Commit aa3ae6de authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc

Pull powerpc fixes from Ben Herrenschmidt:
 "Here are a few more fixes for powerpc 3.10.  It's a bit more than I
  would have liked this late in the game but I suppose that's what
  happens with a brand new chip generation coming out.

  A few regression fixes, some last minute fixes for new P8 features
  such as transactional memory,...

  There's also one powerpc KVM patch that I requested that adds two
  missing functions to our in-kernel interrupt controller support which
  is itself a new 3.10 feature.  These are defined by the base
  hypervisor specification.  We didn't implement them originally because
  Linux doesn't use them but they are simple and I'm not comfortable
  having a half-implemented interface in 3.10 and having to deal with
  versionning etc...  later when something starts needing those calls.
  They cannot be emulated in qemu when using in-kernel interrupt
  controller (not enough shared state).

  Just added a last minute patch to fix a typo introducing a breakage in
  our cputable for Power7+ processors, sorry about that, but the
  regression it fixes just hurt me :-)"

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc/cputable: Fix typo on P7+ cputable entry
  powerpc/perf: Add missing SIER support
  powerpc/perf: Revert to original NO_SIPR logic
  powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges
  powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges
  powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP
  powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation
  powerpc/32bit:Store temporary result in r0 instead of r8
  powerpc/mm: Always invalidate tlb on hpte invalidate and update
  powerpc/pseries: Improve stream generation comments in copypage/user
  powerpc/pseries: Kill all prefetch streams on context switch
  powerpc/cputable: Fix oprofile_cpu_type on power8
  powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU
  powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions
  powerpc/tm: Move TM abort cause codes to uapi
  powerpc/tm: Abort on emulation and alignment faults
  powerpc/tm: Update cause codes documentation
  powerpc/tm: Make room for hypervisor in abort cause codes
parents 008bd2de badec11b
......@@ -147,6 +147,25 @@ Example signal handler:
fix_the_problem(ucp->dar);
}
When in an active transaction that takes a signal, we need to be careful with
the stack. It's possible that the stack has moved back up after the tbegin.
The obvious case here is when the tbegin is called inside a function that
returns before a tend. In this case, the stack is part of the checkpointed
transactional memory state. If we write over this non transactionally or in
suspend, we are in trouble because if we get a tm abort, the program counter and
stack pointer will be back at the tbegin but our in memory stack won't be valid
anymore.
To avoid this, when taking a signal in an active transaction, we need to use
the stack pointer from the checkpointed state, rather than the speculated
state. This ensures that the signal context (written tm suspended) will be
written below the stack required for the rollback. The transaction is aborted
becuase of the treclaim, so any memory written between the tbegin and the
signal will be rolled back anyway.
For signals taken in non-TM or suspended mode, we use the
normal/non-checkpointed stack pointer.
Failure cause codes used by kernel
==================================
......@@ -155,14 +174,18 @@ These are defined in <asm/reg.h>, and distinguish different reasons why the
kernel aborted a transaction:
TM_CAUSE_RESCHED Thread was rescheduled.
TM_CAUSE_TLBI Software TLB invalide.
TM_CAUSE_FAC_UNAV FP/VEC/VSX unavailable trap.
TM_CAUSE_SYSCALL Currently unused; future syscalls that must abort
transactions for consistency will use this.
TM_CAUSE_SIGNAL Signal delivered.
TM_CAUSE_MISC Currently unused.
TM_CAUSE_ALIGNMENT Alignment fault.
TM_CAUSE_EMULATE Emulation that touched memory.
These can be checked by the user program's abort handler as TEXASR[0:7].
These can be checked by the user program's abort handler as TEXASR[0:7]. If
bit 7 is set, it indicates that the error is consider persistent. For example
a TM_CAUSE_ALIGNMENT will be persistent while a TM_CAUSE_RESCHED will not.q
GDB
===
......
......@@ -264,6 +264,7 @@
#define H_GET_MPP 0x2D4
#define H_HOME_NODE_ASSOCIATIVITY 0x2EC
#define H_BEST_ENERGY 0x2F4
#define H_XIRR_X 0x2FC
#define H_RANDOM 0x300
#define H_COP 0x304
#define H_GET_MPP_X 0x314
......
......@@ -523,6 +523,17 @@ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,946)
#define PPC440EP_ERR42
#endif
/* The following stops all load and store data streams associated with stream
* ID (ie. streams created explicitly). The embedded and server mnemonics for
* dcbt are different so we use machine "power4" here explicitly.
*/
#define DCBT_STOP_ALL_STREAM_IDS(scratch) \
.machine push ; \
.machine "power4" ; \
lis scratch,0x60000000@h; \
dcbt r0,scratch,0b01010; \
.machine pop
/*
* toreal/fromreal/tophys/tovirt macros. 32-bit BookE makes them
* keep the address intact to be compatible with code shared with
......
......@@ -409,21 +409,16 @@ static inline void prefetchw(const void *x)
#endif
#ifdef CONFIG_PPC64
static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
static inline unsigned long get_clean_sp(unsigned long sp, int is_32)
{
unsigned long sp;
if (is_32)
sp = regs->gpr[1] & 0x0ffffffffUL;
else
sp = regs->gpr[1];
return sp & 0x0ffffffffUL;
return sp;
}
#else
static inline unsigned long get_clean_sp(struct pt_regs *regs, int is_32)
static inline unsigned long get_clean_sp(unsigned long sp, int is_32)
{
return regs->gpr[1];
return sp;
}
#endif
......
......@@ -111,17 +111,6 @@
#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T)
#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S)
/* Reason codes describing kernel causes for transaction aborts. By
convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if
the failure is persistent.
*/
#define TM_CAUSE_RESCHED 0xfe
#define TM_CAUSE_TLBI 0xfc
#define TM_CAUSE_FAC_UNAV 0xfa
#define TM_CAUSE_SYSCALL 0xf9 /* Persistent */
#define TM_CAUSE_MISC 0xf6
#define TM_CAUSE_SIGNAL 0xf4
#if defined(CONFIG_PPC_BOOK3S_64)
#define MSR_64BIT MSR_SF
......
......@@ -3,5 +3,8 @@
#define __ARCH_HAS_SA_RESTORER
#include <uapi/asm/signal.h>
#include <uapi/asm/ptrace.h>
extern unsigned long get_tm_stackpointer(struct pt_regs *regs);
#endif /* _ASM_POWERPC_SIGNAL_H */
......@@ -5,6 +5,8 @@
* Copyright 2012 Matt Evans & Michael Neuling, IBM Corporation.
*/
#include <uapi/asm/tm.h>
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
extern void do_load_up_transact_fpu(struct thread_struct *thread);
extern void do_load_up_transact_altivec(struct thread_struct *thread);
......
......@@ -40,6 +40,7 @@ header-y += statfs.h
header-y += swab.h
header-y += termbits.h
header-y += termios.h
header-y += tm.h
header-y += types.h
header-y += ucontext.h
header-y += unistd.h
#ifndef _ASM_POWERPC_TM_H
#define _ASM_POWERPC_TM_H
/* Reason codes describing kernel causes for transaction aborts. By
* convention, bit0 is copied to TEXASR[56] (IBM bit 7) which is set if
* the failure is persistent. PAPR saves 0xff-0xe0 for the hypervisor.
*/
#define TM_CAUSE_PERSISTENT 0x01
#define TM_CAUSE_RESCHED 0xde
#define TM_CAUSE_TLBI 0xdc
#define TM_CAUSE_FAC_UNAV 0xda
#define TM_CAUSE_SYSCALL 0xd8 /* future use */
#define TM_CAUSE_MISC 0xd6 /* future use */
#define TM_CAUSE_SIGNAL 0xd4
#define TM_CAUSE_ALIGNMENT 0xd2
#define TM_CAUSE_EMULATE 0xd0
#endif
......@@ -453,7 +453,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.oprofile_type = PPC_OPROFILE_POWER4,
.oprofile_cpu_type = "ppc64/ibm-compat-v1",
.oprofile_cpu_type = 0,
.cpu_setup = __setup_cpu_power8,
.cpu_restore = __restore_cpu_power8,
.platform = "power8",
......@@ -482,7 +482,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER7+ (raw)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
.cpu_user_features = COMMON_USER2_POWER7,
.cpu_user_features2 = COMMON_USER2_POWER7,
.mmu_features = MMU_FTRS_POWER7,
.icache_bsize = 128,
.dcache_bsize = 128,
......@@ -506,7 +506,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.dcache_bsize = 128,
.num_pmcs = 6,
.pmc_type = PPC_PMC_IBM,
.oprofile_cpu_type = "ppc64/power8",
.oprofile_cpu_type = 0,
.oprofile_type = PPC_OPROFILE_POWER4,
.cpu_setup = __setup_cpu_power8,
.cpu_restore = __restore_cpu_power8,
......
......@@ -849,7 +849,7 @@ resume_kernel:
/* check current_thread_info, _TIF_EMULATE_STACK_STORE */
CURRENT_THREAD_INFO(r9, r1)
lwz r8,TI_FLAGS(r9)
andis. r8,r8,_TIF_EMULATE_STACK_STORE@h
andis. r0,r8,_TIF_EMULATE_STACK_STORE@h
beq+ 1f
addi r8,r1,INT_FRAME_SIZE /* Get the kprobed function entry */
......
......@@ -501,6 +501,13 @@ BEGIN_FTR_SECTION
ldarx r6,0,r1
END_FTR_SECTION_IFSET(CPU_FTR_STCX_CHECKS_ADDRESS)
#ifdef CONFIG_PPC_BOOK3S
/* Cancel all explict user streams as they will have no use after context
* switch and will stop the HW from creating streams itself
*/
DCBT_STOP_ALL_STREAM_IDS(r6)
#endif
addi r6,r4,-THREAD /* Convert THREAD to 'current' */
std r6,PACACURRENT(r13) /* Set new 'current' */
......
......@@ -657,15 +657,6 @@ void pci_resource_to_user(const struct pci_dev *dev, int bar,
* ranges. However, some machines (thanks Apple !) tend to split their
* space into lots of small contiguous ranges. So we have to coalesce.
*
* - We can only cope with all memory ranges having the same offset
* between CPU addresses and PCI addresses. Unfortunately, some bridges
* are setup for a large 1:1 mapping along with a small "window" which
* maps PCI address 0 to some arbitrary high address of the CPU space in
* order to give access to the ISA memory hole.
* The way out of here that I've chosen for now is to always set the
* offset based on the first resource found, then override it if we
* have a different offset and the previous was set by an ISA hole.
*
* - Some busses have IO space not starting at 0, which causes trouble with
* the way we do our IO resource renumbering. The code somewhat deals with
* it for 64 bits but I would expect problems on 32 bits.
......@@ -680,10 +671,9 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
int rlen;
int pna = of_n_addr_cells(dev);
int np = pna + 5;
int memno = 0, isa_hole = -1;
int memno = 0;
u32 pci_space;
unsigned long long pci_addr, cpu_addr, pci_next, cpu_next, size;
unsigned long long isa_mb = 0;
struct resource *res;
printk(KERN_INFO "PCI host bridge %s %s ranges:\n",
......@@ -777,8 +767,6 @@ void pci_process_bridge_OF_ranges(struct pci_controller *hose,
}
/* Handles ISA memory hole space here */
if (pci_addr == 0) {
isa_mb = cpu_addr;
isa_hole = memno;
if (primary || isa_mem_base == 0)
isa_mem_base = cpu_addr;
hose->isa_mem_phys = cpu_addr;
......
......@@ -18,6 +18,7 @@
#include <asm/uaccess.h>
#include <asm/unistd.h>
#include <asm/debug.h>
#include <asm/tm.h>
#include "signal.h"
......@@ -30,13 +31,13 @@ int show_unhandled_signals = 1;
/*
* Allocate space for the signal frame
*/
void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp,
size_t frame_size, int is_32)
{
unsigned long oldsp, newsp;
/* Default to using normal stack */
oldsp = get_clean_sp(regs, is_32);
oldsp = get_clean_sp(sp, is_32);
/* Check for alt stack */
if ((ka->sa.sa_flags & SA_ONSTACK) &&
......@@ -175,3 +176,38 @@ void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
user_enter();
}
unsigned long get_tm_stackpointer(struct pt_regs *regs)
{
/* When in an active transaction that takes a signal, we need to be
* careful with the stack. It's possible that the stack has moved back
* up after the tbegin. The obvious case here is when the tbegin is
* called inside a function that returns before a tend. In this case,
* the stack is part of the checkpointed transactional memory state.
* If we write over this non transactionally or in suspend, we are in
* trouble because if we get a tm abort, the program counter and stack
* pointer will be back at the tbegin but our in memory stack won't be
* valid anymore.
*
* To avoid this, when taking a signal in an active transaction, we
* need to use the stack pointer from the checkpointed state, rather
* than the speculated state. This ensures that the signal context
* (written tm suspended) will be written below the stack required for
* the rollback. The transaction is aborted becuase of the treclaim,
* so any memory written between the tbegin and the signal will be
* rolled back anyway.
*
* For signals taken in non-TM or suspended mode, we use the
* normal/non-checkpointed stack pointer.
*/
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
if (MSR_TM_ACTIVE(regs->msr)) {
tm_enable();
tm_reclaim(&current->thread, regs->msr, TM_CAUSE_SIGNAL);
if (MSR_TM_TRANSACTIONAL(regs->msr))
return current->thread.ckpt_regs.gpr[1];
}
#endif
return regs->gpr[1];
}
......@@ -12,7 +12,7 @@
extern void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags);
extern void __user * get_sigframe(struct k_sigaction *ka, struct pt_regs *regs,
extern void __user * get_sigframe(struct k_sigaction *ka, unsigned long sp,
size_t frame_size, int is_32);
extern int handle_signal32(unsigned long sig, struct k_sigaction *ka,
......
......@@ -503,12 +503,6 @@ static int save_tm_user_regs(struct pt_regs *regs,
{
unsigned long msr = regs->msr;
/* tm_reclaim rolls back all reg states, updating thread.ckpt_regs,
* thread.transact_fpr[], thread.transact_vr[], etc.
*/
tm_enable();
tm_reclaim(&current->thread, msr, TM_CAUSE_SIGNAL);
/* Make sure floating point registers are stored in regs */
flush_fp_to_thread(current);
......@@ -965,7 +959,7 @@ int handle_rt_signal32(unsigned long sig, struct k_sigaction *ka,
/* Set up Signal Frame */
/* Put a Real Time Context onto stack */
rt_sf = get_sigframe(ka, regs, sizeof(*rt_sf), 1);
rt_sf = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*rt_sf), 1);
addr = rt_sf;
if (unlikely(rt_sf == NULL))
goto badframe;
......@@ -1403,7 +1397,7 @@ int handle_signal32(unsigned long sig, struct k_sigaction *ka,
unsigned long tramp;
/* Set up Signal Frame */
frame = get_sigframe(ka, regs, sizeof(*frame), 1);
frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 1);
if (unlikely(frame == NULL))
goto badframe;
sc = (struct sigcontext __user *) &frame->sctx;
......
......@@ -154,11 +154,12 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs,
* As above, but Transactional Memory is in use, so deliver sigcontexts
* containing checkpointed and transactional register states.
*
* To do this, we treclaim to gather both sets of registers and set up the
* 'normal' sigcontext registers with rolled-back register values such that a
* simple signal handler sees a correct checkpointed register state.
* If interested, a TM-aware sighandler can examine the transactional registers
* in the 2nd sigcontext to determine the real origin of the signal.
* To do this, we treclaim (done before entering here) to gather both sets of
* registers and set up the 'normal' sigcontext registers with rolled-back
* register values such that a simple signal handler sees a correct
* checkpointed register state. If interested, a TM-aware sighandler can
* examine the transactional registers in the 2nd sigcontext to determine the
* real origin of the signal.
*/
static long setup_tm_sigcontexts(struct sigcontext __user *sc,
struct sigcontext __user *tm_sc,
......@@ -184,16 +185,6 @@ static long setup_tm_sigcontexts(struct sigcontext __user *sc,
BUG_ON(!MSR_TM_ACTIVE(regs->msr));
/* tm_reclaim rolls back all reg states, saving checkpointed (older)
* GPRs to thread.ckpt_regs and (if used) FPRs to (newer)
* thread.transact_fp and/or VRs to (newer) thread.transact_vr.
* THEN we save out FP/VRs, if necessary, to the checkpointed (older)
* thread.fr[]/vr[]s. The transactional (newer) GPRs are on the
* stack, in *regs.
*/
tm_enable();
tm_reclaim(&current->thread, msr, TM_CAUSE_SIGNAL);
flush_fp_to_thread(current);
#ifdef CONFIG_ALTIVEC
......@@ -711,7 +702,7 @@ int handle_rt_signal64(int signr, struct k_sigaction *ka, siginfo_t *info,
unsigned long newsp = 0;
long err = 0;
frame = get_sigframe(ka, regs, sizeof(*frame), 0);
frame = get_sigframe(ka, get_tm_stackpointer(regs), sizeof(*frame), 0);
if (unlikely(frame == NULL))
goto badframe;
......
......@@ -53,6 +53,7 @@
#ifdef CONFIG_PPC64
#include <asm/firmware.h>
#include <asm/processor.h>
#include <asm/tm.h>
#endif
#include <asm/kexec.h>
#include <asm/ppc-opcode.h>
......@@ -932,6 +933,28 @@ static int emulate_isel(struct pt_regs *regs, u32 instword)
return 0;
}
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
static inline bool tm_abort_check(struct pt_regs *regs, int cause)
{
/* If we're emulating a load/store in an active transaction, we cannot
* emulate it as the kernel operates in transaction suspended context.
* We need to abort the transaction. This creates a persistent TM
* abort so tell the user what caused it with a new code.
*/
if (MSR_TM_TRANSACTIONAL(regs->msr)) {
tm_enable();
tm_abort(cause);
return true;
}
return false;
}
#else
static inline bool tm_abort_check(struct pt_regs *regs, int reason)
{
return false;
}
#endif
static int emulate_instruction(struct pt_regs *regs)
{
u32 instword;
......@@ -971,6 +994,9 @@ static int emulate_instruction(struct pt_regs *regs)
/* Emulate load/store string insn. */
if ((instword & PPC_INST_STRING_GEN_MASK) == PPC_INST_STRING) {
if (tm_abort_check(regs,
TM_CAUSE_EMULATE | TM_CAUSE_PERSISTENT))
return -EINVAL;
PPC_WARN_EMULATED(string, regs);
return emulate_string_inst(regs, instword);
}
......@@ -1148,6 +1174,9 @@ void alignment_exception(struct pt_regs *regs)
if (!arch_irq_disabled_regs(regs))
local_irq_enable();
if (tm_abort_check(regs, TM_CAUSE_ALIGNMENT | TM_CAUSE_PERSISTENT))
goto bail;
/* we don't implement logging of alignment exceptions */
if (!(current->thread.align_ctl & PR_UNALIGN_SIGBUS))
fixed = fix_alignment(regs);
......
......@@ -562,6 +562,8 @@ int kvmppc_pseries_do_hcall(struct kvm_vcpu *vcpu)
case H_CPPR:
case H_EOI:
case H_IPI:
case H_IPOLL:
case H_XIRR_X:
if (kvmppc_xics_enabled(vcpu)) {
ret = kvmppc_xics_hcall(vcpu, req);
break;
......
......@@ -257,6 +257,8 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd)
case H_CPPR:
case H_EOI:
case H_IPI:
case H_IPOLL:
case H_XIRR_X:
if (kvmppc_xics_enabled(vcpu))
return kvmppc_h_pr_xics_hcall(vcpu, cmd);
break;
......
......@@ -650,6 +650,23 @@ static noinline int kvmppc_h_ipi(struct kvm_vcpu *vcpu, unsigned long server,
return H_SUCCESS;
}
static int kvmppc_h_ipoll(struct kvm_vcpu *vcpu, unsigned long server)
{
union kvmppc_icp_state state;
struct kvmppc_icp *icp;
icp = vcpu->arch.icp;
if (icp->server_num != server) {
icp = kvmppc_xics_find_server(vcpu->kvm, server);
if (!icp)
return H_PARAMETER;
}
state = ACCESS_ONCE(icp->state);
kvmppc_set_gpr(vcpu, 4, ((u32)state.cppr << 24) | state.xisr);
kvmppc_set_gpr(vcpu, 5, state.mfrr);
return H_SUCCESS;
}
static noinline void kvmppc_h_cppr(struct kvm_vcpu *vcpu, unsigned long cppr)
{
union kvmppc_icp_state old_state, new_state;
......@@ -787,6 +804,18 @@ int kvmppc_xics_hcall(struct kvm_vcpu *vcpu, u32 req)
if (!xics || !vcpu->arch.icp)
return H_HARDWARE;
/* These requests don't have real-mode implementations at present */
switch (req) {
case H_XIRR_X:
res = kvmppc_h_xirr(vcpu);
kvmppc_set_gpr(vcpu, 4, res);
kvmppc_set_gpr(vcpu, 5, get_tb());
return rc;
case H_IPOLL:
rc = kvmppc_h_ipoll(vcpu, kvmppc_get_gpr(vcpu, 4));
return rc;
}
/* Check for real mode returning too hard */
if (xics->real_mode)
return kvmppc_xics_rm_complete(vcpu, req);
......
......@@ -28,13 +28,14 @@ _GLOBAL(copypage_power7)
* aligned we don't need to clear the bottom 7 bits of either
* address.
*/
ori r9,r3,1 /* stream=1 */
ori r9,r3,1 /* stream=1 => to */
#ifdef CONFIG_PPC_64K_PAGES
lis r7,0x0E01 /* depth=7, units=512 */
lis r7,0x0E01 /* depth=7
* units/cachelines=512 */
#else
lis r7,0x0E00 /* depth=7 */
ori r7,r7,0x1000 /* units=32 */
ori r7,r7,0x1000 /* units/cachelines=32 */
#endif
ori r10,r7,1 /* stream=1 */
......@@ -43,12 +44,14 @@ _GLOBAL(copypage_power7)
.machine push
.machine "power4"
dcbt r0,r4,0b01000
dcbt r0,r7,0b01010
dcbtst r0,r9,0b01000
dcbtst r0,r10,0b01010
/* setup read stream 0 */
dcbt r0,r4,0b01000 /* addr from */
dcbt r0,r7,0b01010 /* length and depth from */
/* setup write stream 1 */
dcbtst r0,r9,0b01000 /* addr to */
dcbtst r0,r10,0b01010 /* length and depth to */
eieio
dcbt r0,r8,0b01010 /* GO */
dcbt r0,r8,0b01010 /* all streams GO */
.machine pop
#ifdef CONFIG_ALTIVEC
......
......@@ -318,12 +318,14 @@ err1; stb r0,0(r3)
.machine push
.machine "power4"
dcbt r0,r6,0b01000
dcbt r0,r7,0b01010
dcbtst r0,r9,0b01000
dcbtst r0,r10,0b01010
/* setup read stream 0 */
dcbt r0,r6,0b01000 /* addr from */
dcbt r0,r7,0b01010 /* length and depth from */
/* setup write stream 1 */
dcbtst r0,r9,0b01000 /* addr to */
dcbtst r0,r10,0b01010 /* length and depth to */
eieio
dcbt r0,r8,0b01010 /* GO */
dcbt r0,r8,0b01010 /* all streams GO */
.machine pop
beq cr1,.Lunwind_stack_nonvmx_copy
......
......@@ -336,11 +336,18 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
hpte_v = hptep->v;
actual_psize = hpte_actual_psize(hptep, psize);
/*
* We need to invalidate the TLB always because hpte_remove doesn't do
* a tlb invalidate. If a hash bucket gets full, we "evict" a more/less
* random entry from it. When we do that we don't invalidate the TLB
* (hpte_remove) because we assume the old translation is still
* technically "valid".
*/
if (actual_psize < 0) {
native_unlock_hpte(hptep);
return -1;
actual_psize = psize;
ret = -1;
goto err_out;
}
/* Even if we miss, we need to invalidate the TLB */
if (!HPTE_V_COMPARE(hpte_v, want_v)) {
DBG_LOW(" -> miss\n");
ret = -1;
......@@ -350,6 +357,7 @@ static long native_hpte_updatepp(unsigned long slot, unsigned long newpp,
hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
(newpp & (HPTE_R_PP | HPTE_R_N | HPTE_R_C));
}
err_out:
native_unlock_hpte(hptep);
/* Ensure it is out of the tlb too. */
......@@ -409,7 +417,7 @@ static void native_hpte_updateboltedpp(unsigned long newpp, unsigned long ea,
hptep = htab_address + slot;
actual_psize = hpte_actual_psize(hptep, psize);
if (actual_psize < 0)
return;
actual_psize = psize;
/* Update the HPTE */
hptep->r = (hptep->r & ~(HPTE_R_PP | HPTE_R_N)) |
......@@ -437,21 +445,27 @@ static void native_hpte_invalidate(unsigned long slot, unsigned long vpn,
hpte_v = hptep->v;
actual_psize = hpte_actual_psize(hptep, psize);
/*
* We need to invalidate the TLB always because hpte_remove doesn't do
* a tlb invalidate. If a hash bucket gets full, we "evict" a more/less
* random entry from it. When we do that we don't invalidate the TLB
* (hpte_remove) because we assume the old translation is still
* technically "valid".
*/
if (actual_psize < 0) {
actual_psize = psize;
native_unlock_hpte(hptep);
local_irq_restore(flags);
return;
goto err_out;
}
/* Even if we miss, we need to invalidate the TLB */
if (!HPTE_V_COMPARE(hpte_v, want_v))
native_unlock_hpte(hptep);
else
/* Invalidate the hpte. NOTE: this also unlocks it */
hptep->v = 0;
err_out:
/* Invalidate the TLB */
tlbie(vpn, psize, actual_psize, ssize, local);
local_irq_restore(flags);
}
......
......@@ -110,7 +110,7 @@ static inline void power_pmu_bhrb_read(struct cpu_hw_events *cpuhw) {}
static bool regs_use_siar(struct pt_regs *regs)
{
return !!(regs->result & 1);
return !!regs->result;
}
/*
......@@ -136,22 +136,30 @@ static inline unsigned long perf_ip_adjust(struct pt_regs *regs)
* If we're not doing instruction sampling, give them the SDAR
* (sampled data address). If we are doing instruction sampling, then
* only give them the SDAR if it corresponds to the instruction
* pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC or
* the [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA.
* pointed to by SIAR; this is indicated by the [POWER6_]MMCRA_SDSYNC, the
* [POWER7P_]MMCRA_SDAR_VALID bit in MMCRA, or the SDAR_VALID bit in SIER.
*/
static inline void perf_get_data_addr(struct pt_regs *regs, u64 *addrp)
{
unsigned long mmcra = regs->dsisr;
unsigned long sdsync;
bool sdar_valid;
if (ppmu->flags & PPMU_SIAR_VALID)
sdsync = POWER7P_MMCRA_SDAR_VALID;
else if (ppmu->flags & PPMU_ALT_SIPR)
sdsync = POWER6_MMCRA_SDSYNC;
else
sdsync = MMCRA_SDSYNC;
if (ppmu->flags & PPMU_HAS_SIER)
sdar_valid = regs->dar & SIER_SDAR_VALID;
else {
unsigned long sdsync;
if (ppmu->flags & PPMU_SIAR_VALID)
sdsync = POWER7P_MMCRA_SDAR_VALID;
else if (ppmu->flags & PPMU_ALT_SIPR)
sdsync = POWER6_MMCRA_SDSYNC;
else
sdsync = MMCRA_SDSYNC;
sdar_valid = mmcra & sdsync;
}
if (!(mmcra & MMCRA_SAMPLE_ENABLE) || (mmcra & sdsync))
if (!(mmcra & MMCRA_SAMPLE_ENABLE) || sdar_valid)
*addrp = mfspr(SPRN_SDAR);
}
......@@ -181,11 +189,6 @@ static bool regs_sipr(struct pt_regs *regs)
return !!(regs->dsisr & sipr);
}
static bool regs_no_sipr(struct pt_regs *regs)
{
return !!(regs->result & 2);
}
static inline u32 perf_flags_from_msr(struct pt_regs *regs)
{
if (regs->msr & MSR_PR)
......@@ -208,7 +211,7 @@ static inline u32 perf_get_misc_flags(struct pt_regs *regs)
* SIAR which should give slightly more reliable
* results
*/
if (regs_no_sipr(regs)) {
if (ppmu->flags & PPMU_NO_SIPR) {
unsigned long siar = mfspr(SPRN_SIAR);
if (siar >= PAGE_OFFSET)
return PERF_RECORD_MISC_KERNEL;
......@@ -239,22 +242,9 @@ static inline void perf_read_regs(struct pt_regs *regs)
int use_siar;
regs->dsisr = mmcra;
regs->result = 0;
if (ppmu->flags & PPMU_NO_SIPR)
regs->result |= 2;
/*
* On power8 if we're in random sampling mode, the SIER is updated.
* If we're in continuous sampling mode, we don't have SIPR.
*/
if (ppmu->flags & PPMU_HAS_SIER) {
if (marked)
regs->dar = mfspr(SPRN_SIER);
else
regs->result |= 2;
}
if (ppmu->flags & PPMU_HAS_SIER)
regs->dar = mfspr(SPRN_SIER);
/*
* If this isn't a PMU exception (eg a software event) the SIAR is
......@@ -279,12 +269,12 @@ static inline void perf_read_regs(struct pt_regs *regs)
use_siar = 1;
else if ((ppmu->flags & PPMU_NO_CONT_SAMPLING))
use_siar = 0;
else if (!regs_no_sipr(regs) && regs_sipr(regs))
else if (!(ppmu->flags & PPMU_NO_SIPR) && regs_sipr(regs))
use_siar = 0;
else
use_siar = 1;
regs->result |= use_siar;
regs->result = use_siar;
}
/*
......@@ -308,8 +298,13 @@ static inline int siar_valid(struct pt_regs *regs)
unsigned long mmcra = regs->dsisr;
int marked = mmcra & MMCRA_SAMPLE_ENABLE;
if ((ppmu->flags & PPMU_SIAR_VALID) && marked)
return mmcra & POWER7P_MMCRA_SIAR_VALID;
if (marked) {
if (ppmu->flags & PPMU_HAS_SIER)
return regs->dar & SIER_SIAR_VALID;
if (ppmu->flags & PPMU_SIAR_VALID)
return mmcra & POWER7P_MMCRA_SIAR_VALID;
}
return 1;
}
......
......@@ -19,6 +19,8 @@ config PPC_PSERIES
select ZLIB_DEFLATE
select PPC_DOORBELL
select HAVE_CONTEXT_TRACKING
select HOTPLUG if SMP
select HOTPLUG_CPU if SMP
default y
config PPC_SPLPAR
......
......@@ -54,7 +54,7 @@ static DEFINE_RAW_SPINLOCK(mpic_lock);
#ifdef CONFIG_PPC32 /* XXX for now */
#ifdef CONFIG_IRQ_ALL_CPUS
#define distribute_irqs (!(mpic->flags & MPIC_SINGLE_DEST_CPU))
#define distribute_irqs (1)
#else
#define distribute_irqs (0)
#endif
......@@ -1703,7 +1703,7 @@ void mpic_setup_this_cpu(void)
* it differently, then we should make sure we also change the default
* values of irq_desc[].affinity in irq.c.
*/
if (distribute_irqs) {
if (distribute_irqs && !(mpic->flags & MPIC_SINGLE_DEST_CPU)) {
for (i = 0; i < mpic->num_sources ; i++)
mpic_irq_write(i, MPIC_INFO(IRQ_DESTINATION),
mpic_irq_read(i, MPIC_INFO(IRQ_DESTINATION)) | msk);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment