&adata->sensor_settings->fs.fs_avl[0];
+	adata->odr = adata->sensor_settings->odr.odr_avl[0].hz;
 
 	if (!plat_data)
 		plat_data =

drivers/iio/gyro/st_gyro_core.c

@@ -103,7 +103,7 @@ static const struct iio_chan_spec st_gyro_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_gyro_sensors[] = {
+static const struct st_sensor_settings st_gyro_sensors_settings[] = {
 	{
 		.wai = ST_GYRO_1_WAI_EXP,
 		.sensors_supported = {
@@ -322,18 +322,19 @@ int st_gyro_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_gyro_sensors), st_gyro_sensors);
+					ARRAY_SIZE(st_gyro_sensors_settings),
+					st_gyro_sensors_settings);
 	if (err < 0)
 		return err;
 
 	gdata->num_data_channels = ST_GYRO_NUMBER_DATA_CHANNELS;
-	gdata->multiread_bit = gdata->sensor->multi_read_bit;
-	indio_dev->channels = gdata->sensor->ch;
+	gdata->multiread_bit = gdata->sensor_settings->multi_read_bit;
+	indio_dev->channels = gdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	gdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&gdata->sensor->fs.fs_avl[0];
-	gdata->odr = gdata->sensor->odr.odr_avl[0].hz;
+					&gdata->sensor_settings->fs.fs_avl[0];
+	gdata->odr = gdata->sensor_settings->odr.odr_avl[0].hz;
 
 	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)

drivers/iio/magnetometer/st_magn_core.c

@@ -146,7 +146,7 @@ static const struct iio_chan_spec st_magn_2_16bit_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(3)
 };
 
-static const struct st_sensors st_magn_sensors[] = {
+static const struct st_sensor_settings st_magn_sensors_settings[] = {
 	{
 		.wai = ST_MAGN_1_WAI_EXP,
 		.sensors_supported = {
@@ -366,18 +366,19 @@ int st_magn_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-				ARRAY_SIZE(st_magn_sensors), st_magn_sensors);
+					ARRAY_SIZE(st_magn_sensors_settings),
+					st_magn_sensors_settings);
 	if (err < 0)
 		return err;
 
 	mdata->num_data_channels = ST_MAGN_NUMBER_DATA_CHANNELS;
-	mdata->multiread_bit = mdata->sensor->multi_read_bit;
-	indio_dev->channels = mdata->sensor->ch;
+	mdata->multiread_bit = mdata->sensor_settings->multi_read_bit;
+	indio_dev->channels = mdata->sensor_settings->ch;
 	indio_dev->num_channels = ST_SENSORS_NUMBER_ALL_CHANNELS;
 
 	mdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-						&mdata->sensor->fs.fs_avl[0];
-	mdata->odr = mdata->sensor->odr.odr_avl[0].hz;
+					&mdata->sensor_settings->fs.fs_avl[0];
+	mdata->odr = mdata->sensor_settings->odr.odr_avl[0].hz;
 
 	err = st_sensors_init_sensor(indio_dev, pdata);
 	if (err < 0)

drivers/iio/pressure/st_pressure_core.c

@@ -175,7 +175,7 @@ static const struct iio_chan_spec st_press_lps001wp_channels[] = {
 	IIO_CHAN_SOFT_TIMESTAMP(1)
 };
 
-static const struct st_sensors st_press_sensors[] = {
+static const struct st_sensor_settings st_press_sensors_settings[] = {
 	{
 		.wai = ST_PRESS_LPS331AP_WAI_EXP,
 		.sensors_supported = {
@@ -422,24 +422,24 @@ int st_press_common_probe(struct iio_dev *indio_dev,
 	st_sensors_power_enable(indio_dev);
 
 	err = st_sensors_check_device_support(indio_dev,
-					      ARRAY_SIZE(st_press_sensors),
-					      st_press_sensors);
+					ARRAY_SIZE(st_press_sensors_settings),
+					st_press_sensors_settings);
 	if (err < 0)
 		return err;
 
 	pdata->num_data_channels = ST_PRESS_NUMBER_DATA_CHANNELS;
-	pdata->multiread_bit     = pdata->sensor->multi_read_bit;
-	indio_dev->channels      = pdata->sensor->ch;
-	indio_dev->num_channels  = pdata->sensor->num_ch;
+	pdata->multiread_bit = pdata->sensor_settings->multi_read_bit;
+	indio_dev->channels = pdata->sensor_settings->ch;
+	indio_dev->num_channels = pdata->sensor_settings->num_ch;
 
-	if (pdata->sensor->fs.addr != 0)
+	if (pdata->sensor_settings->fs.addr != 0)
 		pdata->current_fullscale = (struct st_sensor_fullscale_avl *)
-			&pdata->sensor->fs.fs_avl[0];
+			&pdata->sensor_settings->fs.fs_avl[0];
 
-	pdata->odr = pdata->sensor->odr.odr_avl[0].hz;
+	pdata->odr = pdata->sensor_settings->odr.odr_avl[0].hz;
 
 	/* Some devices don't support a data ready pin. */
-	if (!plat_data && pdata->sensor->drdy_irq.addr)
+	if (!plat_data && pdata->sensor_settings->drdy_irq.addr)
 		plat_data =
 			(struct st_sensors_platform_data *)&default_press_pdata;
 

include/linux/iio/common/st_sensors.h

@@ -164,7 +164,7 @@ struct st_sensor_transfer_function {
 };
 
 /**
- * struct st_sensors - ST sensors list
+ * struct st_sensor_settings - ST specific sensor settings
  * @wai: Contents of WhoAmI register.
  * @sensors_supported: List of supported sensors by struct itself.
  * @ch: IIO channels for the sensor.
@@ -177,7 +177,7 @@ struct st_sensor_transfer_function {
  * @multi_read_bit: Use or not particular bit for [I2C/SPI] multi-read.
  * @bootime: samples to discard when sensor passing from power-down to power-up.
  */
-struct st_sensors {
+struct st_sensor_settings {
 	u8 wai;
 	char sensors_supported[ST_SENSORS_MAX_4WAI][ST_SENSORS_MAX_NAME];
 	struct iio_chan_spec *ch;
@@ -196,7 +196,7 @@ struct st_sensors {
  * struct st_sensor_data - ST sensor device status
  * @dev: Pointer to instance of struct device (I2C or SPI).
  * @trig: The trigger in use by the core driver.
- * @sensor: Pointer to the current sensor struct in use.
+ * @sensor_settings: Pointer to the specific sensor settings in use.
  * @current_fullscale: Maximum range of measure by the sensor.
  * @vdd: Pointer to sensor's Vdd power supply
  * @vdd_io: Pointer to sensor's Vdd-IO power supply
@@ -213,7 +213,7 @@ struct st_sensors {
 struct st_sensor_data {
 	struct device *dev;
 	struct iio_trigger *trig;
-	struct st_sensors *sensor;
+	struct st_sensor_settings *sensor_settings;
 	struct st_sensor_fullscale_avl *current_fullscale;
 	struct regulator *vdd;
 	struct regulator *vdd_io;
@@ -279,7 +279,7 @@ int st_sensors_read_info_raw(struct iio_dev *indio_dev,
 				struct iio_chan_spec const *ch, int *val);
 
 int st_sensors_check_device_support(struct iio_dev *indio_dev,
-			int num_sensors_list, const struct st_sensors *sensors);
+	int num_sensors_list, const struct st_sensor_settings *sensor_settings);
 
 ssize_t st_sensors_sysfs_sampling_frequency_avail(struct device *dev,
 				struct device_attribute *attr, char *buf);