Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: Avoid twl6040-codec PLL reconfiguration when not needed
  mfd: Store twl6040-codec mclk configuration

drivers/mfd/twl6040-core.c

@@ -282,6 +282,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 		/* Default PLL configuration after power up */
 		twl6040->pll = TWL6040_SYSCLK_SEL_LPPLL;
 		twl6040->sysclk = 19200000;
+		twl6040->mclk = 32768;
 	} else {
 		/* already powered-down */
 		if (!twl6040->power_count) {
@@ -305,6 +306,7 @@ int twl6040_power(struct twl6040 *twl6040, int on)
 			twl6040_power_down(twl6040);
 		}
 		twl6040->sysclk = 0;
+		twl6040->mclk = 0;
 	}
 
 out:
@@ -324,23 +326,38 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 	hppllctl = twl6040_reg_read(twl6040, TWL6040_REG_HPPLLCTL);
 	lppllctl = twl6040_reg_read(twl6040, TWL6040_REG_LPPLLCTL);
 
+	/* Force full reconfiguration when switching between PLL */
+	if (pll_id != twl6040->pll) {
+		twl6040->sysclk = 0;
+		twl6040->mclk = 0;
+	}
+
 	switch (pll_id) {
 	case TWL6040_SYSCLK_SEL_LPPLL:
 		/* low-power PLL divider */
-		switch (freq_out) {
-		case 17640000:
-			lppllctl |= TWL6040_LPLLFIN;
-			break;
-		case 19200000:
-			lppllctl &= ~TWL6040_LPLLFIN;
-			break;
-		default:
-			dev_err(twl6040->dev,
-				"freq_out %d not supported\n", freq_out);
-			ret = -EINVAL;
-			goto pll_out;
+		/* Change the sysclk configuration only if it has been canged */
+		if (twl6040->sysclk != freq_out) {
+			switch (freq_out) {
+			case 17640000:
+				lppllctl |= TWL6040_LPLLFIN;
+				break;
+			case 19200000:
+				lppllctl &= ~TWL6040_LPLLFIN;
+				break;
+			default:
+				dev_err(twl6040->dev,
+					"freq_out %d not supported\n",
+					freq_out);
+				ret = -EINVAL;
+				goto pll_out;
+			}
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
 		}
-		twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+
+		/* The PLL in use has not been change, we can exit */
+		if (twl6040->pll == pll_id)
+			break;
 
 		switch (freq_in) {
 		case 32768:
@@ -371,48 +388,56 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 			goto pll_out;
 		}
 
-		hppllctl &= ~TWL6040_MCLK_MSK;
+		if (twl6040->mclk != freq_in) {
+			hppllctl &= ~TWL6040_MCLK_MSK;
+
+			switch (freq_in) {
+			case 12000000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_12000KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			case 19200000:
+				/*
+				* PLL disabled
+				* (enable PLL if MCLK jitter quality
+				*  doesn't meet specification)
+				*/
+				hppllctl |= TWL6040_MCLK_19200KHZ;
+				break;
+			case 26000000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_26000KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			case 38400000:
+				/* PLL enabled, active mode */
+				hppllctl |= TWL6040_MCLK_38400KHZ |
+					    TWL6040_HPLLENA;
+				break;
+			default:
+				dev_err(twl6040->dev,
+					"freq_in %d not supported\n", freq_in);
+				ret = -EINVAL;
+				goto pll_out;
+			}
 
-		switch (freq_in) {
-		case 12000000:
-			/* PLL enabled, active mode */
-			hppllctl |= TWL6040_MCLK_12000KHZ |
-				    TWL6040_HPLLENA;
-			break;
-		case 19200000:
 			/*
-			 * PLL disabled
-			 * (enable PLL if MCLK jitter quality
-			 *  doesn't meet specification)
+			 * enable clock slicer to ensure input waveform is
+			 * square
 			 */
-			hppllctl |= TWL6040_MCLK_19200KHZ;
-			break;
-		case 26000000:
-			/* PLL enabled, active mode */
-			hppllctl |= TWL6040_MCLK_26000KHZ |
-				    TWL6040_HPLLENA;
-			break;
-		case 38400000:
-			/* PLL enabled, active mode */
-			hppllctl |= TWL6040_MCLK_38400KHZ |
-				    TWL6040_HPLLENA;
-			break;
-		default:
-			dev_err(twl6040->dev,
-				"freq_in %d not supported\n", freq_in);
-			ret = -EINVAL;
-			goto pll_out;
-		}
+			hppllctl |= TWL6040_HPLLSQRENA;
 
-		/* enable clock slicer to ensure input waveform is square */
-		hppllctl |= TWL6040_HPLLSQRENA;
-
-		twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL, hppllctl);
-		usleep_range(500, 700);
-		lppllctl |= TWL6040_HPLLSEL;
-		twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
-		lppllctl &= ~TWL6040_LPLLENA;
-		twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL, lppllctl);
+			twl6040_reg_write(twl6040, TWL6040_REG_HPPLLCTL,
+					  hppllctl);
+			usleep_range(500, 700);
+			lppllctl |= TWL6040_HPLLSEL;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+			lppllctl &= ~TWL6040_LPLLENA;
+			twl6040_reg_write(twl6040, TWL6040_REG_LPPLLCTL,
+					  lppllctl);
+		}
 		break;
 	default:
 		dev_err(twl6040->dev, "unknown pll id %d\n", pll_id);
@@ -421,6 +446,7 @@ int twl6040_set_pll(struct twl6040 *twl6040, int pll_id,
 	}
 
 	twl6040->sysclk = freq_out;
+	twl6040->mclk = freq_in;
 	twl6040->pll = pll_id;
 
 pll_out:

include/linux/mfd/twl6040.h

@@ -187,8 +187,10 @@ struct twl6040 {
 	int rev;
 	u8 vibra_ctrl_cache[2];
 
+	/* PLL configuration */
 	int pll;
 	unsigned int sysclk;
+	unsigned int mclk;
 
 	unsigned int irq;
 	unsigned int irq_base;