Commit aa4734da authored by Linus Walleij's avatar Linus Walleij Committed by Vinod Koul

dmaengine: pl08x: support dt channel assignment

Add support for assigning DMA channels from a device tree.

[je: remove channel sub-node parsing, dynamic channel creation on xlate]
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: default avatarJoachim Eastwood <manabian@gmail.com>
Signed-off-by: default avatarVinod Koul <vinod.koul@intel.com>
parent 4a736d15
......@@ -83,6 +83,8 @@
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_dma.h>
#include <linux/pm_runtime.h>
#include <linux/seq_file.h>
#include <linux/slab.h>
......@@ -2030,10 +2032,188 @@ static inline void init_pl08x_debugfs(struct pl08x_driver_data *pl08x)
}
#endif
#ifdef CONFIG_OF
static struct dma_chan *pl08x_find_chan_id(struct pl08x_driver_data *pl08x,
u32 id)
{
struct pl08x_dma_chan *chan;
list_for_each_entry(chan, &pl08x->slave.channels, vc.chan.device_node) {
if (chan->signal == id)
return &chan->vc.chan;
}
return NULL;
}
static struct dma_chan *pl08x_of_xlate(struct of_phandle_args *dma_spec,
struct of_dma *ofdma)
{
struct pl08x_driver_data *pl08x = ofdma->of_dma_data;
struct pl08x_channel_data *data;
struct pl08x_dma_chan *chan;
struct dma_chan *dma_chan;
if (!pl08x)
return NULL;
if (dma_spec->args_count != 2)
return NULL;
dma_chan = pl08x_find_chan_id(pl08x, dma_spec->args[0]);
if (dma_chan)
return dma_get_slave_channel(dma_chan);
chan = devm_kzalloc(pl08x->slave.dev, sizeof(*chan) + sizeof(*data),
GFP_KERNEL);
if (!chan)
return NULL;
data = (void *)&chan[1];
data->bus_id = "(none)";
data->periph_buses = dma_spec->args[1];
chan->cd = data;
chan->host = pl08x;
chan->slave = true;
chan->name = data->bus_id;
chan->state = PL08X_CHAN_IDLE;
chan->signal = dma_spec->args[0];
chan->vc.desc_free = pl08x_desc_free;
vchan_init(&chan->vc, &pl08x->slave);
return dma_get_slave_channel(&chan->vc.chan);
}
static int pl08x_of_probe(struct amba_device *adev,
struct pl08x_driver_data *pl08x,
struct device_node *np)
{
struct pl08x_platform_data *pd;
u32 cctl_memcpy = 0;
u32 val;
int ret;
pd = devm_kzalloc(&adev->dev, sizeof(*pd), GFP_KERNEL);
if (!pd)
return -ENOMEM;
/* Eligible bus masters for fetching LLIs */
if (of_property_read_bool(np, "lli-bus-interface-ahb1"))
pd->lli_buses |= PL08X_AHB1;
if (of_property_read_bool(np, "lli-bus-interface-ahb2"))
pd->lli_buses |= PL08X_AHB2;
if (!pd->lli_buses) {
dev_info(&adev->dev, "no bus masters for LLIs stated, assume all\n");
pd->lli_buses |= PL08X_AHB1 | PL08X_AHB2;
}
/* Eligible bus masters for memory access */
if (of_property_read_bool(np, "mem-bus-interface-ahb1"))
pd->mem_buses |= PL08X_AHB1;
if (of_property_read_bool(np, "mem-bus-interface-ahb2"))
pd->mem_buses |= PL08X_AHB2;
if (!pd->mem_buses) {
dev_info(&adev->dev, "no bus masters for memory stated, assume all\n");
pd->mem_buses |= PL08X_AHB1 | PL08X_AHB2;
}
/* Parse the memcpy channel properties */
ret = of_property_read_u32(np, "memcpy-burst-size", &val);
if (ret) {
dev_info(&adev->dev, "no memcpy burst size specified, using 1 byte\n");
val = 1;
}
switch (val) {
default:
dev_err(&adev->dev, "illegal burst size for memcpy, set to 1\n");
/* Fall through */
case 1:
cctl_memcpy |= PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 4:
cctl_memcpy |= PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 8:
cctl_memcpy |= PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 16:
cctl_memcpy |= PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 32:
cctl_memcpy |= PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 64:
cctl_memcpy |= PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 128:
cctl_memcpy |= PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
case 256:
cctl_memcpy |= PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT |
PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT;
break;
}
ret = of_property_read_u32(np, "memcpy-bus-width", &val);
if (ret) {
dev_info(&adev->dev, "no memcpy bus width specified, using 8 bits\n");
val = 8;
}
switch (val) {
default:
dev_err(&adev->dev, "illegal bus width for memcpy, set to 8 bits\n");
/* Fall through */
case 8:
cctl_memcpy |= PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT |
PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT;
break;
case 16:
cctl_memcpy |= PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT |
PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT;
break;
case 32:
cctl_memcpy |= PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT |
PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT;
break;
}
/* This is currently the only thing making sense */
cctl_memcpy |= PL080_CONTROL_PROT_SYS;
/* Set up memcpy channel */
pd->memcpy_channel.bus_id = "memcpy";
pd->memcpy_channel.cctl_memcpy = cctl_memcpy;
/* Use the buses that can access memory, obviously */
pd->memcpy_channel.periph_buses = pd->mem_buses;
pl08x->pd = pd;
return of_dma_controller_register(adev->dev.of_node, pl08x_of_xlate,
pl08x);
}
#else
static inline int pl08x_of_probe(struct amba_device *adev,
struct pl08x_driver_data *pl08x,
struct device_node *np)
{
return -EINVAL;
}
#endif
static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
{
struct pl08x_driver_data *pl08x;
const struct vendor_data *vd = id->data;
struct device_node *np = adev->dev.of_node;
u32 tsfr_size;
int ret = 0;
int i;
......@@ -2093,9 +2273,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id)
/* Get the platform data */
pl08x->pd = dev_get_platdata(&adev->dev);
if (!pl08x->pd) {
dev_err(&adev->dev, "no platform data supplied\n");
ret = -EINVAL;
goto out_no_platdata;
if (np) {
ret = pl08x_of_probe(adev, pl08x, np);
if (ret)
goto out_no_platdata;
} else {
dev_err(&adev->dev, "no platform data supplied\n");
ret = -EINVAL;
goto out_no_platdata;
}
}
/* Assign useful pointers to the driver state */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment