[media] s5p-cec: add cec-notifier support, move out of staging

By using the CEC notifier framework there is no longer any reason
to manually set the physical address. This was the one blocking
issue that prevented this driver from going out of staging, so do
this move as well.

Update the bindings documenting the new hdmi phandle and
update exynos4.dtsi accordingly.

Tested with my Odroid U3.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
CC: linux-samsung-soc@vger.kernel.org
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

drivers/media/platform/Kconfig

@@ -466,6 +466,16 @@ menuconfig V4L_CEC_DRIVERS
 
 if V4L_CEC_DRIVERS
 
+config VIDEO_SAMSUNG_S5P_CEC
+       tristate "Samsung S5P CEC driver"
+       depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST)
+       select MEDIA_CEC_NOTIFIER
+       ---help---
+         This is a driver for Samsung S5P HDMI CEC interface. It uses the
+         generic CEC framework interface.
+         CEC bus is present in the HDMI connector and enables communication
+         between compatible devices.
+
 config VIDEO_STI_HDMI_CEC
        tristate "STMicroelectronics STiH4xx HDMI CEC driver"
        depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_STI || COMPILE_TEST)

drivers/media/platform/Makefile

@@ -33,6 +33,7 @@ obj-$(CONFIG_VIDEO_SAMSUNG_S5P_JPEG)	+= s5p-jpeg/
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_MFC)	+= s5p-mfc/
 
 obj-$(CONFIG_VIDEO_SAMSUNG_S5P_G2D)	+= s5p-g2d/
+obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC)	+= s5p-cec/
 obj-$(CONFIG_VIDEO_SAMSUNG_EXYNOS_GSC)	+= exynos-gsc/
 
 obj-$(CONFIG_VIDEO_STI_BDISP)		+= sti/bdisp/

drivers/staging/media/s5p-cec/s5p_cec.c → drivers/media/platform/s5p-cec/s5p_cec.c

@@ -19,11 +19,14 @@
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/timer.h>
 #include <linux/workqueue.h>
 #include <media/cec.h>
+#include <media/cec-edid.h>
+#include <media/cec-notifier.h>
 
 #include "exynos_hdmi_cec.h"
 #include "regs-cec.h"
@@ -167,10 +170,22 @@ static const struct cec_adap_ops s5p_cec_adap_ops = {
 static int s5p_cec_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
+	struct device_node *np;
+	struct platform_device *hdmi_dev;
 	struct resource *res;
 	struct s5p_cec_dev *cec;
 	int ret;
 
+	np = of_parse_phandle(pdev->dev.of_node, "hdmi-phandle", 0);
+
+	if (!np) {
+		dev_err(&pdev->dev, "Failed to find hdmi node in device tree\n");
+		return -ENODEV;
+	}
+	hdmi_dev = of_find_device_by_node(np);
+	if (hdmi_dev == NULL)
+		return -EPROBE_DEFER;
+
 	cec = devm_kzalloc(&pdev->dev, sizeof(*cec), GFP_KERNEL);
 	if (!cec)
 		return -ENOMEM;
@@ -200,24 +215,33 @@ static int s5p_cec_probe(struct platform_device *pdev)
 	if (IS_ERR(cec->reg))
 		return PTR_ERR(cec->reg);
 
+	cec->notifier = cec_notifier_get(&hdmi_dev->dev);
+	if (cec->notifier == NULL)
+		return -ENOMEM;
+
 	cec->adap = cec_allocate_adapter(&s5p_cec_adap_ops, cec,
 		CEC_NAME,
-		CEC_CAP_PHYS_ADDR | CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT |
+		CEC_CAP_LOG_ADDRS | CEC_CAP_TRANSMIT |
 		CEC_CAP_PASSTHROUGH | CEC_CAP_RC, 1);
 	ret = PTR_ERR_OR_ZERO(cec->adap);
 	if (ret)
 		return ret;
+
 	ret = cec_register_adapter(cec->adap, &pdev->dev);
-	if (ret) {
-		cec_delete_adapter(cec->adap);
-		return ret;
-	}
+	if (ret)
+		goto err_delete_adapter;
+
+	cec_register_cec_notifier(cec->adap, cec->notifier);
 
 	platform_set_drvdata(pdev, cec);
 	pm_runtime_enable(dev);
 
 	dev_dbg(dev, "successfuly probed\n");
 	return 0;
+
+err_delete_adapter:
+	cec_delete_adapter(cec->adap);
+	return ret;
 }
 
 static int s5p_cec_remove(struct platform_device *pdev)
@@ -225,6 +249,7 @@ static int s5p_cec_remove(struct platform_device *pdev)
 	struct s5p_cec_dev *cec = platform_get_drvdata(pdev);
 
 	cec_unregister_adapter(cec->adap);
+	cec_notifier_put(cec->notifier);
 	pm_runtime_disable(&pdev->dev);
 	return 0;
 }

drivers/staging/media/s5p-cec/s5p_cec.h → drivers/media/platform/s5p-cec/s5p_cec.h

@@ -59,12 +59,15 @@ enum cec_state {
 	STATE_ERROR
 };
 
+struct cec_notifier;
+
 struct s5p_cec_dev {
 	struct cec_adapter	*adap;
 	struct clk		*clk;
 	struct device		*dev;
 	struct mutex		lock;
 	struct regmap           *pmu;
+	struct cec_notifier	*notifier;
 	int			irq;
 	void __iomem		*reg;
 

drivers/staging/media/Kconfig

@@ -29,8 +29,6 @@ source "drivers/staging/media/omap4iss/Kconfig"
 
 source "drivers/staging/media/platform/bcm2835/Kconfig"
 
-source "drivers/staging/media/s5p-cec/Kconfig"
-
 # Keep LIRC at the end, as it has sub-menus
 source "drivers/staging/media/lirc/Kconfig"
 

drivers/staging/media/Makefile

 obj-$(CONFIG_I2C_BCM2048)	+= bcm2048/
-obj-$(CONFIG_VIDEO_SAMSUNG_S5P_CEC) += s5p-cec/
 obj-$(CONFIG_DVB_CXD2099)	+= cxd2099/
 obj-$(CONFIG_LIRC_STAGING)	+= lirc/
 obj-$(CONFIG_VIDEO_BCM2835)	+= platform/bcm2835/

drivers/staging/media/s5p-cec/Kconfig

-config VIDEO_SAMSUNG_S5P_CEC
-       tristate "Samsung S5P CEC driver"
-       depends on VIDEO_DEV && MEDIA_CEC_SUPPORT && (ARCH_EXYNOS || COMPILE_TEST)
-       ---help---
-         This is a driver for Samsung S5P HDMI CEC interface. It uses the
-         generic CEC framework interface.
-         CEC bus is present in the HDMI connector and enables communication
-         between compatible devices.
-

drivers/staging/media/s5p-cec/TODO

-This driver requires that userspace sets the physical address.
-However, this should be passed on from the corresponding
-Samsung HDMI driver.
-
-We have to wait until the HDMI notifier framework has been merged
-in order to handle this gracefully, until that time this driver
-has to remain in staging.