Commit a9df22c0 authored by Hans de Goede's avatar Hans de Goede Committed by Sebastian Reichel

power: supply: max17042_battery: Add support for the STATUS property

Userspace prefers the driver having a status property over having to guess
itself. Specifically this will properly make the GNOME3 UI (and likely
others) properly show discharging / charging / full status, instead
of always showing discharging as status.

Note that in the case there is no charger driver supplying the max17042,
then a status of unknown will get returned. At least upower treats
this the same as not having a status attribute, so in this case nothing
changes from a userspace pov.
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Reviewed-by: default avatarKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
parent 91736213
......@@ -76,6 +76,7 @@ struct max17042_chip {
};
static enum power_supply_property max17042_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
POWER_SUPPLY_PROP_PRESENT,
POWER_SUPPLY_PROP_CYCLE_COUNT,
POWER_SUPPLY_PROP_VOLTAGE_MAX,
......@@ -113,6 +114,46 @@ static int max17042_get_temperature(struct max17042_chip *chip, int *temp)
return 0;
}
static int max17042_get_status(struct max17042_chip *chip, int *status)
{
int ret, charge_full, charge_now;
ret = power_supply_am_i_supplied(chip->battery);
if (ret < 0) {
*status = POWER_SUPPLY_STATUS_UNKNOWN;
return 0;
}
if (ret == 0) {
*status = POWER_SUPPLY_STATUS_DISCHARGING;
return 0;
}
/*
* The MAX170xx has builtin end-of-charge detection and will update
* FullCAP to match RepCap when it detects end of charging.
*
* When this cycle the battery gets charged to a higher (calculated)
* capacity then the previous cycle then FullCAP will get updated
* contineously once end-of-charge detection kicks in, so allow the
* 2 to differ a bit.
*/
ret = regmap_read(chip->regmap, MAX17042_FullCAP, &charge_full);
if (ret < 0)
return ret;
ret = regmap_read(chip->regmap, MAX17042_RepCap, &charge_now);
if (ret < 0)
return ret;
if ((charge_full - charge_now) <= MAX17042_FULL_THRESHOLD)
*status = POWER_SUPPLY_STATUS_FULL;
else
*status = POWER_SUPPLY_STATUS_CHARGING;
return 0;
}
static int max17042_get_battery_health(struct max17042_chip *chip, int *health)
{
int temp, vavg, vbatt, ret;
......@@ -182,6 +223,11 @@ static int max17042_get_property(struct power_supply *psy,
return -EAGAIN;
switch (psp) {
case POWER_SUPPLY_PROP_STATUS:
ret = max17042_get_status(chip, &val->intval);
if (ret < 0)
return ret;
break;
case POWER_SUPPLY_PROP_PRESENT:
ret = regmap_read(map, MAX17042_STATUS, &data);
if (ret < 0)
......
......@@ -31,6 +31,9 @@
#define MAX17042_DEFAULT_TEMP_MIN (0) /* For sys without temp sensor */
#define MAX17042_DEFAULT_TEMP_MAX (700) /* 70 degrees Celcius */
/* Consider RepCap which is less then 10 units below FullCAP full */
#define MAX17042_FULL_THRESHOLD 10
#define MAX17042_CHARACTERIZATION_DATA_SIZE 48
enum max17042_register {
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment