annotate chelsio

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/net/chelsio/common.h

@@ -379,7 +379,7 @@ extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config
 extern const struct board_info *t1_get_board_info(unsigned int board_id);
 extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid,
 						    unsigned short ssid);
-extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data);
+extern int t1_seeprom_read(adapter_t *adapter, u32 addr, __le32 *data);
 extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
 		     struct adapter_params *p);
 extern int t1_init_hw_modules(adapter_t *adapter);

drivers/net/chelsio/cxgb2.c

@@ -814,7 +814,7 @@ static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
 
 	e->magic = EEPROM_MAGIC(adapter);
 	for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32))
-		t1_seeprom_read(adapter, i, (u32 *)&buf[i]);
+		t1_seeprom_read(adapter, i, (__le32 *)&buf[i]);
 	memcpy(data, buf + e->offset, e->len);
 	return 0;
 }

drivers/net/chelsio/subr.c

@@ -563,10 +563,11 @@ struct chelsio_vpd_t {
  * written to the Control register. The hardware device will set the flag to a
  * one when 4B have been transferred to the Data register.
  */
-int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
+int t1_seeprom_read(adapter_t *adapter, u32 addr, __le32 *data)
 {
 	int i = EEPROM_MAX_POLL;
 	u16 val;
+	u32 v;
 
 	if (addr >= EEPROMSIZE || (addr & 3))
 		return -EINVAL;
@@ -582,8 +583,8 @@ int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
 		       adapter->name, addr);
 		return -EIO;
 	}
-	pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
-	*data = le32_to_cpu(*data);
+	pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, &v);
+	*data = cpu_to_le32(v);
 	return 0;
 }
 
@@ -593,7 +594,7 @@ static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
 
 	for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
 		ret = t1_seeprom_read(adapter, addr,
-				      (u32 *)((u8 *)vpd + addr));
+				      (__le32 *)((u8 *)vpd + addr));
 
 	return ret;
 }