Commit acd41d36 authored by Len Brown's avatar Len Brown

Merge branch 'suspend' into test

parents 4dff4e7f 4fb507b6
......@@ -78,19 +78,17 @@ acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
return_ACPI_STATUS(status);
}
/* Set the vector */
/*
* According to the ACPI specification 2.0c and later, the 64-bit
* waking vector should be cleared and the 32-bit waking vector should
* be used, unless we want the wake-up code to be called by the BIOS in
* Protected Mode. Some systems (for example HP dv5-1004nr) are known
* to fail to resume if the 64-bit vector is used.
*/
if (facs->version >= 1)
facs->xfirmware_waking_vector = 0;
if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
/*
* ACPI 1.0 FACS or short table or optional X_ field is zero
*/
facs->firmware_waking_vector = (u32) physical_address;
} else {
/*
* ACPI 2.0 FACS with valid X_ field
*/
facs->xfirmware_waking_vector = physical_address;
}
facs->firmware_waking_vector = (u32)physical_address;
return_ACPI_STATUS(AE_OK);
}
......@@ -134,20 +132,7 @@ acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
}
/* Get the vector */
if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
/*
* ACPI 1.0 FACS or short table or optional X_ field is zero
*/
*physical_address =
(acpi_physical_address) facs->firmware_waking_vector;
} else {
/*
* ACPI 2.0 FACS with valid X_ field
*/
*physical_address =
(acpi_physical_address) facs->xfirmware_waking_vector;
}
*physical_address = (acpi_physical_address)facs->firmware_waking_vector;
return_ACPI_STATUS(AE_OK);
}
......@@ -627,6 +612,13 @@ acpi_status acpi_leave_sleep_state(u8 sleep_state)
}
/* TBD: _WAK "sometimes" returns stuff - do we want to look at it? */
/*
* Some BIOSes assume that WAK_STS will be cleared on resume and use
* it to determine whether the system is rebooting or resuming. Clear
* it for compatibility.
*/
acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
acpi_gbl_system_awake_and_running = TRUE;
/* Enable power button */
......
......@@ -15,6 +15,7 @@
#include <linux/dmi.h>
#include <linux/device.h>
#include <linux/suspend.h>
#include <linux/reboot.h>
#include <asm/io.h>
......@@ -25,6 +26,36 @@
u8 sleep_states[ACPI_S_STATE_COUNT];
static u32 acpi_target_sleep_state = ACPI_STATE_S0;
static void acpi_sleep_tts_switch(u32 acpi_state)
{
union acpi_object in_arg = { ACPI_TYPE_INTEGER };
struct acpi_object_list arg_list = { 1, &in_arg };
acpi_status status = AE_OK;
in_arg.integer.value = acpi_state;
status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
/*
* OS can't evaluate the _TTS object correctly. Some warning
* message will be printed. But it won't break anything.
*/
printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
}
}
static int tts_notify_reboot(struct notifier_block *this,
unsigned long code, void *x)
{
acpi_sleep_tts_switch(ACPI_STATE_S5);
return NOTIFY_DONE;
}
static struct notifier_block tts_notifier = {
.notifier_call = tts_notify_reboot,
.next = NULL,
.priority = 0,
};
static int acpi_sleep_prepare(u32 acpi_state)
{
#ifdef CONFIG_ACPI_SLEEP
......@@ -130,6 +161,7 @@ static void acpi_pm_end(void)
* failing transition to a sleep state.
*/
acpi_target_sleep_state = ACPI_STATE_S0;
acpi_sleep_tts_switch(acpi_target_sleep_state);
}
#endif /* CONFIG_ACPI_SLEEP */
......@@ -154,6 +186,7 @@ static int acpi_suspend_begin(suspend_state_t pm_state)
if (sleep_states[acpi_state]) {
acpi_target_sleep_state = acpi_state;
acpi_sleep_tts_switch(acpi_target_sleep_state);
} else {
printk(KERN_ERR "ACPI does not support this state: %d\n",
pm_state);
......@@ -199,6 +232,8 @@ static int acpi_suspend_enter(suspend_state_t pm_state)
break;
}
/* If ACPI is not enabled by the BIOS, we need to enable it here. */
acpi_enable();
/* Reprogram control registers and execute _BFS */
acpi_leave_sleep_state_prep(acpi_state);
......@@ -295,6 +330,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
},
},
{
.callback = init_old_suspend_ordering,
.ident = "HP xw4600 Workstation",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
},
},
{},
};
#endif /* CONFIG_SUSPEND */
......@@ -312,6 +355,7 @@ void __init acpi_no_s4_hw_signature(void)
static int acpi_hibernation_begin(void)
{
acpi_target_sleep_state = ACPI_STATE_S4;
acpi_sleep_tts_switch(acpi_target_sleep_state);
return 0;
}
......@@ -375,7 +419,15 @@ static struct platform_hibernation_ops acpi_hibernation_ops = {
*/
static int acpi_hibernation_begin_old(void)
{
int error = acpi_sleep_prepare(ACPI_STATE_S4);
int error;
/*
* The _TTS object should always be evaluated before the _PTS object.
* When the old_suspended_ordering is true, the _PTS object is
* evaluated in the acpi_sleep_prepare.
*/
acpi_sleep_tts_switch(ACPI_STATE_S4);
error = acpi_sleep_prepare(ACPI_STATE_S4);
if (!error)
acpi_target_sleep_state = ACPI_STATE_S4;
......@@ -595,5 +647,10 @@ int __init acpi_sleep_init(void)
pm_power_off = acpi_power_off;
}
printk(")\n");
/*
* Register the tts_notifier to reboot notifier list so that the _TTS
* object can also be evaluated when the system enters S5.
*/
register_reboot_notifier(&tts_notifier);
return 0;
}
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment