rtw88: coex: 8821c: correct antenna switch function

This patch fixes a defect that uses incorrect function to access
registers. Use 8 and 32 bit access function to access 8 and 32 bit long
data respectively.
Signed-off-by: Guo-Feng Fan <vincent_fann@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210202055012.8296-2-pkshih@realtek.com

drivers/net/wireless/realtek/rtw88/rtw8821c.c

@@ -719,8 +719,8 @@ static void rtw8821c_coex_cfg_ant_switch(struct rtw_dev *rtwdev, u8 ctrl_type,
 			regval = (!polarity_inverse ? 0x1 : 0x2);
 		}
 
-		rtw_write8_mask(rtwdev, REG_RFE_CTRL8, BIT_MASK_R_RFE_SEL_15,
-				regval);
+		rtw_write32_mask(rtwdev, REG_RFE_CTRL8, BIT_MASK_R_RFE_SEL_15,
+				 regval);
 		break;
 	case COEX_SWITCH_CTRL_BY_PTA:
 		rtw_write32_clr(rtwdev, REG_LED_CFG, BIT_DPDT_SEL_EN);
@@ -730,8 +730,8 @@ static void rtw8821c_coex_cfg_ant_switch(struct rtw_dev *rtwdev, u8 ctrl_type,
 				PTA_CTRL_PIN);
 
 		regval = (!polarity_inverse ? 0x2 : 0x1);
-		rtw_write8_mask(rtwdev, REG_RFE_CTRL8, BIT_MASK_R_RFE_SEL_15,
-				regval);
+		rtw_write32_mask(rtwdev, REG_RFE_CTRL8, BIT_MASK_R_RFE_SEL_15,
+				 regval);
 		break;
 	case COEX_SWITCH_CTRL_BY_ANTDIV:
 		rtw_write32_clr(rtwdev, REG_LED_CFG, BIT_DPDT_SEL_EN);
@@ -757,11 +757,11 @@ static void rtw8821c_coex_cfg_ant_switch(struct rtw_dev *rtwdev, u8 ctrl_type,
 	}
 
 	if (ctrl_type == COEX_SWITCH_CTRL_BY_BT) {
-		rtw_write32_clr(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE1);
-		rtw_write32_clr(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE2);
+		rtw_write8_clr(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE1);
+		rtw_write8_clr(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE2);
 	} else {
-		rtw_write32_set(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE1);
-		rtw_write32_set(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE2);
+		rtw_write8_set(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE1);
+		rtw_write8_set(rtwdev, REG_CTRL_TYPE, BIT_CTRL_TYPE2);
 	}
 }