ARM: dts: stm32: put ETZPC as an access controller for STM32MP15x boards

Reference ETZPC as an access-control-provider.

For more information on which peripheral is securable or supports MCU
isolation, please read the STM32MP15 reference manual
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>

arch/arm/boot/dts/st/stm32mp153.dtsi

@@ -41,6 +41,7 @@ m_can1: can@4400e000 {
 		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 		clock-names = "hclk", "cclk";
 		bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
+		access-controllers = <&etzpc 62>;
 		status = "disabled";
 	};
 
@@ -54,6 +55,7 @@ m_can2: can@4400f000 {
 		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 		clock-names = "hclk", "cclk";
 		bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
+		access-controllers = <&etzpc 62>;
 		status = "disabled";
 	};
 };

arch/arm/boot/dts/st/stm32mp15xc.dtsi

@@ -11,6 +11,7 @@ cryp1: cryp@54001000 {
 		interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
 		clocks = <&rcc CRYP1>;
 		resets = <&rcc CRYP1_R>;
+		access-controllers = <&etzpc 9>;
 		status = "disabled";
 	};
 };