Commit aa9a6801 authored by Kishon Vijay Abraham I's avatar Kishon Vijay Abraham I Committed by Ulf Hansson

mmc: host: omap_hsmmc: use mmc_host's vmmc and vqmmc

No functional change. Instead of using omap_hsmmc_host's vcc and vcc_aux
members, use vmmc and vqmmc present in mmc_host which is present
for the same purpose.
Signed-off-by: default avatarKishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: default avatarRoger Quadros <rogerq@ti.com>
Tested-by: default avatarTony Lindgren <tony@atomide.com>
Signed-off-by: default avatarUlf Hansson <ulf.hansson@linaro.org>
parent b49069fc
......@@ -181,15 +181,6 @@ struct omap_hsmmc_host {
struct mmc_data *data;
struct clk *fclk;
struct clk *dbclk;
/*
* vcc == configured supply
* vcc_aux == optional
* - MMC1, supply for DAT4..DAT7
* - MMC2/MMC2, external level shifter voltage supply, for
* chip (SDIO, eMMC, etc) or transceiver (MMC2 only)
*/
struct regulator *vcc;
struct regulator *vcc_aux;
struct regulator *pbias;
bool pbias_enabled;
void __iomem *base;
......@@ -259,6 +250,7 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_host *host =
platform_get_drvdata(to_platform_device(dev));
struct mmc_host *mmc = host->mmc;
int ret = 0;
if (mmc_pdata(host)->set_power)
......@@ -268,7 +260,7 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
* If we don't see a Vcc regulator, assume it's a fixed
* voltage always-on regulator.
*/
if (!host->vcc)
if (!mmc->supply.vmmc)
return 0;
if (mmc_pdata(host)->before_set_reg)
......@@ -297,23 +289,23 @@ static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
* chips/cards need an interface voltage rail too.
*/
if (power_on) {
if (host->vcc)
ret = mmc_regulator_set_ocr(host->mmc, host->vcc, vdd);
if (mmc->supply.vmmc)
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
/* Enable interface voltage rail, if needed */
if (ret == 0 && host->vcc_aux) {
ret = regulator_enable(host->vcc_aux);
if (ret < 0 && host->vcc)
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
if (ret == 0 && mmc->supply.vqmmc) {
ret = regulator_enable(mmc->supply.vqmmc);
if (ret < 0 && mmc->supply.vmmc)
ret = mmc_regulator_set_ocr(mmc,
mmc->supply.vmmc,
0);
}
} else {
/* Shut down the rail */
if (host->vcc_aux)
ret = regulator_disable(host->vcc_aux);
if (host->vcc) {
if (mmc->supply.vqmmc)
ret = regulator_disable(mmc->supply.vqmmc);
if (mmc->supply.vmmc) {
/* Then proceed to shut down the local regulator */
ret = mmc_regulator_set_ocr(host->mmc,
host->vcc, 0);
ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
}
}
......@@ -345,33 +337,34 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
{
int ocr_value = 0;
int ret;
struct mmc_host *mmc = host->mmc;
if (mmc_pdata(host)->set_power)
return 0;
host->vcc = devm_regulator_get_optional(host->dev, "vmmc");
if (IS_ERR(host->vcc)) {
ret = PTR_ERR(host->vcc);
mmc->supply.vmmc = devm_regulator_get_optional(host->dev, "vmmc");
if (IS_ERR(mmc->supply.vmmc)) {
ret = PTR_ERR(mmc->supply.vmmc);
if (ret != -ENODEV)
return ret;
dev_dbg(host->dev, "unable to get vmmc regulator %ld\n",
PTR_ERR(host->vcc));
host->vcc = NULL;
PTR_ERR(mmc->supply.vmmc));
mmc->supply.vmmc = NULL;
} else {
ocr_value = mmc_regulator_get_ocrmask(host->vcc);
ocr_value = mmc_regulator_get_ocrmask(mmc->supply.vmmc);
if (ocr_value > 0)
mmc_pdata(host)->ocr_mask = ocr_value;
}
/* Allow an aux regulator */
host->vcc_aux = devm_regulator_get_optional(host->dev, "vmmc_aux");
if (IS_ERR(host->vcc_aux)) {
ret = PTR_ERR(host->vcc_aux);
mmc->supply.vqmmc = devm_regulator_get_optional(host->dev, "vmmc_aux");
if (IS_ERR(mmc->supply.vqmmc)) {
ret = PTR_ERR(mmc->supply.vqmmc);
if (ret != -ENODEV)
return ret;
dev_dbg(host->dev, "unable to get vmmc_aux regulator %ld\n",
PTR_ERR(host->vcc_aux));
host->vcc_aux = NULL;
PTR_ERR(mmc->supply.vqmmc));
mmc->supply.vqmmc = NULL;
}
host->pbias = devm_regulator_get_optional(host->dev, "pbias");
......@@ -391,8 +384,8 @@ static int omap_hsmmc_reg_get(struct omap_hsmmc_host *host)
* To disable boot_on regulator, enable regulator
* to increase usecount and then disable it.
*/
if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
(host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
if ((mmc->supply.vmmc && regulator_is_enabled(mmc->supply.vmmc) > 0) ||
(mmc->supply.vqmmc && regulator_is_enabled(mmc->supply.vqmmc))) {
int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
omap_hsmmc_set_power(host->dev, 1, vdd);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment