Commit aaf7f809 authored by Randy Dunlap's avatar Randy Dunlap Committed by Neil Armstrong

drm/panel: re-alphabetize the menu list

A few of the DRM_PANEL entries have become out of alphabetical order,
so move them around a bit to restore alpha order.
Signed-off-by: default avatarRandy Dunlap <rdunlap@infradead.org>
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Jessica Zhang <quic_jesszhan@quicinc.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc:  <dri-devel@lists.freedesktop.org>
Cc: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240205062711.3513-1-rdunlap@infradead.orgSigned-off-by: default avatarNeil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240205062711.3513-1-rdunlap@infradead.org
parent c9424076
......@@ -87,53 +87,6 @@ config DRM_PANEL_BOE_TV101WUM_NL6
Say Y here if you want to support for BOE TV101WUM and AUO KD101N80
45NA WUXGA PANEL DSI Video Mode panel
config DRM_PANEL_DSI_CM
tristate "Generic DSI command mode panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
DRM panel driver for DSI command mode panels with support for
embedded and external backlights.
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
config DRM_PANEL_SIMPLE
tristate "support for simple panels (other than eDP ones)"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
depends on PM
select VIDEOMODE_HELPERS
help
DRM panel driver for dumb non-eDP panels that need at most a regulator
and a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
config DRM_PANEL_EDP
tristate "support for simple Embedded DisplayPort panels"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
depends on PM
select VIDEOMODE_HELPERS
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HELPER
select DRM_DP_AUX_BUS
select DRM_KMS_HELPER
help
DRM panel driver for dumb eDP panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
config DRM_PANEL_EBBG_FT8719
tristate "EBBG FT8719 panel driver"
depends on OF
......@@ -173,6 +126,25 @@ config DRM_PANEL_FEIYANG_FY07024DI26A30D
Say Y if you want to enable support for panels based on the
Feiyang FY07024DI26A30-D MIPI-DSI interface.
config DRM_PANEL_DSI_CM
tristate "Generic DSI command mode panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
DRM panel driver for DSI command mode panels with support for
embedded and external backlights.
config DRM_PANEL_LVDS
tristate "Generic LVDS panel driver"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
help
This driver supports LVDS panels that don't require device-specific
handling of power supplies or control signals. It implements automatic
backlight handling if the panel is attached to a backlight controller.
config DRM_PANEL_HIMAX_HX8394
tristate "HIMAX HX8394 MIPI-DSI LCD panels"
depends on OF
......@@ -262,17 +234,6 @@ config DRM_PANEL_JADARD_JD9365DA_H3
WXGA MIPI DSI panel. The panel support TFT dot matrix LCD with
800RGBx1280 dots at maximum.
config DRM_PANEL_JDI_LT070ME05000
tristate "JDI LT070ME05000 WUXGA DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for JDI DSI video mode
panel as found in Google Nexus 7 (2013) devices.
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
config DRM_PANEL_JDI_LPM102A188A
tristate "JDI LPM102A188A DSI panel"
depends on OF && GPIOLIB
......@@ -284,6 +245,17 @@ config DRM_PANEL_JDI_LPM102A188A
The panel has a 2560×1800 resolution. It provides a MIPI DSI interface
to the host.
config DRM_PANEL_JDI_LT070ME05000
tristate "JDI LT070ME05000 WUXGA DSI panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for JDI DSI video mode
panel as found in Google Nexus 7 (2013) devices.
The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
24 bit per pixel.
config DRM_PANEL_JDI_R63452
tristate "JDI R63452 Full HD DSI panel"
depends on OF
......@@ -337,12 +309,6 @@ config DRM_PANEL_LEADTEK_LTK500HD1829
24 bit RGB per pixel. It provides a MIPI DSI interface to
the host and has a built-in LED backlight.
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
config DRM_PANEL_LG_LB035Q02
tristate "LG LB035Q024573 RGB panel"
depends on GPIOLIB && OF && SPI
......@@ -370,6 +336,17 @@ config DRM_PANEL_MAGNACHIP_D53E6EA8966
with the Magnachip D53E6EA8966 panel IC. This panel receives
video data via DSI but commands via 9-bit SPI using DBI.
config DRM_PANEL_MANTIX_MLAF057WE51
tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Mantix
MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
has a resolution of 720x1440 pixels, a built in backlight and touch
controller.
config DRM_PANEL_NEC_NL8048HL11
tristate "NEC NL8048HL11 RGB panel"
depends on GPIOLIB && OF && SPI
......@@ -468,17 +445,6 @@ config DRM_PANEL_NOVATEK_NT39016
Say Y here if you want to enable support for the panels built
around the Novatek NT39016 display controller.
config DRM_PANEL_MANTIX_MLAF057WE51
tristate "Mantix MLAF057WE51-X MIPI-DSI LCD panel"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y here if you want to enable support for the Mantix
MLAF057WE51-X MIPI DSI panel as e.g. used in the Librem 5. It
has a resolution of 720x1440 pixels, a built in backlight and touch
controller.
config DRM_PANEL_OLIMEX_LCD_OLINUXINO
tristate "Olimex LCD-OLinuXino panel"
depends on OF
......@@ -573,6 +539,12 @@ config DRM_PANEL_RONBO_RB070D30
Say Y here if you want to enable support for Ronbo Electronics
RB070D30 1024x600 DSI panel.
config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_ATNA33XC20
tristate "Samsung ATNA33XC20 eDP panel"
depends on OF
......@@ -596,6 +568,12 @@ config DRM_PANEL_SAMSUNG_DB7430
DB7430 DPI display controller used in such devices as the
LMS397KF04 480x800 DPI panel.
config DRM_PANEL_SAMSUNG_LD9040
tristate "Samsung LD9040 RGB/SPI panel"
depends on OF && SPI
depends on BACKLIGHT_CLASS_DEVICE
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6D16D0
tristate "Samsung S6D16D0 DSI video mode panel"
depends on OF
......@@ -661,12 +639,6 @@ config DRM_PANEL_SAMSUNG_S6E63M0_DSI
Say Y here if you want to be able to access the Samsung
S6E63M0 panel using DSI.
config DRM_PANEL_SAMSUNG_S6E88A0_AMS452EF01
tristate "Samsung AMS452EF01 panel with S6E88A0 DSI video mode controller"
depends on OF
select DRM_MIPI_DSI
select VIDEOMODE_HELPERS
config DRM_PANEL_SAMSUNG_S6E8AA0
tristate "Samsung S6E8AA0 DSI video mode panel"
depends on OF
......@@ -765,15 +737,6 @@ config DRM_PANEL_SITRONIX_ST7789V
Say Y here if you want to enable support for the Sitronix
ST7789V controller for 240x320 LCD panels
config DRM_PANEL_SYNAPTICS_R63353
tristate "Synaptics R63353-based panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Synaptics R63353 controller.
config DRM_PANEL_SONY_ACX565AKM
tristate "Sony ACX565AKM panel"
depends on GPIOLIB && OF && SPI
......@@ -813,6 +776,43 @@ config DRM_PANEL_STARTEK_KD070FHFID015
with a resolution of 1024 x 600 pixels. It provides a MIPI DSI interface to
the host, a built-in LED backlight and touch controller.
config DRM_PANEL_EDP
tristate "support for simple Embedded DisplayPort panels"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
depends on PM
select VIDEOMODE_HELPERS
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HELPER
select DRM_DP_AUX_BUS
select DRM_KMS_HELPER
help
DRM panel driver for dumb eDP panels that need at most a regulator and
a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
config DRM_PANEL_SIMPLE
tristate "support for simple panels (other than eDP ones)"
depends on OF
depends on BACKLIGHT_CLASS_DEVICE
depends on PM
select VIDEOMODE_HELPERS
help
DRM panel driver for dumb non-eDP panels that need at most a regulator
and a GPIO to be powered up. Optionally a backlight can be attached so
that it can be automatically turned off when the panel goes into a
low power state.
config DRM_PANEL_SYNAPTICS_R63353
tristate "Synaptics R63353-based panels"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
help
Say Y if you want to enable support for panels based on the
Synaptics R63353 controller.
config DRM_PANEL_TDO_TL070WSH30
tristate "TDO TL070WSH30 DSI panel"
depends on OF
......@@ -856,6 +856,17 @@ config DRM_PANEL_TRULY_NT35597_WQXGA
Say Y here if you want to enable support for Truly NT35597 WQXGA Dual DSI
Video Mode panel
config DRM_PANEL_VISIONOX_R66451
tristate "Visionox R66451"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HELPER
help
Say Y here if you want to enable support for Visionox
R66451 1080x2340 AMOLED DSI panel.
config DRM_PANEL_VISIONOX_RM69299
tristate "Visionox RM69299"
depends on OF
......@@ -873,17 +884,6 @@ config DRM_PANEL_VISIONOX_VTDR6130
Say Y here if you want to enable support for Visionox
VTDR6130 1080x2400 AMOLED DSI panel.
config DRM_PANEL_VISIONOX_R66451
tristate "Visionox R66451"
depends on OF
depends on DRM_MIPI_DSI
depends on BACKLIGHT_CLASS_DEVICE
select DRM_DISPLAY_DP_HELPER
select DRM_DISPLAY_HELPER
help
Say Y here if you want to enable support for Visionox
R66451 1080x2340 AMOLED DSI panel.
config DRM_PANEL_WIDECHIPS_WS2401
tristate "Widechips WS2401 DPI panel driver"
depends on SPI && GPIOLIB
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment