Commit ad638459 authored by Xenia Ragiadakou's avatar Xenia Ragiadakou Committed by Greg Kroah-Hartman

STAGING: rtl8192u: fix checkpatch error by adding space after switch

This patch fixes the following checkpatch error:
ERROR: space required before the open parenthesis '('
Signed-off-by: default avatarXenia Ragiadakou <burzalodowa@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 3c19fbb6
......@@ -148,7 +148,7 @@ DOT11D_ScanComplete(
{
PRT_DOT11D_INFO pDot11dInfo = GET_DOT11D_INFO(dev);
switch(pDot11dInfo->State)
switch (pDot11dInfo->State)
{
case DOT11D_STATE_LEARNED:
pDot11dInfo->State = DOT11D_STATE_DONE;
......
......@@ -356,7 +356,7 @@ void ieee80211_tx_query_agg_cap(struct ieee80211_device *ieee, struct sk_buff *s
}
}
FORCED_AGG_SETTING:
switch(pHTInfo->ForcedAMPDUMode )
switch (pHTInfo->ForcedAMPDUMode )
{
case HT_AGG_AUTO:
break;
......
......@@ -177,7 +177,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tPrimary channel = %d\n", pHTInfoEle->ControlChl);
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tSenondary channel =");
switch(pHTInfoEle->ExtChlOffset)
switch (pHTInfoEle->ExtChlOffset)
{
case 0:
IEEE80211_DEBUG(IEEE80211_DL_HT, "Not Present\n");
......@@ -195,7 +195,7 @@ void HTDebugHTInfo(u8 *InfoIE, u8 *TitleString)
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tRecommended channel width = %s\n", (pHTInfoEle->RecommemdedTxWidth)?"20Mhz": "40Mhz");
IEEE80211_DEBUG(IEEE80211_DL_HT, "\tOperation mode for protection = ");
switch(pHTInfoEle->OptMode)
switch (pHTInfoEle->OptMode)
{
case 0:
IEEE80211_DEBUG(IEEE80211_DL_HT, "No Protection\n");
......@@ -801,7 +801,7 @@ u8 HT_PickMCSRate(struct ieee80211_device *ieee, u8 *pOperateMCS)
return false;
}
switch(ieee->mode)
switch (ieee->mode)
{
case IEEE_A:
case IEEE_B:
......
......@@ -367,7 +367,7 @@ bool GetTs(
return false;
}
switch(TID)
switch (TID)
{
case 0:
case 3:
......
......@@ -34,7 +34,7 @@ void PHY_SetRF8256Bandwidth(struct net_device *dev , HT_CHANNEL_WIDTH Bandwidth)
if (!rtl8192_phy_CheckIsLegalRFPath(dev, eRFPath))
continue;
switch(Bandwidth)
switch (Bandwidth)
{
case HT_CHANNEL_WIDTH_20:
if(priv->card_8192_version == VERSION_819xU_A || priv->card_8192_version == VERSION_819xU_B)// 8256 D-cut, E-cut, xiong: consider it later!
......@@ -133,7 +133,7 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
// pHalData->RfReg0Value[eRFPath] = rtl8192_phy_QueryRFReg(dev, (RF90_RADIO_PATH_E)eRFPath, rGlobalCtrl, bMaskDWord);
/*----Store original RFENV control type----*/
switch(eRFPath)
switch (eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
......@@ -168,7 +168,7 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
RetryTimes = ConstRetryTimes;
RF3_Final_Value = 0;
/*----Initialize RF fom connfiguration file----*/
switch(eRFPath)
switch (eRFPath)
{
case RF90_PATH_A:
while(RF3_Final_Value!=RegValueToBeCheck && RetryTimes!=0)
......@@ -209,7 +209,7 @@ void phy_RF8256_Config_ParaFile(struct net_device *dev)
}
/*----Restore RFENV control type----*/;
switch(eRFPath)
switch (eRFPath)
{
case RF90_PATH_A:
case RF90_PATH_C:
......
......@@ -1014,7 +1014,7 @@ int alloc_tx_beacon_desc_ring(struct net_device *dev, int count)
inline u16 ieeerate2rtlrate(int rate)
{
switch(rate){
switch (rate){
case 10:
return 0;
case 20:
......@@ -1543,7 +1543,7 @@ void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
for (i=0; i<net->rates_len; i++)
{
basic_rate = net->rates[i]&0x7f;
switch(basic_rate)
switch (basic_rate)
{
case MGN_1M: *rate_config |= RRSR_1M; break;
case MGN_2M: *rate_config |= RRSR_2M; break;
......@@ -1562,7 +1562,7 @@ void rtl8192_config_rate(struct net_device *dev, u16 *rate_config)
for (i=0; i<net->rates_ex_len; i++)
{
basic_rate = net->rates_ex[i]&0x7f;
switch(basic_rate)
switch (basic_rate)
{
case MGN_1M: *rate_config |= RRSR_1M; break;
case MGN_2M: *rate_config |= RRSR_2M; break;
......@@ -1698,7 +1698,7 @@ u16 N_DBPSOfRate(u16 DataRate)
{
u16 N_DBPS = 24;
switch(DataRate)
switch (DataRate)
{
case 60:
N_DBPS = 24;
......@@ -1824,7 +1824,7 @@ u8 MapHwQueueToFirmwareQueue(u8 QueueID)
{
u8 QueueSelect = 0x0; //defualt set to
switch(QueueID) {
switch (QueueID) {
case BE_QUEUE:
QueueSelect = QSLT_BE; //or QSelect = pTcb->priority;
break;
......@@ -1870,7 +1870,7 @@ u8 MRateToHwRate8190Pci(u8 rate)
{
u8 ret = DESC90_RATE1M;
switch(rate) {
switch (rate) {
case MGN_1M: ret = DESC90_RATE1M; break;
case MGN_2M: ret = DESC90_RATE2M; break;
case MGN_5_5M: ret = DESC90_RATE5_5M; break;
......@@ -2581,7 +2581,7 @@ u8 rtl8192_getSupportedWireleeMode(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
u8 ret = 0;
switch(priv->rf_chip)
switch (priv->rf_chip)
{
case RF_8225:
case RF_8256:
......@@ -3019,7 +3019,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
}//end if VersionID == VERSION_819xU_A
//added by vivi, for dlink led, 20080416
switch(priv->eeprom_CustomerID)
switch (priv->eeprom_CustomerID)
{
case EEPROM_CID_RUNTOP:
priv->CustomerID = RT_CID_819x_RUNTOP;
......@@ -3035,7 +3035,7 @@ static void rtl8192_read_eeprom_info(struct net_device *dev)
}
switch(priv->CustomerID)
switch (priv->CustomerID)
{
case RT_CID_819x_RUNTOP:
priv->LedStrategy = SW_LED_MODE2;
......@@ -3146,7 +3146,7 @@ void rtl8192_hwconfig(struct net_device *dev)
// Set RRSR, RATR, and BW_OPMODE registers
//
switch(priv->ieee80211->mode)
switch (priv->ieee80211->mode)
{
case WIRELESS_MODE_B:
regBwOpMode = BW_OPMODE_20MHZ;
......@@ -4402,7 +4402,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
u8 ret_rate = 0xff;
if(!bIsHT) {
switch(rate) {
switch (rate) {
case DESC90_RATE1M: ret_rate = MGN_1M; break;
case DESC90_RATE2M: ret_rate = MGN_2M; break;
case DESC90_RATE5_5M: ret_rate = MGN_5_5M; break;
......@@ -4423,7 +4423,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate)
}
} else {
switch(rate) {
switch (rate) {
case DESC90_RATEMCS0: ret_rate = MGN_MCS0; break;
case DESC90_RATEMCS1: ret_rate = MGN_MCS1; break;
case DESC90_RATEMCS2: ret_rate = MGN_MCS2; break;
......@@ -4890,7 +4890,7 @@ static void rtl8192_query_rxphystatus(
{
report = pcck_buf->cck_agc_rpt & 0xc0;
report = report>>6;
switch(report)
switch (report)
{
//Fixed by Jacken from Bryant 2008-03-20
//Original value is -38 , -26 , -14 , -2
......@@ -4913,7 +4913,7 @@ static void rtl8192_query_rxphystatus(
{
report = pcck_buf->cck_agc_rpt & 0x60;
report = report>>5;
switch(report)
switch (report)
{
case 0x3:
rx_pwr_all = -35 - ((pcck_buf->cck_agc_rpt & 0x1f)<<1) ;
......@@ -5180,7 +5180,7 @@ UpdateReceivedRateHistogramStatistics8190(
else
preamble_guardinterval = 0;// long
switch(stats->rate)
switch (stats->rate)
{
//
// CCK rate
......
......@@ -3581,7 +3581,7 @@ void dm_check_fsync(struct net_device *dev)
{
if(priv->ieee80211->bfsync_enable == 0)
{
switch(priv->ieee80211->fsync_state)
switch (priv->ieee80211->fsync_state)
{
case Default_Fsync:
dm_StartHWFsync(dev);
......@@ -3599,7 +3599,7 @@ void dm_check_fsync(struct net_device *dev)
}
else
{
switch(priv->ieee80211->fsync_state)
switch (priv->ieee80211->fsync_state)
{
case Default_Fsync:
dm_StartSWFsync(dev);
......@@ -3632,7 +3632,7 @@ void dm_check_fsync(struct net_device *dev)
}
else
{
switch(priv->ieee80211->fsync_state)
switch (priv->ieee80211->fsync_state)
{
case HW_Fsync:
dm_EndHWFsync(dev);
......
......@@ -709,7 +709,7 @@ static int r8192_wx_set_enc(struct net_device *dev,
#define CONF_WEP40 0x4
#define CONF_WEP104 0x14
switch(wrqu->encoding.flags & IW_ENCODE_INDEX){
switch (wrqu->encoding.flags & IW_ENCODE_INDEX){
case 0: key_idx = ieee->tx_keyidx; break;
case 1: key_idx = 0; break;
case 2: key_idx = 1; break;
......
......@@ -732,7 +732,7 @@ cmpk_message_handle_rx(
/* 2007/01/17 MH We support aggregation of different cmd in the same packet. */
element_id = pcmd_buff[0];
switch(element_id)
switch (element_id)
{
case RX_TX_FEEDBACK:
cmpk_handle_tx_feedback (dev, pcmd_buff);
......
......@@ -333,7 +333,7 @@ bool init_firmware(struct net_device *dev)
goto download_firmware_fail;
}
switch(init_step) {
switch (init_step) {
case FW_INIT_STEP0_BOOT:
/* Download boot
* initialize command descriptor.
......
......@@ -710,7 +710,7 @@ u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF9
//
// Write Data to register and readback
//
switch(CheckBlock)
switch (CheckBlock)
{
case HW90_BLOCK_MAC:
RT_TRACE(COMP_ERR, "PHY_CheckBBRFOK(): Never Write 0x100 here!");
......@@ -892,7 +892,7 @@ void rtl8192_phy_setTxPower(struct net_device *dev, u8 channel)
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
switch(priv->rf_chip)
switch (priv->rf_chip)
{
case RF_8256:
PHY_SetRF8256CCKTxPower(dev, powerlevel); //need further implement
......@@ -917,7 +917,7 @@ void rtl8192_phy_RFConfig(struct net_device *dev)
{
struct r8192_priv *priv = ieee80211_priv(dev);
switch(priv->rf_chip)
switch (priv->rf_chip)
{
case RF_8256:
PHY_RF8256_Config(dev);
......@@ -956,7 +956,7 @@ u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E
//u32* pRFArray;
u8 ret = 0;
switch(eRFPath){
switch (eRFPath){
case RF90_PATH_A:
for(i = 0;i<RadioA_ArrayLength; i=i+2){
......@@ -1026,7 +1026,7 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel)
u8 powerlevel = priv->TxPowerLevelCCK[channel-1];
u8 powerlevelOFDM24G = priv->TxPowerLevelOFDM24G[channel-1];
switch(priv->rf_chip)
switch (priv->rf_chip)
{
case RF_8225:
#ifdef TO_DO_LIST
......@@ -1071,10 +1071,10 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS
priv->SetRFPowerStateInProgress = true;
switch(priv->rf_chip)
switch (priv->rf_chip)
{
case RF_8256:
switch( eRFPowerState )
switch ( eRFPowerState )
{
case eRfOn:
//RF-A, RF-B
......@@ -1129,10 +1129,10 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS
{
// Update current RF state variable.
pHalData->eRFPowerState = eRFPowerState;
switch(pHalData->RFChipID )
switch (pHalData->RFChipID )
{
case RF_8256:
switch(pHalData->eRFPowerState)
switch (pHalData->eRFPowerState)
{
case eRfOff:
//
......@@ -1283,7 +1283,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u
// <3> Fill up RF dependent command.
RfDependCmdCnt = 0;
switch( priv->rf_chip )
switch ( priv->rf_chip )
{
case RF_8225:
if (!(channel >= 1 && channel <= 14))
......@@ -1321,7 +1321,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u
do{
switch(*stage)
switch (*stage)
{
case 0:
CurrentCmd=&PreCommonCmd[*step];
......@@ -1349,7 +1349,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u
}
}
switch(CurrentCmd->CmdID)
switch (CurrentCmd->CmdID)
{
case CmdID_SetTxPowerLevel:
if(priv->card_8192_version == (u8)VERSION_819xU_A) //xiong: consider it later!
......@@ -1452,7 +1452,7 @@ if (0) //to test current channel from RF reg 0x7.
}
}
//--------------------------------------------
switch(priv->ieee80211->mode)
switch (priv->ieee80211->mode)
{
case WIRELESS_MODE_A:
case WIRELESS_MODE_N_5G:
......@@ -1527,7 +1527,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
//<1>Set MAC register
regBwOpMode = read_nic_byte(dev, BW_OPMODE);
switch(priv->CurrentChannelBW)
switch (priv->CurrentChannelBW)
{
case HT_CHANNEL_WIDTH_20:
regBwOpMode |= BW_OPMODE_20MHZ;
......@@ -1547,7 +1547,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
}
//<2>Set PHY related register
switch(priv->CurrentChannelBW)
switch (priv->CurrentChannelBW)
{
case HT_CHANNEL_WIDTH_20:
// Add by Vivi 20071119
......@@ -1617,7 +1617,7 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev)
//Skip over setting of J-mode in BB register here. Default value is "None J mode". Emily 20070315
//<3>Set RF related register
switch( priv->rf_chip )
switch ( priv->rf_chip )
{
case RF_8225:
#ifdef TO_DO_LIST
......@@ -1704,7 +1704,7 @@ extern void InitialGainOperateWorkItemCallBack(struct work_struct *work)
Operation = priv->InitialGainOperateType;
switch(Operation)
switch (Operation)
{
case IG_Backup:
RT_TRACE(COMP_SCAN, "IG_Backup, backup the initial gain.\n");
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment