HID: ft260: fix i2c probing for hwmon devices

The below scenario causes the kernel NULL pointer dereference failure:
1. sudo insmod hid-ft260.ko
2. sudo modprobe lm75
3. unplug USB hid-ft260
4. plug USB hid-ft260

[  +0.000006] Call Trace:
[  +0.000004]  __i2c_smbus_xfer.part.0+0xd1/0x310
[  +0.000007]  ? ft260_smbus_write+0x140/0x140 [hid_ft260]
[  +0.000005]  __i2c_smbus_xfer+0x2b/0x80
[  +0.000004]  i2c_smbus_xfer+0x61/0xf0
[  +0.000005]  i2c_default_probe+0xf9/0x130
[  +0.000004]  i2c_detect_address+0x84/0x160
[  +0.000004]  ? kmem_cache_alloc_trace+0xf6/0x200
[  +0.000009]  ? i2c_detect.isra.0+0x69/0x130
[  +0.000005]  i2c_detect.isra.0+0xbf/0x130
[  +0.000004]  ? __process_new_driver+0x30/0x30
[  +0.000004]  __process_new_adapter+0x18/0x20
[  +0.000004]  bus_for_each_drv+0x84/0xd0
[  +0.000003]  i2c_register_adapter+0x1e4/0x400
[  +0.000005]  i2c_add_adapter+0x5c/0x80
[  +0.000004]  ft260_probe.cold+0x222/0x2e2 [hid_ft260]
[  +0.000006]  hid_device_probe+0x10e/0x170 [hid]
[  +0.000009]  really_probe+0xff/0x460
[  +0.000004]  driver_probe_device+0xe9/0x160
[  +0.000003]  __device_attach_driver+0x71/0xd0
[  +0.000004]  ? driver_allows_async_probing+0x50/0x50
[  +0.000004]  bus_for_each_drv+0x84/0xd0
[  +0.000002]  __device_attach+0xde/0x1e0
[  +0.000004]  device_initial_probe+0x13/0x20
[  +0.000004]  bus_probe_device+0x8f/0xa0
[  +0.000003]  device_add+0x333/0x5f0

It happened when i2c core probed for the devices associated with the lm75
driver by invoking 2c_detect()-->..-->ft260_smbus_write() from within the
ft260_probe before setting the adapter data with i2c_set_adapdata().

Moving the i2c_set_adapdata() before i2c_add_adapter() fixed the failure.
Signed-off-by: Michael Zaidman <michael.zaidman@gmail.com>
Signed-off-by: Germain Hebert <germain.hebert@ca.abb.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

drivers/hid/hid-ft260.c

@@ -966,24 +966,23 @@ static int ft260_probe(struct hid_device *hdev, const struct hid_device_id *id)
 	mutex_init(&dev->lock);
 	init_completion(&dev->wait);
 
+	ret = ft260_xfer_status(dev);
+	if (ret)
+		ft260_i2c_reset(hdev);
+
+	i2c_set_adapdata(&dev->adap, dev);
 	ret = i2c_add_adapter(&dev->adap);
 	if (ret) {
 		hid_err(hdev, "failed to add i2c adapter\n");
 		goto err_hid_close;
 	}
 
-	i2c_set_adapdata(&dev->adap, dev);
-
 	ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group);
 	if (ret < 0) {
 		hid_err(hdev, "failed to create sysfs attrs\n");
 		goto err_i2c_free;
 	}
 
-	ret = ft260_xfer_status(dev);
-	if (ret)
-		ft260_i2c_reset(hdev);
-
 	return 0;
 
 err_i2c_free: