Commit a9c8f68c authored by Andy Shevchenko's avatar Andy Shevchenko Committed by Mark Brown

spi: pxa2xx: Get rid of unused ->cs_control()

Since the last user of the custom ->cs_control() gone, we may get rid of
this legacy API completely.
Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211123192723.44537-2-andriy.shevchenko@linux.intel.comSigned-off-by: default avatarMark Brown <broonie@kernel.org>
parent 342e3ce0
......@@ -102,7 +102,7 @@ device. All fields are optional.
u8 dma_burst_size;
u32 timeout;
u8 enable_loopback;
void (*cs_control)(u32 command);
int gpio_cs;
};
The "pxa2xx_spi_chip.tx_threshold" and "pxa2xx_spi_chip.rx_threshold" fields are
......@@ -133,11 +133,6 @@ into internal loopback mode. In this mode the SSP controller internally
connects the SSPTX pin to the SSPRX pin. This is useful for initial setup
testing.
The "pxa2xx_spi_chip.cs_control" field is used to point to a board specific
function for asserting/deasserting a slave device chip select. If the field is
NULL, the pxa2xx_spi master controller driver assumes that the SSP port is
configured to use GPIO or SSPFRM instead.
NOTE: the SPI driver cannot control the chip select if SSPFRM is used, so the
chipselect is dropped after each spi_transfer. Most devices need chip select
asserted around the complete message. Use SSPFRM as a GPIO (through a descriptor)
......@@ -152,30 +147,12 @@ field. Below is a sample configuration using the PXA255 NSSP.
::
/* Chip Select control for the CS8415A SPI slave device */
static void cs8415a_cs_control(u32 command)
{
if (command & PXA2XX_CS_ASSERT)
GPCR(2) = GPIO_bit(2);
else
GPSR(2) = GPIO_bit(2);
}
/* Chip Select control for the CS8405A SPI slave device */
static void cs8405a_cs_control(u32 command)
{
if (command & PXA2XX_CS_ASSERT)
GPCR(3) = GPIO_bit(3);
else
GPSR(3) = GPIO_bit(3);
}
static struct pxa2xx_spi_chip cs8415a_chip_info = {
.tx_threshold = 8, /* SSP hardward FIFO threshold */
.rx_threshold = 8, /* SSP hardward FIFO threshold */
.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
.timeout = 235, /* See Intel documentation */
.cs_control = cs8415a_cs_control, /* Use external chip select */
.gpio_cs = 2, /* Use external chip select */
};
static struct pxa2xx_spi_chip cs8405a_chip_info = {
......@@ -183,7 +160,7 @@ field. Below is a sample configuration using the PXA255 NSSP.
.rx_threshold = 8, /* SSP hardward FIFO threshold */
.dma_burst_size = 8, /* Byte wide transfers used so 8 byte bursts */
.timeout = 235, /* See Intel documentation */
.cs_control = cs8405a_cs_control, /* Use external chip select */
.gpio_cs = 3, /* Use external chip select */
};
static struct spi_board_info streetracer_spi_board_info[] __initdata = {
......
......@@ -347,7 +347,7 @@ static struct pxa2xx_spi_controller pxa_ssp_master_2_info = {
};
/* An upcoming kernel change will scrap SFRM usage so these
* drivers have been moved to use gpio's via cs_control */
* drivers have been moved to use GPIOs */
static struct pxa2xx_spi_chip staccel_chip_info = {
.tx_threshold = 8,
.rx_threshold = 8,
......
......@@ -427,7 +427,6 @@ static void lpss_ssp_cs_control(struct spi_device *spi, bool enable)
static void cs_assert(struct spi_device *spi)
{
struct chip_data *chip = spi_get_ctldata(spi);
struct driver_data *drv_data =
spi_controller_get_devdata(spi->controller);
......@@ -436,18 +435,12 @@ static void cs_assert(struct spi_device *spi)
return;
}
if (chip->cs_control) {
chip->cs_control(PXA2XX_CS_ASSERT);
return;
}
if (is_lpss_ssp(drv_data))
lpss_ssp_cs_control(spi, true);
}
static void cs_deassert(struct spi_device *spi)
{
struct chip_data *chip = spi_get_ctldata(spi);
struct driver_data *drv_data =
spi_controller_get_devdata(spi->controller);
unsigned long timeout;
......@@ -461,11 +454,6 @@ static void cs_deassert(struct spi_device *spi)
!time_after(jiffies, timeout))
cpu_relax();
if (chip->cs_control) {
chip->cs_control(PXA2XX_CS_DEASSERT);
return;
}
if (is_lpss_ssp(drv_data))
lpss_ssp_cs_control(spi, false);
}
......@@ -1204,12 +1192,6 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
*/
cleanup_cs(spi);
/* If ->cs_control() is provided, ignore GPIO chip select */
if (chip_info->cs_control) {
chip->cs_control = chip_info->cs_control;
return 0;
}
if (gpio_is_valid(chip_info->gpio_cs)) {
int gpio = chip_info->gpio_cs;
int err;
......
......@@ -49,7 +49,6 @@ struct driver_data {
int (*write)(struct driver_data *drv_data);
int (*read)(struct driver_data *drv_data);
irqreturn_t (*transfer_handler)(struct driver_data *drv_data);
void (*cs_control)(u32 command);
void __iomem *lpss_base;
......@@ -67,8 +66,6 @@ struct chip_data {
u32 threshold;
u16 lpss_rx_threshold;
u16 lpss_tx_threshold;
void (*cs_control)(u32 command);
};
static inline u32 pxa2xx_spi_read(const struct driver_data *drv_data, u32 reg)
......
......@@ -9,9 +9,6 @@
#include <linux/pxa2xx_ssp.h>
#define PXA2XX_CS_ASSERT (0x01)
#define PXA2XX_CS_DEASSERT (0x02)
struct dma_chan;
/*
......@@ -47,7 +44,6 @@ struct pxa2xx_spi_chip {
u32 timeout;
u8 enable_loopback;
int gpio_cs;
void (*cs_control)(u32 command);
};
#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment