qlcnic: Fix endian issues in 83xx driver

o Split mailbox structure elements on boundary of adapter
  register size i.e. 32bit.
o Shuffle the position of structure elements based on CPU endianness.
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.c

@@ -15,36 +15,57 @@
 #define RSS_HASHTYPE_IP_TCP		0x3
 
 /* status descriptor mailbox data
- * @phy_addr: physical address of buffer
+ * @phy_addr_{low|high}: physical address of buffer
  * @sds_ring_size: buffer size
  * @intrpt_id: interrupt id
  * @intrpt_val: source of interrupt
  */
 struct qlcnic_sds_mbx {
-	u64	phy_addr;
-	u8	rsvd1[16];
+	u32	phy_addr_low;
+	u32	phy_addr_high;
+	u32	rsvd1[4];
+#if defined(__LITTLE_ENDIAN)
 	u16	sds_ring_size;
-	u16	rsvd2[3];
+	u16	rsvd2;
+	u16	rsvd3[2];
 	u16	intrpt_id;
 	u8	intrpt_val;
-	u8	rsvd3[5];
+	u8	rsvd4;
+#elif defined(__BIG_ENDIAN)
+	u16	rsvd2;
+	u16	sds_ring_size;
+	u16	rsvd3[2];
+	u8	rsvd4;
+	u8	intrpt_val;
+	u16	intrpt_id;
+#endif
+	u32	rsvd5;
 } __packed;
 
 /* receive descriptor buffer data
- * phy_addr_reg: physical address of regular buffer
- * phy_addr_jmb: physical address of jumbo buffer
+ * phy_addr_reg_{low|high}: physical address of regular buffer
+ * phy_addr_jmb_{low|high}: physical address of jumbo buffer
  * reg_ring_sz: size of regular buffer
  * reg_ring_len: no. of entries in regular buffer
  * jmb_ring_len: no. of entries in jumbo buffer
  * jmb_ring_sz: size of jumbo buffer
  */
 struct qlcnic_rds_mbx {
-	u64	phy_addr_reg;
-	u64	phy_addr_jmb;
+	u32	phy_addr_reg_low;
+	u32	phy_addr_reg_high;
+	u32	phy_addr_jmb_low;
+	u32	phy_addr_jmb_high;
+#if defined(__LITTLE_ENDIAN)
 	u16	reg_ring_sz;
 	u16	reg_ring_len;
 	u16	jmb_ring_sz;
 	u16	jmb_ring_len;
+#elif defined(__BIG_ENDIAN)
+	u16	reg_ring_len;
+	u16	reg_ring_sz;
+	u16	jmb_ring_len;
+	u16	jmb_ring_sz;
+#endif
 } __packed;
 
 /* host producers for regular and jumbo rings */
@@ -61,6 +82,7 @@ struct __host_producer_mbx {
  * @phy_port: physical port id
  */
 struct qlcnic_rcv_mbx_out {
+#if defined(__LITTLE_ENDIAN)
 	u8	rcv_num;
 	u8	sts_num;
 	u16	ctx_id;
@@ -68,32 +90,56 @@ struct qlcnic_rcv_mbx_out {
 	u8	num_pci_func;
 	u8	phy_port;
 	u8	vport_id;
+#elif defined(__BIG_ENDIAN)
+	u16	ctx_id;
+	u8	sts_num;
+	u8	rcv_num;
+	u8	vport_id;
+	u8	phy_port;
+	u8	num_pci_func;
+	u8	state;
+#endif
 	u32	host_csmr[QLCNIC_MAX_RING_SETS];
 	struct __host_producer_mbx host_prod[QLCNIC_MAX_RING_SETS];
 } __packed;
 
 struct qlcnic_add_rings_mbx_out {
+#if defined(__LITTLE_ENDIAN)
 	u8      rcv_num;
 	u8      sts_num;
-	u16  ctx_id;
+	u16	ctx_id;
+#elif defined(__BIG_ENDIAN)
+	u16	ctx_id;
+	u8	sts_num;
+	u8	rcv_num;
+#endif
 	u32  host_csmr[QLCNIC_MAX_RING_SETS];
 	struct __host_producer_mbx host_prod[QLCNIC_MAX_RING_SETS];
 } __packed;
 
 /* Transmit context mailbox inbox registers
- * @phys_addr: DMA address of the transmit buffer
- * @cnsmr_index: host consumer index
+ * @phys_addr_{low|high}: DMA address of the transmit buffer
+ * @cnsmr_index_{low|high}: host consumer index
  * @size: legth of transmit buffer ring
  * @intr_id: interrput id
  * @src: src of interrupt
  */
 struct qlcnic_tx_mbx {
-	u64	phys_addr;
-	u64	cnsmr_index;
+	u32	phys_addr_low;
+	u32	phys_addr_high;
+	u32	cnsmr_index_low;
+	u32	cnsmr_index_high;
+#if defined(__LITTLE_ENDIAN)
 	u16	size;
 	u16	intr_id;
 	u8	src;
 	u8	rsvd[3];
+#elif defined(__BIG_ENDIAN)
+	u16	intr_id;
+	u16	size;
+	u8	rsvd[3];
+	u8	src;
+#endif
 } __packed;
 
 /* Transmit context mailbox outbox registers
@@ -101,11 +147,18 @@ struct qlcnic_tx_mbx {
  * @ctx_id: transmit context id
  * @state: state of the transmit context
  */
+
 struct qlcnic_tx_mbx_out {
 	u32	host_prod;
+#if defined(__LITTLE_ENDIAN)
 	u16	ctx_id;
 	u8	state;
 	u8	rsvd;
+#elif defined(__BIG_ENDIAN)
+	u8	rsvd;
+	u8	state;
+	u16	ctx_id;
+#endif
 } __packed;
 
 static const struct qlcnic_mailbox_metadata qlcnic_83xx_mbx_tbl[] = {
@@ -1004,7 +1057,8 @@ static int qlcnic_83xx_add_rings(struct qlcnic_adapter *adapter)
 		sds = &recv_ctx->sds_rings[i];
 		sds->consumer = 0;
 		memset(sds->desc_head, 0, STATUS_DESC_RINGSIZE(sds));
-		sds_mbx.phy_addr = sds->phys_addr;
+		sds_mbx.phy_addr_low = LSD(sds->phys_addr);
+		sds_mbx.phy_addr_high = MSD(sds->phys_addr);
 		sds_mbx.sds_ring_size = sds->num_desc;
 
 		if (adapter->flags & QLCNIC_MSIX_ENABLED)
@@ -1090,7 +1144,8 @@ int qlcnic_83xx_create_rx_ctx(struct qlcnic_adapter *adapter)
 		sds = &recv_ctx->sds_rings[i];
 		sds->consumer = 0;
 		memset(sds->desc_head, 0, STATUS_DESC_RINGSIZE(sds));
-		sds_mbx.phy_addr = sds->phys_addr;
+		sds_mbx.phy_addr_low = LSD(sds->phys_addr);
+		sds_mbx.phy_addr_high = MSD(sds->phys_addr);
 		sds_mbx.sds_ring_size = sds->num_desc;
 		if (adapter->flags & QLCNIC_MSIX_ENABLED)
 			intrpt_id = ahw->intr_tbl[i].id;
@@ -1110,13 +1165,15 @@ int qlcnic_83xx_create_rx_ctx(struct qlcnic_adapter *adapter)
 	rds = &recv_ctx->rds_rings[0];
 	rds->producer = 0;
 	memset(&rds_mbx, 0, rds_mbx_size);
-	rds_mbx.phy_addr_reg = rds->phys_addr;
+	rds_mbx.phy_addr_reg_low = LSD(rds->phys_addr);
+	rds_mbx.phy_addr_reg_high = MSD(rds->phys_addr);
 	rds_mbx.reg_ring_sz = rds->dma_size;
 	rds_mbx.reg_ring_len = rds->num_desc;
 	/* Jumbo ring */
 	rds = &recv_ctx->rds_rings[1];
 	rds->producer = 0;
-	rds_mbx.phy_addr_jmb = rds->phys_addr;
+	rds_mbx.phy_addr_jmb_low = LSD(rds->phys_addr);
+	rds_mbx.phy_addr_jmb_high = MSD(rds->phys_addr);
 	rds_mbx.jmb_ring_sz = rds->dma_size;
 	rds_mbx.jmb_ring_len = rds->num_desc;
 	buf = &cmd.req.arg[index];
@@ -1182,8 +1239,10 @@ int qlcnic_83xx_create_tx_ctx(struct qlcnic_adapter *adapter,
 	memset(&mbx, 0, sizeof(struct qlcnic_tx_mbx));
 
 	/* setup mailbox inbox registerss */
-	mbx.phys_addr = tx->phys_addr;
-	mbx.cnsmr_index = tx->hw_cons_phys_addr;
+	mbx.phys_addr_low = LSD(tx->phys_addr);
+	mbx.phys_addr_high = MSD(tx->phys_addr);
+	mbx.cnsmr_index_low = LSD(tx->hw_cons_phys_addr);
+	mbx.cnsmr_index_high = MSD(tx->hw_cons_phys_addr);
 	mbx.size = tx->num_desc;
 	if (adapter->flags & QLCNIC_MSIX_ENABLED)
 		msix_id = ahw->intr_tbl[adapter->max_sds_rings + ring].id;
@@ -1713,7 +1772,12 @@ int qlcnic_83xx_sre_macaddr_change(struct qlcnic_adapter *adapter, u8 *addr,
 			(adapter->recv_ctx->context_id << 16);
 
 	mv.vlan = le16_to_cpu(vlan_id);
-	memcpy(&mv.mac, addr, ETH_ALEN);
+	mv.mac_addr0 = addr[0];
+	mv.mac_addr1 = addr[1];
+	mv.mac_addr2 = addr[2];
+	mv.mac_addr3 = addr[3];
+	mv.mac_addr4 = addr[4];
+	mv.mac_addr5 = addr[5];
 	buf = &cmd.req.arg[2];
 	memcpy(buf, &mv, sizeof(struct qlcnic_macvlan_mbx));
 	err = qlcnic_issue_cmd(adapter, &cmd);

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_hw.h

@@ -94,8 +94,23 @@ struct qlcnic_intrpt_config {
 };
 
 struct qlcnic_macvlan_mbx {
-	u8	mac[ETH_ALEN];
+#if defined(__LITTLE_ENDIAN)
+	u8	mac_addr0;
+	u8	mac_addr1;
+	u8	mac_addr2;
+	u8	mac_addr3;
+	u8	mac_addr4;
+	u8	mac_addr5;
 	u16	vlan;
+#elif defined(__BIG_ENDIAN)
+	u8	mac_addr3;
+	u8	mac_addr2;
+	u8	mac_addr1;
+	u8	mac_addr0;
+	u16	vlan;
+	u8	mac_addr5;
+	u8	mac_addr4;
+#endif
 };
 
 struct qlc_83xx_fw_info {

drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c

@@ -31,6 +31,7 @@ static int qlcnic_83xx_restart_hw(struct qlcnic_adapter *adapter);
 
 /* Template header */
 struct qlc_83xx_reset_hdr {
+#if defined(__LITTLE_ENDIAN)
 	u16	version;
 	u16	signature;
 	u16	size;
@@ -39,14 +40,31 @@ struct qlc_83xx_reset_hdr {
 	u16	checksum;
 	u16	init_offset;
 	u16	start_offset;
+#elif defined(__BIG_ENDIAN)
+	u16	signature;
+	u16	version;
+	u16	entries;
+	u16	size;
+	u16	checksum;
+	u16	hdr_size;
+	u16	start_offset;
+	u16	init_offset;
+#endif
 } __packed;
 
 /* Command entry header. */
 struct qlc_83xx_entry_hdr {
-	u16 cmd;
-	u16 size;
-	u16 count;
-	u16 delay;
+#if defined(__LITTLE_ENDIAN)
+	u16	cmd;
+	u16	size;
+	u16	count;
+	u16	delay;
+#elif defined(__BIG_ENDIAN)
+	u16	size;
+	u16	cmd;
+	u16	delay;
+	u16	count;
+#endif
 } __packed;
 
 /* Generic poll command */
@@ -60,10 +78,17 @@ struct qlc_83xx_rmw {
 	u32	mask;
 	u32	xor_value;
 	u32	or_value;
+#if defined(__LITTLE_ENDIAN)
 	u8	shl;
 	u8	shr;
 	u8	index_a;
 	u8	rsvd;
+#elif defined(__BIG_ENDIAN)
+	u8	rsvd;
+	u8	index_a;
+	u8	shr;
+	u8	shl;
+#endif
 } __packed;
 
 /* Generic command with 2 DWORD */