Commit a969888c authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman

[PATCH] USB: move usb-serial.h to include/linux/usb/

USB serial outside of the kernel tree can not build properly due to
usb-serial.h being buried down in the source tree.  This patch moves the
location of the file to include/linux/usb and fixes up all of the usb
serial drivers to handle the move properly.

Cc: Sergei Organov <osv@javad.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 166ffccf
......@@ -13,7 +13,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x0c88, 0x17da) }, /* Kyocera Wireless KPC650/Passport */
......
......@@ -13,7 +13,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x16d5, 0x6501) }, /* AirData CDMA device */
......
......@@ -21,7 +21,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static int debug;
......
......@@ -74,7 +74,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "belkin_sa.h"
static int debug;
......
......@@ -13,7 +13,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static int usb_serial_device_match (struct device *dev, struct device_driver *drv)
{
......
......@@ -17,11 +17,10 @@
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
static int debug;
#include "usb-serial.h"
struct usbcons_info {
int magic;
int break_flag;
......
......@@ -26,7 +26,7 @@
#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <asm/uaccess.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
/*
* Version Information
......
......@@ -39,7 +39,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#define CYBERJACK_LOCAL_BUF_SIZE 32
......
......@@ -59,11 +59,11 @@
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/serial.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
#include "usb-serial.h"
#include "cypress_m8.h"
......
......@@ -246,7 +246,7 @@
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/wait.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
/* Defines */
......
......@@ -62,7 +62,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static int debug;
......
......@@ -15,7 +15,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
/* EZ-USB Control and Status Register. Bit 0 controls 8051 reset */
#define CPUCS_REG 0x7F92
......
......@@ -257,7 +257,7 @@
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/serial.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "ftdi_sio.h"
/*
......
......@@ -13,7 +13,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1404, 0xcddc) },
......
......@@ -35,6 +35,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
/* the mode to be set when the port ist opened */
static int initial_mode = 1;
......@@ -42,8 +43,6 @@ static int initial_mode = 1;
/* debug flag */
static int debug = 0;
#include "usb-serial.h"
#define GARMIN_VENDOR_ID 0x091E
/*
......
......@@ -17,8 +17,8 @@
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
#include "usb-serial.h"
static int debug;
......
......@@ -17,7 +17,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
/*
* Version Information
......
......@@ -44,7 +44,7 @@
#include <linux/wait.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "io_edgeport.h"
#include "io_ionsp.h" /* info for the iosp messages */
#include "io_16654.h" /* 16654 UART defines */
......
......@@ -39,8 +39,8 @@
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "usb-serial.h"
#include "io_16654.h"
#include "io_usbvend.h"
#include "io_ti.h"
......
......@@ -55,7 +55,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "ipaq.h"
#define KP_RETRIES 100
......
......@@ -46,8 +46,8 @@
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
#include "usb-serial.h"
/*
* Version Information
......
......@@ -57,7 +57,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
/*
* Version Information
......
......@@ -107,7 +107,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "keyspan.h"
static int debug;
......
......@@ -78,6 +78,7 @@
#include <linux/workqueue.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
static int debug;
......@@ -107,8 +108,6 @@ struct ezusb_hex_record {
#include "xircom_pgs_fw.h"
#endif
#include "usb-serial.h"
/*
* Version Information
*/
......
......@@ -55,7 +55,7 @@
#include <linux/module.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "kl5kusb105.h"
static int debug;
......
......@@ -46,8 +46,8 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include <linux/ioctl.h>
#include "usb-serial.h"
#include "kobil_sct.h"
static int debug;
......
......@@ -75,7 +75,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "mct_u232.h"
/*
......
......@@ -14,7 +14,7 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static int debug;
......
......@@ -46,7 +46,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static int debug;
......
......@@ -65,7 +65,7 @@
#include <linux/tty_flip.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
/* Function prototypes */
static int option_open(struct usb_serial_port *port, struct file *filp);
......
......@@ -27,7 +27,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "pl2303.h"
/*
......
......@@ -71,7 +71,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#ifndef CONFIG_USB_SAFE_PADDED
......
......@@ -14,7 +14,7 @@
#include <linux/tty.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
......
......@@ -83,8 +83,8 @@
#include <asm/uaccess.h>
#include <asm/semaphore.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
#include "usb-serial.h"
#include "ti_usb_3410_5052.h"
#include "ti_fw_3410.h" /* firmware image for 3410 */
#include "ti_fw_5052.h" /* firmware image for 5052 */
......
......@@ -31,7 +31,7 @@
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "pl2303.h"
/*
......
......@@ -25,7 +25,7 @@
#include <linux/spinlock.h>
#include <asm/uaccess.h>
#include <linux/usb.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "visor.h"
/*
......
......@@ -79,7 +79,7 @@
#include <linux/usb.h>
#include <linux/serial_reg.h>
#include <linux/serial.h>
#include "usb-serial.h"
#include <linux/usb/serial.h>
#include "whiteheat_fw.h" /* firmware for the ConnectTech WhiteHEAT device */
#include "whiteheat.h" /* WhiteHEAT specific commands */
......
/*
* USB Serial Converter driver
* USB Serial Converter stuff
*
* Copyright (C) 1999 - 2005
* Greg Kroah-Hartman (greg@kroah.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License.
* the Free Software Foundation; version 2 of the License.
*
*/
......@@ -171,7 +171,7 @@ static inline void usb_set_serial_data (struct usb_serial *serial, void *data)
* but before the device has been fully initialized by the usb_serial
* subsystem. Use this function to download any firmware to the device,
* or any other early initialization that might be needed.
* Return 0 to continue on with the initialization sequence. Anything
* Return 0 to continue on with the initialization sequence. Anything
* else will abort it.
* @attach: pointer to the driver's attach function.
* This will be called when the struct usb_serial structure is fully set
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment