Merge tag 'rtc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

Pull RTC updates from Alexandre Belloni:
 "Most of the changes are a rework of the cmos driver by Rafael and
  fixes for issues found using static checkers. The removal of a driver
  leads to a reduction of the number of LOC of the subsystem.

  Removed driver:
   - davinci

  Updates:
   - convert i2c drivers to .probe_new
   - fix spelling mistakes and duplicated words in comments
   - cmos: rework wake setup and ACPI event handling
   - cros-ec: Limit RTC alarm range to fix alarmtimer
   - ds1347: fix century register handling
   - efi: wakeup support
   - isl12022: temperature sensor support
   - pcf85063: fix read_alarm and clkout
   - pcf8523: use stop bit to detect invalid time
   - pcf8563: use RTC_FEATURE_ALARM
   - snvs: be more flexible on LPSRT reads
   - many static checker fixes"

* tag 'rtc-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (48 commits)
  rtc: ds1742: use devm_platform_get_and_ioremap_resource()
  rtc: mxc_v2: Add missing clk_disable_unprepare()
  rtc: rs5c313: correct some spelling mistakes
  rtc: at91rm9200: Fix syntax errors in comments
  rtc: remove duplicated words in comments
  rtc: rv3028: Use IRQ flags obtained from device tree if available
  rtc: ds1307: use sysfs_emit() to instead of scnprintf()
  rtc: isl12026: drop obsolete dependency on COMPILE_TEST
  dt-bindings: rtc: m41t80: Convert text schema to YAML one
  rtc: pcf85063: fix pcf85063_clkout_control
  rtc: rx6110: fix warning with !OF
  rtc: rk808: reduce 'struct rk808' usage
  rtc: msc313: Fix function prototype mismatch in msc313_rtc_probe()
  dt-bindings: rtc: convert rtc-meson.txt to dt-schema
  rtc: pic32: Move devm_rtc_allocate_device earlier in pic32_rtc_probe()
  rtc: st-lpc: Add missing clk_disable_unprepare in st_rtc_probe()
  rtc: pcf85063: Fix reading alarm
  rtc: pcf8523: fix for stop bit
  rtc: efi: Add wakeup support
  rtc: pcf8563: clear RTC_FEATURE_ALARM if no irq
  ...

Documentation/devicetree/bindings/rtc/amlogic,meson6-rtc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/amlogic,meson6-rtc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
+
+maintainers:
+  - Neil Armstrong <neil.armstrong@linaro.org>
+  - Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+
+allOf:
+  - $ref: rtc.yaml#
+  - $ref: /schemas/nvmem/nvmem.yaml#
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson6-rtc
+      - amlogic,meson8-rtc
+      - amlogic,meson8b-rtc
+      - amlogic,meson8m2-rtc
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    rtc: rtc@740 {
+        compatible = "amlogic,meson6-rtc";
+        reg = <0x740 0x14>;
+        interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
+        clocks = <&rtc32k_xtal>;
+        vdd-supply = <&rtc_vdd>;
+        resets = <&reset_rtc>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        mac@0 {
+            reg = <0 6>;
+        };
+    };

Documentation/devicetree/bindings/rtc/haoyu,hym8563.txt

-Haoyu Microelectronics HYM8563 Real Time Clock
-
-The HYM8563 provides basic rtc and alarm functionality
-as well as a clock output of up to 32kHz.
-
-Required properties:
-- compatible: should be: "haoyu,hym8563"
-- reg: i2c address
-- #clock-cells: the value should be 0
-
-Optional properties:
-- clock-output-names: From common clock binding
-- interrupts: rtc alarm/event interrupt
-
-Example:
-
-hym8563: hym8563@51 {
-	compatible = "haoyu,hym8563";
-	reg = <0x51>;
-
-	interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
-
-	#clock-cells = <0>;
-};
-
-device {
-...
-	clocks = <&hym8563>;
-...
-};

Documentation/devicetree/bindings/rtc/haoyu,hym8563.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/haoyu,hym8563.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Haoyu Microelectronics HYM8563 RTC
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    const: haoyu,hym8563
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    description: From common clock binding to override the default output clock name.
+    maxItems: 1
+
+  wakeup-source:
+    description: Enables wake up of host system on alarm.
+
+allOf:
+  - $ref: rtc.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - "#clock-cells"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        rtc@51 {
+            compatible = "haoyu,hym8563";
+            reg = <0x51>;
+            interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+            #clock-cells = <0>;
+        };
+    };

Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml

@@ -11,12 +11,16 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - qcom,pm8058-rtc
-      - qcom,pm8921-rtc
-      - qcom,pm8941-rtc
-      - qcom,pm8018-rtc
-      - qcom,pmk8350-rtc
+    oneOf:
+      - enum:
+          - qcom,pm8058-rtc
+          - qcom,pm8921-rtc
+          - qcom,pm8941-rtc
+          - qcom,pmk8350-rtc
+      - items:
+          - enum:
+              - qcom,pm8018-rtc
+          - const: qcom,pm8921-rtc
 
   reg:
     minItems: 1

Documentation/devicetree/bindings/rtc/rtc-m41t80.txt

-ST M41T80 family of RTC and compatible
-
-Required properties:
-- compatible: should be one of:
-	"st,m41t62",
-	"st,m41t65",
-	"st,m41t80",
-	"st,m41t81",
-	"st,m41t81s",
-	"st,m41t82",
-	"st,m41t83",
-	"st,m41t84",
-	"st,m41t85",
-	"st,m41t87",
-	"microcrystal,rv4162",
-- reg: I2C bus address of the device
-
-Optional properties:
-- interrupts: rtc alarm interrupt.
-- clock-output-names: From common clock binding to override the default output
-                      clock name
-- wakeup-source: Enables wake up of host system on alarm
-
-Optional child node:
-- clock: Provide this if the square wave pin is used as boot-enabled fixed clock.
-
-Example:
-	rtc@68 {
-		compatible = "st,m41t80";
-		reg = <0x68>;
-		interrupt-parent = <&UIC0>;
-		interrupts = <0x9 0x8>;
-
-		clock {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <32768>;
-		};
-	};

Documentation/devicetree/bindings/rtc/rtc-meson.txt

-* Amlogic Meson6, Meson8, Meson8b and Meson8m2 RTC
-
-Required properties:
-- compatible: should be one of the following describing the hardware:
-	* "amlogic,meson6-rtc"
-	* "amlogic,meson8-rtc"
-	* "amlogic,meson8b-rtc"
-	* "amlogic,meson8m2-rtc"
-
-- reg: physical register space for the controller's memory mapped registers.
-- interrupts: the interrupt line of the RTC block.
-- clocks: reference to the external 32.768kHz crystal oscillator.
-- vdd-supply: reference to the power supply of the RTC block.
-- resets: reset controller reference to allow reset of the controller
-
-Optional properties for the battery-backed non-volatile memory:
-- #address-cells: should be 1 to address the battery-backed non-volatile memory
-- #size-cells: should be 1 to reference the battery-backed non-volatile memory
-
-Optional child nodes:
-- see ../nvmem/nvmem.txt
-
-Example:
-
-	rtc: rtc@740 {
-		compatible = "amlogic,meson6-rtc";
-		reg = <0x740 0x14>;
-		interrupts = <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>;
-		clocks = <&rtc32k_xtal>;
-		vdd-supply = <&rtc_vdd>;
-		resets = <&reset RESET_RTC>;
-
-		#address-cells = <1>;
-		#size-cells = <1>;
-	};

Documentation/devicetree/bindings/rtc/st,m41t80.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/rtc/st,m41t80.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST M41T80 family of RTC and compatible
+
+maintainers:
+  - Alexandre Belloni <alexandre.belloni@bootlin.com>
+
+properties:
+  compatible:
+    enum:
+      - st,m41t62
+      - st,m41t65
+      - st,m41t80
+      - st,m41t81
+      - st,m41t81s
+      - st,m41t82
+      - st,m41t83
+      - st,m41t84
+      - st,m41t85
+      - st,m41t87
+      - microcrystal,rv4162
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  clock-output-names:
+    maxItems: 1
+    description: From common clock binding to override the default output clock name.
+
+  clock:
+    type: object
+    $ref: /schemas/clock/fixed-clock.yaml#
+    properties:
+      clock-frequency:
+        const: 32768
+
+allOf:
+  - $ref: rtc.yaml
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      rtc@68 {
+        compatible = "st,m41t80";
+        reg = <0x68>;
+        interrupt-parent = <&UIC0>;
+        interrupts = <0x9 0x8>;
+
+        clock {
+          compatible = "fixed-clock";
+          #clock-cells = <0>;
+          clock-frequency = <32768>;
+        };
+      };
+    };

drivers/rtc/Kconfig

@@ -433,7 +433,7 @@ config RTC_DRV_ISL12022
 
 config RTC_DRV_ISL12026
 	tristate "Intersil ISL12026"
-	depends on OF || COMPILE_TEST
+	depends on OF
 	help
 	  If you say yes here you get support for the
 	  Intersil ISL12026 RTC chip.
@@ -1351,16 +1351,6 @@ config RTC_DRV_ASM9260
 	  This driver can also be built as a module. If so, the module
 	  will be called rtc-asm9260.
 
-config RTC_DRV_DAVINCI
-	tristate "TI DaVinci RTC"
-	depends on ARCH_DAVINCI_DM365 || COMPILE_TEST
-	help
-	  If you say yes here you get support for the RTC on the
-	  DaVinci platforms (DM365).
-
-	  This driver can also be built as a module. If so, the module
-	  will be called rtc-davinci.
-
 config RTC_DRV_DIGICOLOR
 	tristate "Conexant Digicolor RTC"
 	depends on ARCH_DIGICOLOR || COMPILE_TEST

drivers/rtc/Makefile

@@ -44,7 +44,6 @@ obj-$(CONFIG_RTC_DRV_CROS_EC)	+= rtc-cros-ec.o
 obj-$(CONFIG_RTC_DRV_DA9052)	+= rtc-da9052.o
 obj-$(CONFIG_RTC_DRV_DA9055)	+= rtc-da9055.o
 obj-$(CONFIG_RTC_DRV_DA9063)	+= rtc-da9063.o
-obj-$(CONFIG_RTC_DRV_DAVINCI)	+= rtc-davinci.o
 obj-$(CONFIG_RTC_DRV_DIGICOLOR)	+= rtc-digicolor.o
 obj-$(CONFIG_RTC_DRV_DM355EVM)	+= rtc-dm355evm.o
 obj-$(CONFIG_RTC_DRV_DS1216)	+= rtc-ds1216.o

drivers/rtc/class.c

@@ -374,11 +374,11 @@ struct rtc_device *devm_rtc_allocate_device(struct device *dev)
 
 	rtc->id = id;
 	rtc->dev.parent = dev;
-	err = dev_set_name(&rtc->dev, "rtc%d", id);
+	err = devm_add_action_or_reset(dev, devm_rtc_release_device, rtc);
 	if (err)
 		return ERR_PTR(err);
 
-	err = devm_add_action_or_reset(dev, devm_rtc_release_device, rtc);
+	err = dev_set_name(&rtc->dev, "rtc%d", id);
 	if (err)
 		return ERR_PTR(err);
 

drivers/rtc/interface.c

@@ -256,7 +256,7 @@ int __rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm)
 	 *
 	 * This could all instead be done in the lower level driver,
 	 * but since more than one lower level RTC implementation needs it,
-	 * then it's probably best best to do it here instead of there..
+	 * then it's probably best to do it here instead of there..
 	 */
 
 	/* Get the "before" timestamp */

drivers/rtc/rtc-abx80x.c

@@ -12,6 +12,7 @@
 
 #include <linux/bcd.h>
 #include <linux/i2c.h>
+#include <linux/kstrtox.h>
 #include <linux/module.h>
 #include <linux/of_device.h>
 #include <linux/rtc.h>
@@ -673,13 +674,28 @@ static int abx80x_setup_watchdog(struct abx80x_priv *priv)
 }
 #endif
 
-static int abx80x_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static const struct i2c_device_id abx80x_id[] = {
+	{ "abx80x", ABX80X },
+	{ "ab0801", AB0801 },
+	{ "ab0803", AB0803 },
+	{ "ab0804", AB0804 },
+	{ "ab0805", AB0805 },
+	{ "ab1801", AB1801 },
+	{ "ab1803", AB1803 },
+	{ "ab1804", AB1804 },
+	{ "ab1805", AB1805 },
+	{ "rv1805", RV1805 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, abx80x_id);
+
+static int abx80x_probe(struct i2c_client *client)
 {
 	struct device_node *np = client->dev.of_node;
 	struct abx80x_priv *priv;
 	int i, data, err, trickle_cfg = -EINVAL;
 	char buf[7];
+	const struct i2c_device_id *id = i2c_match_id(abx80x_id, client);
 	unsigned int part = id->driver_data;
 	unsigned int partnumber;
 	unsigned int majrev, minrev;
@@ -847,21 +863,6 @@ static int abx80x_probe(struct i2c_client *client,
 	return devm_rtc_register_device(priv->rtc);
 }
 
-static const struct i2c_device_id abx80x_id[] = {
-	{ "abx80x", ABX80X },
-	{ "ab0801", AB0801 },
-	{ "ab0803", AB0803 },
-	{ "ab0804", AB0804 },
-	{ "ab0805", AB0805 },
-	{ "ab1801", AB1801 },
-	{ "ab1803", AB1803 },
-	{ "ab1804", AB1804 },
-	{ "ab1805", AB1805 },
-	{ "rv1805", RV1805 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, abx80x_id);
-
 #ifdef CONFIG_OF
 static const struct of_device_id abx80x_of_match[] = {
 	{
@@ -914,7 +915,7 @@ static struct i2c_driver abx80x_driver = {
 		.name	= "rtc-abx80x",
 		.of_match_table = of_match_ptr(abx80x_of_match),
 	},
-	.probe		= abx80x_probe,
+	.probe_new	= abx80x_probe,
 	.id_table	= abx80x_id,
 };
 

drivers/rtc/rtc-at91rm9200.c

@@ -130,7 +130,7 @@ static void at91_rtc_write_idr(u32 mask)
 	 *
 	 * Note that there is still a possibility that the mask is updated
 	 * before interrupts have actually been disabled in hardware. The only
-	 * way to be certain would be to poll the IMR-register, which is is
+	 * way to be certain would be to poll the IMR-register, which is
 	 * the very register we are trying to emulate. The register read back
 	 * is a reasonable heuristic.
 	 */

drivers/rtc/rtc-bq32k.c

@@ -13,6 +13,7 @@
 #include <linux/i2c.h>
 #include <linux/rtc.h>
 #include <linux/init.h>
+#include <linux/kstrtox.h>
 #include <linux/errno.h>
 #include <linux/bcd.h>
 

drivers/rtc/rtc-cros-ec.c

@@ -14,6 +14,8 @@
 
 #define DRV_NAME	"cros-ec-rtc"
 
+#define SECS_PER_DAY	(24 * 60 * 60)
+
 /**
  * struct cros_ec_rtc - Driver data for EC RTC
  *
@@ -43,13 +45,8 @@ static int cros_ec_rtc_get(struct cros_ec_device *cros_ec, u32 command,
 	msg.msg.insize = sizeof(msg.data);
 
 	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
-	if (ret < 0) {
-		dev_err(cros_ec->dev,
-			"error getting %s from EC: %d\n",
-			command == EC_CMD_RTC_GET_VALUE ? "time" : "alarm",
-			ret);
+	if (ret < 0)
 		return ret;
-	}
 
 	*response = msg.data.time;
 
@@ -59,7 +56,7 @@ static int cros_ec_rtc_get(struct cros_ec_device *cros_ec, u32 command,
 static int cros_ec_rtc_set(struct cros_ec_device *cros_ec, u32 command,
 			   u32 param)
 {
-	int ret = 0;
+	int ret;
 	struct {
 		struct cros_ec_command msg;
 		struct ec_response_rtc data;
@@ -71,13 +68,8 @@ static int cros_ec_rtc_set(struct cros_ec_device *cros_ec, u32 command,
 	msg.data.time = param;
 
 	ret = cros_ec_cmd_xfer_status(cros_ec, &msg.msg);
-	if (ret < 0) {
-		dev_err(cros_ec->dev, "error setting %s on EC: %d\n",
-			command == EC_CMD_RTC_SET_VALUE ? "time" : "alarm",
-			ret);
+	if (ret < 0)
 		return ret;
-	}
-
 	return 0;
 }
 
@@ -190,8 +182,21 @@ static int cros_ec_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 	ret = cros_ec_rtc_set(cros_ec, EC_CMD_RTC_SET_ALARM, alarm_offset);
 	if (ret < 0) {
-		dev_err(dev, "error setting alarm: %d\n", ret);
-		return ret;
+		if (ret == -EINVAL && alarm_offset >= SECS_PER_DAY) {
+			/*
+			 * RTC chips on some older Chromebooks can only handle
+			 * alarms up to 24h in the future. Try to set an alarm
+			 * below that limit to avoid suspend failures.
+			 */
+			ret = cros_ec_rtc_set(cros_ec, EC_CMD_RTC_SET_ALARM,
+					      SECS_PER_DAY - 1);
+		}
+
+		if (ret < 0) {
+			dev_err(dev, "error setting alarm in %u seconds: %d\n",
+				alarm_offset, ret);
+			return ret;
+		}
 	}
 
 	return 0;

drivers/rtc/rtc-ds1302.c

@@ -185,11 +185,6 @@ static int ds1302_probe(struct spi_device *spi)
 	return 0;
 }
 
-static void ds1302_remove(struct spi_device *spi)
-{
-	spi_set_drvdata(spi, NULL);
-}
-
 #ifdef CONFIG_OF
 static const struct of_device_id ds1302_dt_ids[] = {
 	{ .compatible = "maxim,ds1302", },
@@ -208,7 +203,6 @@ static struct spi_driver ds1302_driver = {
 	.driver.name	= "rtc-ds1302",
 	.driver.of_match_table = of_match_ptr(ds1302_dt_ids),
 	.probe		= ds1302_probe,
-	.remove		= ds1302_remove,
 	.id_table	= ds1302_spi_ids,
 };
 

drivers/rtc/rtc-ds1307.c

@@ -11,6 +11,7 @@
 #include <linux/bcd.h>
 #include <linux/i2c.h>
 #include <linux/init.h>
+#include <linux/kstrtox.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/property.h>
@@ -1218,8 +1219,7 @@ static ssize_t frequency_test_show(struct device *dev,
 
 	regmap_read(ds1307->regmap, M41TXX_REG_CONTROL, &ctrl_reg);
 
-	return scnprintf(buf, PAGE_SIZE, (ctrl_reg & M41TXX_BIT_FT) ? "on\n" :
-			"off\n");
+	return sysfs_emit(buf, (ctrl_reg & M41TXX_BIT_FT) ? "on\n" : "off\n");
 }
 
 static DEVICE_ATTR_RW(frequency_test);

drivers/rtc/rtc-ds1347.c

@@ -112,7 +112,7 @@ static int ds1347_set_time(struct device *dev, struct rtc_time *dt)
 		return err;
 
 	century = (dt->tm_year / 100) + 19;
-	err = regmap_write(map, DS1347_CENTURY_REG, century);
+	err = regmap_write(map, DS1347_CENTURY_REG, bin2bcd(century));
 	if (err)
 		return err;
 

drivers/rtc/rtc-ds1742.c

@@ -158,8 +158,7 @@ static int ds1742_rtc_probe(struct platform_device *pdev)
 	if (!pdata)
 		return -ENOMEM;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	ioaddr = devm_ioremap_resource(&pdev->dev, res);
+	ioaddr = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
 	if (IS_ERR(ioaddr))
 		return PTR_ERR(ioaddr);
 

drivers/rtc/rtc-efi.c

@@ -271,6 +271,8 @@ static int __init efi_rtc_probe(struct platform_device *dev)
 	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->features);
 	set_bit(RTC_FEATURE_ALARM_WAKEUP_ONLY, rtc->features);
 
+	device_init_wakeup(&dev->dev, true);
+
 	return devm_rtc_register_device(rtc);
 }
 

drivers/rtc/rtc-fsl-ftm-alarm.c

@@ -327,12 +327,7 @@ static struct platform_driver ftm_rtc_driver = {
 	},
 };
 
-static int __init ftm_alarm_init(void)
-{
-	return platform_driver_register(&ftm_rtc_driver);
-}
-
-device_initcall(ftm_alarm_init);
+module_platform_driver(ftm_rtc_driver);
 
 MODULE_DESCRIPTION("NXP/Freescale FlexTimer alarm driver");
 MODULE_AUTHOR("Biwen Li <biwen.li@nxp.com>");

drivers/rtc/rtc-isl12022.c

@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/regmap.h>
+#include <linux/hwmon.h>
 
 /* ISL register offsets */
 #define ISL12022_REG_SC		0x00
@@ -30,6 +31,9 @@
 #define ISL12022_REG_SR		0x07
 #define ISL12022_REG_INT	0x08
 
+#define ISL12022_REG_BETA	0x0d
+#define ISL12022_REG_TEMP_L	0x28
+
 /* ISL register bits */
 #define ISL12022_HR_MIL		(1 << 7)	/* military or 24 hour time */
 
@@ -38,6 +42,7 @@
 
 #define ISL12022_INT_WRTC	(1 << 6)
 
+#define ISL12022_BETA_TSE	(1 << 7)
 
 static struct i2c_driver isl12022_driver;
 
@@ -46,6 +51,93 @@ struct isl12022 {
 	struct regmap *regmap;
 };
 
+static umode_t isl12022_hwmon_is_visible(const void *data,
+					 enum hwmon_sensor_types type,
+					 u32 attr, int channel)
+{
+	if (type == hwmon_temp && attr == hwmon_temp_input)
+		return 0444;
+
+	return 0;
+}
+
+/*
+ * A user-initiated temperature conversion is not started by this function,
+ * so the temperature is updated once every ~60 seconds.
+ */
+static int isl12022_hwmon_read_temp(struct device *dev, long *mC)
+{
+	struct isl12022 *isl12022 = dev_get_drvdata(dev);
+	struct regmap *regmap = isl12022->regmap;
+	u8 temp_buf[2];
+	int temp, ret;
+
+	ret = regmap_bulk_read(regmap, ISL12022_REG_TEMP_L,
+			       temp_buf, sizeof(temp_buf));
+	if (ret)
+		return ret;
+	/*
+	 * Temperature is represented as a 10-bit number, unit half-Kelvins.
+	 */
+	temp = (temp_buf[1] << 8) | temp_buf[0];
+	temp *= 500;
+	temp -= 273000;
+
+	*mC = temp;
+
+	return 0;
+}
+
+static int isl12022_hwmon_read(struct device *dev,
+			       enum hwmon_sensor_types type,
+			       u32 attr, int channel, long *val)
+{
+	if (type == hwmon_temp && attr == hwmon_temp_input)
+		return isl12022_hwmon_read_temp(dev, val);
+
+	return -EOPNOTSUPP;
+}
+
+static const struct hwmon_channel_info *isl12022_hwmon_info[] = {
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT),
+	NULL
+};
+
+static const struct hwmon_ops isl12022_hwmon_ops = {
+	.is_visible = isl12022_hwmon_is_visible,
+	.read = isl12022_hwmon_read,
+};
+
+static const struct hwmon_chip_info isl12022_hwmon_chip_info = {
+	.ops = &isl12022_hwmon_ops,
+	.info = isl12022_hwmon_info,
+};
+
+static void isl12022_hwmon_register(struct device *dev)
+{
+	struct isl12022 *isl12022;
+	struct device *hwmon;
+	int ret;
+
+	if (!IS_REACHABLE(CONFIG_HWMON))
+		return;
+
+	isl12022 = dev_get_drvdata(dev);
+
+	ret = regmap_update_bits(isl12022->regmap, ISL12022_REG_BETA,
+				 ISL12022_BETA_TSE, ISL12022_BETA_TSE);
+	if (ret) {
+		dev_warn(dev, "unable to enable temperature sensor\n");
+		return;
+	}
+
+	hwmon = devm_hwmon_device_register_with_info(dev, "isl12022", isl12022,
+						     &isl12022_hwmon_chip_info,
+						     NULL);
+	if (IS_ERR(hwmon))
+		dev_warn(dev, "unable to register hwmon device: %pe\n", hwmon);
+}
+
 /*
  * In the routines that deal directly with the isl12022 hardware, we use
  * rtc_time -- month 0-11, hour 0-23, yr = calendar year-epoch.
@@ -160,6 +252,8 @@ static int isl12022_probe(struct i2c_client *client)
 		return PTR_ERR(isl12022->regmap);
 	}
 
+	isl12022_hwmon_register(&client->dev);
+
 	isl12022->rtc = devm_rtc_allocate_device(&client->dev);
 	if (IS_ERR(isl12022->rtc))
 		return PTR_ERR(isl12022->rtc);

drivers/rtc/rtc-isl1208.c

@@ -797,7 +797,7 @@ static int isl1208_setup_irq(struct i2c_client *client, int irq)
 }
 
 static int
-isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
+isl1208_probe(struct i2c_client *client)
 {
 	int rc = 0;
 	struct isl1208_state *isl1208;
@@ -821,6 +821,8 @@ isl1208_probe(struct i2c_client *client, const struct i2c_device_id *id)
 		if (!isl1208->config)
 			return -ENODEV;
 	} else {
+		const struct i2c_device_id *id = i2c_match_id(isl1208_id, client);
+
 		if (id->driver_data >= ISL_LAST_ID)
 			return -ENODEV;
 		isl1208->config = &isl1208_configs[id->driver_data];
@@ -906,7 +908,7 @@ static struct i2c_driver isl1208_driver = {
 		.name = "rtc-isl1208",
 		.of_match_table = of_match_ptr(isl1208_of_match),
 	},
-	.probe = isl1208_probe,
+	.probe_new = isl1208_probe,
 	.id_table = isl1208_id,
 };
 

drivers/rtc/rtc-m41t80.c

@@ -692,7 +692,7 @@ static void wdt_disable(void)
  *	@ppos: pointer to the position to write. No seeks allowed
  *
  *	A write to a watchdog device is defined as a keepalive signal. Any
- *	write of data will do, as we we don't define content meaning.
+ *	write of data will do, as we don't define content meaning.
  */
 static ssize_t wdt_write(struct file *file, const char __user *buf,
 			 size_t count, loff_t *ppos)
@@ -876,8 +876,7 @@ static struct notifier_block wdt_notifier = {
  *****************************************************************************
  */
 
-static int m41t80_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int m41t80_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	int rc = 0;
@@ -897,11 +896,13 @@ static int m41t80_probe(struct i2c_client *client,
 		return -ENOMEM;
 
 	m41t80_data->client = client;
-	if (client->dev.of_node)
+	if (client->dev.of_node) {
 		m41t80_data->features = (unsigned long)
 			of_device_get_match_data(&client->dev);
-	else
+	} else {
+		const struct i2c_device_id *id = i2c_match_id(m41t80_id, client);
 		m41t80_data->features = id->driver_data;
+	}
 	i2c_set_clientdata(client, m41t80_data);
 
 	m41t80_data->rtc =  devm_rtc_allocate_device(&client->dev);
@@ -1007,7 +1008,7 @@ static struct i2c_driver m41t80_driver = {
 		.of_match_table = of_match_ptr(m41t80_of_match),
 		.pm = &m41t80_pm,
 	},
-	.probe = m41t80_probe,
+	.probe_new = m41t80_probe,
 	.remove = m41t80_remove,
 	.id_table = m41t80_id,
 };

drivers/rtc/rtc-msc313.c

@@ -212,22 +212,12 @@ static int msc313_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	clk = devm_clk_get(dev, NULL);
+	clk = devm_clk_get_enabled(dev, NULL);
 	if (IS_ERR(clk)) {
 		dev_err(dev, "No input reference clock\n");
 		return PTR_ERR(clk);
 	}
 
-	ret = clk_prepare_enable(clk);
-	if (ret) {
-		dev_err(dev, "Failed to enable the reference clock, %d\n", ret);
-		return ret;
-	}
-
-	ret = devm_add_action_or_reset(dev, (void (*) (void *))clk_disable_unprepare, clk);
-	if (ret)
-		return ret;
-
 	rate = clk_get_rate(clk);
 	writew(rate & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_L);
 	writew((rate >> 16) & 0xFFFF, priv->rtc_base + REG_RTC_FREQ_CW_H);

drivers/rtc/rtc-mxc_v2.c

@@ -336,8 +336,10 @@ static int mxc_rtc_probe(struct platform_device *pdev)
 	}
 
 	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
-	if (IS_ERR(pdata->rtc))
+	if (IS_ERR(pdata->rtc)) {
+		clk_disable_unprepare(pdata->clk);
 		return PTR_ERR(pdata->rtc);
+	}
 
 	pdata->rtc->ops = &mxc_rtc_ops;
 	pdata->rtc->range_max = U32_MAX;

drivers/rtc/rtc-nct3018y.c

@@ -452,8 +452,7 @@ static const struct rtc_class_ops nct3018y_rtc_ops = {
 	.ioctl		= nct3018y_ioctl,
 };
 
-static int nct3018y_probe(struct i2c_client *client,
-			  const struct i2c_device_id *id)
+static int nct3018y_probe(struct i2c_client *client)
 {
 	struct nct3018y *nct3018y;
 	int err, flags;
@@ -541,7 +540,7 @@ static struct i2c_driver nct3018y_driver = {
 		.name	= "rtc-nct3018y",
 		.of_match_table = of_match_ptr(nct3018y_of_match),
 	},
-	.probe		= nct3018y_probe,
+	.probe_new	= nct3018y_probe,
 	.id_table	= nct3018y_id,
 };
 

drivers/rtc/rtc-pcf2127.c

@@ -885,9 +885,17 @@ static const struct regmap_bus pcf2127_i2c_regmap = {
 
 static struct i2c_driver pcf2127_i2c_driver;
 
-static int pcf2127_i2c_probe(struct i2c_client *client,
-				const struct i2c_device_id *id)
+static const struct i2c_device_id pcf2127_i2c_id[] = {
+	{ "pcf2127", 1 },
+	{ "pcf2129", 0 },
+	{ "pca2129", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
+
+static int pcf2127_i2c_probe(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_match_id(pcf2127_i2c_id, client);
 	struct regmap *regmap;
 	static const struct regmap_config config = {
 		.reg_bits = 8,
@@ -910,20 +918,12 @@ static int pcf2127_i2c_probe(struct i2c_client *client,
 			     pcf2127_i2c_driver.driver.name, id->driver_data);
 }
 
-static const struct i2c_device_id pcf2127_i2c_id[] = {
-	{ "pcf2127", 1 },
-	{ "pcf2129", 0 },
-	{ "pca2129", 0 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, pcf2127_i2c_id);
-
 static struct i2c_driver pcf2127_i2c_driver = {
 	.driver		= {
 		.name	= "rtc-pcf2127-i2c",
 		.of_match_table = of_match_ptr(pcf2127_of_match),
 	},
-	.probe		= pcf2127_i2c_probe,
+	.probe_new	= pcf2127_i2c_probe,
 	.id_table	= pcf2127_i2c_id,
 };
 

drivers/rtc/rtc-pcf85063.c

@@ -169,10 +169,10 @@ static int pcf85063_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	if (ret)
 		return ret;
 
-	alrm->time.tm_sec = bcd2bin(buf[0]);
-	alrm->time.tm_min = bcd2bin(buf[1]);
-	alrm->time.tm_hour = bcd2bin(buf[2]);
-	alrm->time.tm_mday = bcd2bin(buf[3]);
+	alrm->time.tm_sec = bcd2bin(buf[0] & 0x7f);
+	alrm->time.tm_min = bcd2bin(buf[1] & 0x7f);
+	alrm->time.tm_hour = bcd2bin(buf[2] & 0x3f);
+	alrm->time.tm_mday = bcd2bin(buf[3] & 0x3f);
 
 	ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &val);
 	if (ret)
@@ -424,7 +424,7 @@ static int pcf85063_clkout_control(struct clk_hw *hw, bool enable)
 	unsigned int buf;
 	int ret;
 
-	ret = regmap_read(pcf85063->regmap, PCF85063_REG_OFFSET, &buf);
+	ret = regmap_read(pcf85063->regmap, PCF85063_REG_CTRL2, &buf);
 	if (ret < 0)
 		return ret;
 	buf &= PCF85063_REG_CLKO_F_MASK;

drivers/rtc/rtc-pcf8523.c

@@ -99,24 +99,24 @@ static irqreturn_t pcf8523_irq(int irq, void *dev_id)
 static int pcf8523_rtc_read_time(struct device *dev, struct rtc_time *tm)
 {
 	struct pcf8523 *pcf8523 = dev_get_drvdata(dev);
-	u8 regs[7];
+	u8 regs[10];
 	int err;
 
-	err = regmap_bulk_read(pcf8523->regmap, PCF8523_REG_SECONDS, regs,
+	err = regmap_bulk_read(pcf8523->regmap, PCF8523_REG_CONTROL1, regs,
 			       sizeof(regs));
 	if (err < 0)
 		return err;
 
-	if (regs[0] & PCF8523_SECONDS_OS)
+	if ((regs[0] & PCF8523_CONTROL1_STOP) || (regs[3] & PCF8523_SECONDS_OS))
 		return -EINVAL;
 
-	tm->tm_sec = bcd2bin(regs[0] & 0x7f);
-	tm->tm_min = bcd2bin(regs[1] & 0x7f);
-	tm->tm_hour = bcd2bin(regs[2] & 0x3f);
-	tm->tm_mday = bcd2bin(regs[3] & 0x3f);
-	tm->tm_wday = regs[4] & 0x7;
-	tm->tm_mon = bcd2bin(regs[5] & 0x1f) - 1;
-	tm->tm_year = bcd2bin(regs[6]) + 100;
+	tm->tm_sec = bcd2bin(regs[3] & 0x7f);
+	tm->tm_min = bcd2bin(regs[4] & 0x7f);
+	tm->tm_hour = bcd2bin(regs[5] & 0x3f);
+	tm->tm_mday = bcd2bin(regs[6] & 0x3f);
+	tm->tm_wday = regs[7] & 0x7;
+	tm->tm_mon = bcd2bin(regs[8] & 0x1f) - 1;
+	tm->tm_year = bcd2bin(regs[9]) + 100;
 
 	return 0;
 }

drivers/rtc/rtc-pcf8563.c

@@ -567,6 +567,8 @@ static int pcf8563_probe(struct i2c_client *client)
 								client->irq);
 			return err;
 		}
+	} else {
+		clear_bit(RTC_FEATURE_ALARM, pcf8563->rtc->features);
 	}
 
 	err = devm_rtc_register_device(pcf8563->rtc);

drivers/rtc/rtc-pic32.c

@@ -324,16 +324,16 @@ static int pic32_rtc_probe(struct platform_device *pdev)
 
 	spin_lock_init(&pdata->alarm_lock);
 
+	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
+	if (IS_ERR(pdata->rtc))
+		return PTR_ERR(pdata->rtc);
+
 	clk_prepare_enable(pdata->clk);
 
 	pic32_rtc_enable(pdata, 1);
 
 	device_init_wakeup(&pdev->dev, 1);
 
-	pdata->rtc = devm_rtc_allocate_device(&pdev->dev);
-	if (IS_ERR(pdata->rtc))
-		return PTR_ERR(pdata->rtc);
-
 	pdata->rtc->ops = &pic32_rtcops;
 	pdata->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
 	pdata->rtc->range_max = RTC_TIMESTAMP_END_2099;

drivers/rtc/rtc-pm8xxx.c

@@ -461,7 +461,6 @@ static const struct pm8xxx_rtc_regs pmk8350_regs = {
  */
 static const struct of_device_id pm8xxx_id_table[] = {
 	{ .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
-	{ .compatible = "qcom,pm8018-rtc", .data = &pm8921_regs },
 	{ .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
 	{ .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
 	{ .compatible = "qcom,pmk8350-rtc", .data = &pmk8350_regs },

drivers/rtc/rtc-rk808.c

@@ -14,7 +14,6 @@
 #include <linux/bcd.h>
 #include <linux/mfd/rk808.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 
 /* RTC_CTRL_REG bitfields */
 #define BIT_RTC_CTRL_REG_STOP_RTC_M		BIT(0)
@@ -51,7 +50,7 @@ struct rk_rtc_compat_reg {
 };
 
 struct rk808_rtc {
-	struct rk808 *rk808;
+	struct regmap *regmap;
 	struct rtc_device *rtc;
 	struct rk_rtc_compat_reg *creg;
 	int irq;
@@ -97,12 +96,11 @@ static void gregorian_to_rockchip(struct rtc_time *tm)
 static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 {
 	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
-	struct rk808 *rk808 = rk808_rtc->rk808;
 	u8 rtc_data[NUM_TIME_REGS];
 	int ret;
 
 	/* Force an update of the shadowed registers right now */
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_RTC_GET_TIME,
 				 BIT_RTC_CTRL_REG_RTC_GET_TIME);
 	if (ret) {
@@ -116,7 +114,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 	 * 32khz. If we clear the GET_TIME bit here, the time of i2c transfer
 	 * certainly more than 31.25us: 16 * 2.5us at 400kHz bus frequency.
 	 */
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_RTC_GET_TIME,
 				 0);
 	if (ret) {
@@ -124,7 +122,7 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 		return ret;
 	}
 
-	ret = regmap_bulk_read(rk808->regmap, rk808_rtc->creg->seconds_reg,
+	ret = regmap_bulk_read(rk808_rtc->regmap, rk808_rtc->creg->seconds_reg,
 			       rtc_data, NUM_TIME_REGS);
 	if (ret) {
 		dev_err(dev, "Failed to bulk read rtc_data: %d\n", ret);
@@ -148,7 +146,6 @@ static int rk808_rtc_readtime(struct device *dev, struct rtc_time *tm)
 static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
-	struct rk808 *rk808 = rk808_rtc->rk808;
 	u8 rtc_data[NUM_TIME_REGS];
 	int ret;
 
@@ -163,7 +160,7 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	rtc_data[6] = bin2bcd(tm->tm_wday);
 
 	/* Stop RTC while updating the RTC registers */
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M);
 	if (ret) {
@@ -171,14 +168,14 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
 		return ret;
 	}
 
-	ret = regmap_bulk_write(rk808->regmap, rk808_rtc->creg->seconds_reg,
+	ret = regmap_bulk_write(rk808_rtc->regmap, rk808_rtc->creg->seconds_reg,
 				rtc_data, NUM_TIME_REGS);
 	if (ret) {
 		dev_err(dev, "Failed to bull write rtc_data: %d\n", ret);
 		return ret;
 	}
 	/* Start RTC again */
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M, 0);
 	if (ret) {
 		dev_err(dev, "Failed to update RTC control: %d\n", ret);
@@ -191,12 +188,11 @@ static int rk808_rtc_set_time(struct device *dev, struct rtc_time *tm)
 static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
-	struct rk808 *rk808 = rk808_rtc->rk808;
 	u8 alrm_data[NUM_ALARM_REGS];
 	uint32_t int_reg;
 	int ret;
 
-	ret = regmap_bulk_read(rk808->regmap,
+	ret = regmap_bulk_read(rk808_rtc->regmap,
 			       rk808_rtc->creg->alarm_seconds_reg,
 			       alrm_data, NUM_ALARM_REGS);
 	if (ret) {
@@ -212,7 +208,7 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	alrm->time.tm_year = (bcd2bin(alrm_data[5] & YEARS_REG_MSK)) + 100;
 	rockchip_to_gregorian(&alrm->time);
 
-	ret = regmap_read(rk808->regmap, rk808_rtc->creg->int_reg, &int_reg);
+	ret = regmap_read(rk808_rtc->regmap, rk808_rtc->creg->int_reg, &int_reg);
 	if (ret) {
 		dev_err(dev, "Failed to read RTC INT REG: %d\n", ret);
 		return ret;
@@ -228,10 +224,9 @@ static int rk808_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm)
 
 static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
 {
-	struct rk808 *rk808 = rk808_rtc->rk808;
 	int ret;
 
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->int_reg,
 				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M, 0);
 
 	return ret;
@@ -239,10 +234,9 @@ static int rk808_rtc_stop_alarm(struct rk808_rtc *rk808_rtc)
 
 static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
 {
-	struct rk808 *rk808 = rk808_rtc->rk808;
 	int ret;
 
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->int_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->int_reg,
 				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M,
 				 BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
 
@@ -252,7 +246,6 @@ static int rk808_rtc_start_alarm(struct rk808_rtc *rk808_rtc)
 static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 {
 	struct rk808_rtc *rk808_rtc = dev_get_drvdata(dev);
-	struct rk808 *rk808 = rk808_rtc->rk808;
 	u8 alrm_data[NUM_ALARM_REGS];
 	int ret;
 
@@ -272,7 +265,7 @@ static int rk808_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm)
 	alrm_data[4] = bin2bcd(alrm->time.tm_mon + 1);
 	alrm_data[5] = bin2bcd(alrm->time.tm_year - 100);
 
-	ret = regmap_bulk_write(rk808->regmap,
+	ret = regmap_bulk_write(rk808_rtc->regmap,
 				rk808_rtc->creg->alarm_seconds_reg,
 				alrm_data, NUM_ALARM_REGS);
 	if (ret) {
@@ -313,20 +306,18 @@ static int rk808_rtc_alarm_irq_enable(struct device *dev,
 static irqreturn_t rk808_alarm_irq(int irq, void *data)
 {
 	struct rk808_rtc *rk808_rtc = data;
-	struct rk808 *rk808 = rk808_rtc->rk808;
-	struct i2c_client *client = rk808->i2c;
 	int ret;
 
-	ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
+	ret = regmap_write(rk808_rtc->regmap, rk808_rtc->creg->status_reg,
 			   RTC_STATUS_MASK);
 	if (ret) {
-		dev_err(&client->dev,
+		dev_err(&rk808_rtc->rtc->dev,
 			"%s:Failed to update RTC status: %d\n", __func__, ret);
 		return ret;
 	}
 
 	rtc_update_irq(rk808_rtc->rtc, 1, RTC_IRQF | RTC_AF);
-	dev_dbg(&client->dev,
+	dev_dbg(&rk808_rtc->rtc->dev,
 		 "%s:irq=%d\n", __func__, irq);
 	return IRQ_HANDLED;
 }
@@ -404,10 +395,12 @@ static int rk808_rtc_probe(struct platform_device *pdev)
 		break;
 	}
 	platform_set_drvdata(pdev, rk808_rtc);
-	rk808_rtc->rk808 = rk808;
+	rk808_rtc->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!rk808_rtc->regmap)
+		return -ENODEV;
 
 	/* start rtc running by default, and use shadowed timer. */
-	ret = regmap_update_bits(rk808->regmap, rk808_rtc->creg->ctrl_reg,
+	ret = regmap_update_bits(rk808_rtc->regmap, rk808_rtc->creg->ctrl_reg,
 				 BIT_RTC_CTRL_REG_STOP_RTC_M |
 				 BIT_RTC_CTRL_REG_RTC_READSEL_M,
 				 BIT_RTC_CTRL_REG_RTC_READSEL_M);
@@ -417,7 +410,7 @@ static int rk808_rtc_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = regmap_write(rk808->regmap, rk808_rtc->creg->status_reg,
+	ret = regmap_write(rk808_rtc->regmap, rk808_rtc->creg->status_reg,
 			   RTC_STATUS_MASK);
 	if (ret) {
 		dev_err(&pdev->dev,

drivers/rtc/rtc-rs5c313.c

@@ -2,7 +2,7 @@
  * Ricoh RS5C313 RTC device/driver
  *  Copyright (C) 2007 Nobuhiro Iwamatsu
  *
- *  2005-09-19 modifed by kogiidena
+ *  2005-09-19 modified by kogiidena
  *
  * Based on the old drivers/char/rs5c313_rtc.c  by:
  *  Copyright (C) 2000 Philipp Rumpf <prumpf@tux.org>
@@ -36,7 +36,7 @@
  *      1.11a   Daniele Bellucci: Audit create_proc_read_entry in rtc_init
  *	1.12	Venkatesh Pallipadi: Hooks for emulating rtc on HPET base-timer
  *		CONFIG_HPET_EMULATE_RTC
- *	1.13	Nobuhiro Iwamatsu: Updata driver.
+ *	1.13	Nobuhiro Iwamatsu: Update driver.
  */
 
 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
@@ -280,7 +280,7 @@ static int rs5c313_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	while (1) {
 		RS5C313_CEENABLE;	/* CE:H */
 
-		/* Initiatlize control reg. 24 hour */
+		/* Initialize control reg. 24 hour */
 		rs5c313_write_cntreg(0x04);
 
 		if (!(rs5c313_read_cntreg() & RS5C313_CNTREG_ADJ_BSY))

drivers/rtc/rtc-rs5c372.c

@@ -150,7 +150,7 @@ static int rs5c_get_regs(struct rs5c372 *rs5c)
 	 * least 80219 chips; this works around that bug.
 	 *
 	 * The third method on the other hand doesn't work for the SMBus-only
-	 * configurations, so we use the the first method there, stripping off
+	 * configurations, so we use the first method there, stripping off
 	 * the extra register in the process.
 	 */
 	if (rs5c->smbus) {
@@ -791,8 +791,7 @@ static int rs5c_oscillator_setup(struct rs5c372 *rs5c372)
 	return 0;
 }
 
-static int rs5c372_probe(struct i2c_client *client,
-			 const struct i2c_device_id *id)
+static int rs5c372_probe(struct i2c_client *client)
 {
 	int err = 0;
 	int smbus_mode = 0;
@@ -826,11 +825,13 @@ static int rs5c372_probe(struct i2c_client *client,
 
 	rs5c372->client = client;
 	i2c_set_clientdata(client, rs5c372);
-	if (client->dev.of_node)
+	if (client->dev.of_node) {
 		rs5c372->type = (enum rtc_type)
 			of_device_get_match_data(&client->dev);
-	else
+	} else {
+		const struct i2c_device_id *id = i2c_match_id(rs5c372_id, client);
 		rs5c372->type = id->driver_data;
+	}
 
 	/* we read registers 0x0f then 0x00-0x0f; skip the first one */
 	rs5c372->regs = &rs5c372->buf[1];
@@ -920,7 +921,7 @@ static struct i2c_driver rs5c372_driver = {
 		.name	= "rtc-rs5c372",
 		.of_match_table = of_match_ptr(rs5c372_of_match),
 	},
-	.probe		= rs5c372_probe,
+	.probe_new	= rs5c372_probe,
 	.remove		= rs5c372_remove,
 	.id_table	= rs5c372_id,
 };

drivers/rtc/rtc-rv3028.c

@@ -902,9 +902,20 @@ static int rv3028_probe(struct i2c_client *client)
 		return PTR_ERR(rv3028->rtc);
 
 	if (client->irq > 0) {
+		unsigned long flags;
+
+		/*
+		 * If flags = 0, devm_request_threaded_irq() will use IRQ flags
+		 * obtained from device tree.
+		 */
+		if (dev_fwnode(&client->dev))
+			flags = 0;
+		else
+			flags = IRQF_TRIGGER_LOW;
+
 		ret = devm_request_threaded_irq(&client->dev, client->irq,
 						NULL, rv3028_handle_irq,
-						IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+						flags | IRQF_ONESHOT,
 						"rv3028", rv3028);
 		if (ret) {
 			dev_warn(&client->dev, "unable to request IRQ, alarms disabled\n");

drivers/rtc/rtc-rv3029c2.c

@@ -17,6 +17,7 @@
 #include <linux/of.h>
 #include <linux/hwmon.h>
 #include <linux/hwmon-sysfs.h>
+#include <linux/kstrtox.h>
 #include <linux/regmap.h>
 
 /* Register map */

drivers/rtc/rtc-rv8803.c

@@ -576,8 +576,16 @@ static int rv8803_regs_configure(struct rv8803_data *rv8803)
 	return 0;
 }
 
-static int rv8803_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static const struct i2c_device_id rv8803_id[] = {
+	{ "rv8803", rv_8803 },
+	{ "rv8804", rx_8804 },
+	{ "rx8803", rx_8803 },
+	{ "rx8900", rx_8900 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, rv8803_id);
+
+static int rv8803_probe(struct i2c_client *client)
 {
 	struct i2c_adapter *adapter = client->adapter;
 	struct rv8803_data *rv8803;
@@ -605,11 +613,14 @@ static int rv8803_probe(struct i2c_client *client,
 
 	mutex_init(&rv8803->flags_lock);
 	rv8803->client = client;
-	if (client->dev.of_node)
+	if (client->dev.of_node) {
 		rv8803->type = (enum rv8803_type)
 			of_device_get_match_data(&client->dev);
-	else
+	} else {
+		const struct i2c_device_id *id = i2c_match_id(rv8803_id, client);
+
 		rv8803->type = id->driver_data;
+	}
 	i2c_set_clientdata(client, rv8803);
 
 	flags = rv8803_read_reg(client, RV8803_FLAG);
@@ -666,15 +677,6 @@ static int rv8803_probe(struct i2c_client *client,
 	return 0;
 }
 
-static const struct i2c_device_id rv8803_id[] = {
-	{ "rv8803", rv_8803 },
-	{ "rv8804", rx_8804 },
-	{ "rx8803", rx_8803 },
-	{ "rx8900", rx_8900 },
-	{ }
-};
-MODULE_DEVICE_TABLE(i2c, rv8803_id);
-
 static const __maybe_unused struct of_device_id rv8803_of_match[] = {
 	{
 		.compatible = "microcrystal,rv8803",
@@ -701,7 +703,7 @@ static struct i2c_driver rv8803_driver = {
 		.name = "rtc-rv8803",
 		.of_match_table = of_match_ptr(rv8803_of_match),
 	},
-	.probe		= rv8803_probe,
+	.probe_new	= rv8803_probe,
 	.id_table	= rv8803_id,
 };
 module_i2c_driver(rv8803_driver);

drivers/rtc/rtc-rx6110.c

@@ -376,7 +376,7 @@ static const struct spi_device_id rx6110_spi_id[] = {
 };
 MODULE_DEVICE_TABLE(spi, rx6110_spi_id);
 
-static const struct of_device_id rx6110_spi_of_match[] = {
+static const __maybe_unused struct of_device_id rx6110_spi_of_match[] = {
 	{ .compatible = "epson,rx6110" },
 	{ },
 };

drivers/rtc/rtc-rx8025.c

@@ -19,6 +19,7 @@
 #include <linux/bitops.h>
 #include <linux/i2c.h>
 #include <linux/kernel.h>
+#include <linux/kstrtox.h>
 #include <linux/module.h>
 #include <linux/rtc.h>
 
@@ -519,9 +520,9 @@ static const struct attribute_group rx8025_attr_group = {
 	.attrs	= rx8025_attrs,
 };
 
-static int rx8025_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int rx8025_probe(struct i2c_client *client)
 {
+	const struct i2c_device_id *id = i2c_match_id(rx8025_id, client);
 	struct i2c_adapter *adapter = client->adapter;
 	struct rx8025_data *rx8025;
 	int err = 0;
@@ -580,7 +581,7 @@ static struct i2c_driver rx8025_driver = {
 	.driver = {
 		.name = "rtc-rx8025",
 	},
-	.probe		= rx8025_probe,
+	.probe_new	= rx8025_probe,
 	.id_table	= rx8025_id,
 };
 

drivers/rtc/rtc-rzn1.c

@@ -355,7 +355,9 @@ static int rzn1_rtc_probe(struct platform_device *pdev)
 	set_bit(RTC_FEATURE_ALARM_RES_MINUTE, rtc->rtcdev->features);
 	clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, rtc->rtcdev->features);
 
-	devm_pm_runtime_enable(&pdev->dev);
+	ret = devm_pm_runtime_enable(&pdev->dev);
+	if (ret < 0)
+		return ret;
 	ret = pm_runtime_resume_and_get(&pdev->dev);
 	if (ret < 0)
 		return ret;

drivers/rtc/rtc-s35390a.c

@@ -211,7 +211,7 @@ static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
 {
 	struct i2c_client *client = to_i2c_client(dev);
 	struct s35390a	*s35390a = i2c_get_clientdata(client);
-	int i, err;
+	int i;
 	char buf[7], status;
 
 	dev_dbg(&client->dev, "%s: tm is secs=%d, mins=%d, hours=%d mday=%d, "
@@ -234,9 +234,7 @@ static int s35390a_rtc_set_time(struct device *dev, struct rtc_time *tm)
 	for (i = 0; i < 7; ++i)
 		buf[i] = bitrev8(buf[i]);
 
-	err = s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
-
-	return err;
+	return s35390a_set_reg(s35390a, S35390A_CMD_TIME1, buf, sizeof(buf));
 }
 
 static int s35390a_rtc_read_time(struct device *dev, struct rtc_time *tm)

drivers/rtc/rtc-s3c.c

@@ -429,14 +429,9 @@ static int s3c_rtc_probe(struct platform_device *pdev)
 		return PTR_ERR(info->base);
 
 	info->rtc_clk = devm_clk_get(&pdev->dev, "rtc");
-	if (IS_ERR(info->rtc_clk)) {
-		ret = PTR_ERR(info->rtc_clk);
-		if (ret != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to find rtc clock\n");
-		else
-			dev_dbg(&pdev->dev, "probe deferred due to missing rtc clk\n");
-		return ret;
-	}
+	if (IS_ERR(info->rtc_clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(info->rtc_clk),
+				     "failed to find rtc clock\n");
 	ret = clk_prepare_enable(info->rtc_clk);
 	if (ret)
 		return ret;

drivers/rtc/rtc-snvs.c

@@ -32,6 +32,14 @@
 #define SNVS_LPPGDR_INIT	0x41736166
 #define CNTR_TO_SECS_SH		15
 
+/* The maximum RTC clock cycles that are allowed to pass between two
+ * consecutive clock counter register reads. If the values are corrupted a
+ * bigger difference is expected. The RTC frequency is 32kHz. With 320 cycles
+ * we end at 10ms which should be enough for most cases. If it once takes
+ * longer than expected we do a retry.
+ */
+#define MAX_RTC_READ_DIFF_CYCLES	320
+
 struct snvs_rtc_data {
 	struct rtc_device *rtc;
 	struct regmap *regmap;
@@ -56,6 +64,7 @@ static u64 rtc_read_lpsrt(struct snvs_rtc_data *data)
 static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
 {
 	u64 read1, read2;
+	s64 diff;
 	unsigned int timeout = 100;
 
 	/* As expected, the registers might update between the read of the LSB
@@ -66,7 +75,8 @@ static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
 	do {
 		read2 = read1;
 		read1 = rtc_read_lpsrt(data);
-	} while (read1 != read2 && --timeout);
+		diff = read1 - read2;
+	} while (((diff < 0) || (diff > MAX_RTC_READ_DIFF_CYCLES)) && --timeout);
 	if (!timeout)
 		dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
 
@@ -78,13 +88,15 @@ static u32 rtc_read_lp_counter(struct snvs_rtc_data *data)
 static int rtc_read_lp_counter_lsb(struct snvs_rtc_data *data, u32 *lsb)
 {
 	u32 count1, count2;
+	s32 diff;
 	unsigned int timeout = 100;
 
 	regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
 	do {
 		count2 = count1;
 		regmap_read(data->regmap, data->offset + SNVS_LPSRTCLR, &count1);
-	} while (count1 != count2 && --timeout);
+		diff = count1 - count2;
+	} while (((diff < 0) || (diff > MAX_RTC_READ_DIFF_CYCLES)) && --timeout);
 	if (!timeout) {
 		dev_err(&data->rtc->dev, "Timeout trying to get valid LPSRT Counter read\n");
 		return -ETIMEDOUT;

drivers/rtc/rtc-st-lpc.c

@@ -238,6 +238,7 @@ static int st_rtc_probe(struct platform_device *pdev)
 
 	rtc->clkrate = clk_get_rate(rtc->clk);
 	if (!rtc->clkrate) {
+		clk_disable_unprepare(rtc->clk);
 		dev_err(&pdev->dev, "Unable to fetch clock rate\n");
 		return -EINVAL;
 	}

drivers/rtc/sysfs.c

@@ -6,6 +6,7 @@
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  */
 
+#include <linux/kstrtox.h>
 #include <linux/module.h>
 #include <linux/rtc.h>