Commit a86b313e authored by Michael Chan's avatar Michael Chan Committed by Jakub Kicinski

bnxt_en: Enable batch mode when using HWRM_NVM_MODIFY to flash packages.

The current scheme allocates a DMA buffer as big as the requested
firmware package file and DMAs the contents to firmware in one
operation.  The buffer size can be several hundred kilo bytes and
the driver may not be able to allocate the memory.  This will cause
firmware upgrade to fail.

Improve the scheme by using smaller DMA blocks and calling firmware to
DMA each block in a batch mode.  Older firmware can cause excessive
NVRAM erases if the block size is too small so we try to allocate a
256K buffer to begin with and size it down successively if we cannot
allocate the memory.
Reviewed-by: default avatarEdwin Peer <edwin.peer@broadcom.com>
Signed-off-by: default avatarMichael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
parent 1432c3f6
......@@ -2432,6 +2432,10 @@ static int bnxt_flash_firmware_from_file(struct net_device *dev,
return rc;
}
#define BNXT_PKG_DMA_SIZE 0x40000
#define BNXT_NVM_MORE_FLAG (cpu_to_le16(NVM_MODIFY_REQ_FLAGS_BATCH_MODE))
#define BNXT_NVM_LAST_FLAG (cpu_to_le16(NVM_MODIFY_REQ_FLAGS_BATCH_LAST))
int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware *fw,
u32 install_type)
{
......@@ -2442,6 +2446,7 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
bool defrag_attempted = false;
dma_addr_t dma_handle;
u8 *kmem = NULL;
u32 modify_len;
u32 item_len;
int rc = 0;
u16 index;
......@@ -2450,8 +2455,19 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
bnxt_hwrm_cmd_hdr_init(bp, &modify, HWRM_NVM_MODIFY, -1, -1);
kmem = dma_alloc_coherent(&bp->pdev->dev, fw->size, &dma_handle,
GFP_KERNEL);
/* Try allocating a large DMA buffer first. Older fw will
* cause excessive NVRAM erases when using small blocks.
*/
modify_len = roundup_pow_of_two(fw->size);
modify_len = min_t(u32, modify_len, BNXT_PKG_DMA_SIZE);
while (1) {
kmem = dma_alloc_coherent(&bp->pdev->dev, modify_len,
&dma_handle, GFP_KERNEL);
if (!kmem && modify_len > PAGE_SIZE)
modify_len /= 2;
else
break;
}
if (!kmem)
return -ENOMEM;
......@@ -2463,6 +2479,8 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
install.install_type = cpu_to_le32(install_type);
do {
u32 copied = 0, len = modify_len;
rc = bnxt_find_nvram_item(dev, BNX_DIR_TYPE_UPDATE,
BNX_DIR_ORDINAL_FIRST,
BNX_DIR_EXT_NONE,
......@@ -2479,14 +2497,26 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
}
modify.dir_idx = cpu_to_le16(index);
modify.len = cpu_to_le32(fw->size);
memcpy(kmem, fw->data, fw->size);
rc = hwrm_send_message(bp, &modify, sizeof(modify),
FLASH_PACKAGE_TIMEOUT);
if (rc)
break;
if (fw->size > modify_len)
modify.flags = BNXT_NVM_MORE_FLAG;
while (copied < fw->size) {
u32 balance = fw->size - copied;
if (balance <= modify_len) {
len = balance;
if (copied)
modify.flags |= BNXT_NVM_LAST_FLAG;
}
memcpy(kmem, fw->data + copied, len);
modify.len = cpu_to_le32(len);
modify.offset = cpu_to_le32(copied);
rc = hwrm_send_message(bp, &modify, sizeof(modify),
FLASH_PACKAGE_TIMEOUT);
if (rc)
goto pkg_abort;
copied += len;
}
mutex_lock(&bp->hwrm_cmd_lock);
rc = _hwrm_send_message_silent(bp, &install, sizeof(install),
INSTALL_PACKAGE_TIMEOUT);
......@@ -2530,7 +2560,8 @@ int bnxt_flash_package_from_fw_obj(struct net_device *dev, const struct firmware
mutex_unlock(&bp->hwrm_cmd_lock);
} while (defrag_attempted && !rc);
dma_free_coherent(&bp->pdev->dev, fw->size, kmem, dma_handle);
pkg_abort:
dma_free_coherent(&bp->pdev->dev, modify_len, kmem, dma_handle);
if (resp.result) {
netdev_err(dev, "PKG install error = %d, problem_item = %d\n",
(s8)resp.result, (int)resp.problem_item);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment