Commit adc0950c authored by Atul Dahiya's avatar Atul Dahiya Committed by Ben Dooks

ARM: SAMSUNG: Move RTC device definitions in plat-samsung

This patch moves RTC device definitions from mach-s3c64xx
to plat-samsung, to enable the other SoCs to use same device
definition.
Signed-off-by: default avatarAtul Dahiya <atul.dahiya@samsung.com>
Signed-off-by: default avatarSangbeom Kim <sbkim73@samsung.com>
Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
parent 7ebd4675
......@@ -56,7 +56,6 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o
# device support
obj-y += dev-uart.o
obj-y += dev-rtc.o
obj-y += dev-audio.o
obj-$(CONFIG_S3C_ADC) += dev-adc.o
obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o
......@@ -103,5 +103,6 @@
#define S3C_PA_USBHOST S3C64XX_PA_USBHOST
#define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG
#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY
#define S3C_PA_RTC S3C64XX_PA_RTC
#endif /* __ASM_ARCH_6400_MAP_H */
......@@ -185,6 +185,11 @@ config S3C_DEV_NAND
help
Compile in platform device definition for NAND controller
config S3C_DEV_RTC
bool
help
Complie in platform device definition for RTC
config S3C64XX_DEV_SPI
bool
help
......
......@@ -40,6 +40,7 @@ obj-y += dev-uart.o
obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
# DMA support
......
/* linux/arch/arm/plat-s3c64xx/dev-rtc.c
/* linux/arch/arm/plat-samsung/dev-rtc.c
*
* Copyright 2009 by Maurus Cuelenaere <mcuelenaere@gmail.com>
*
......@@ -18,26 +18,26 @@
static struct resource s3c_rtc_resource[] = {
[0] = {
.start = S3C64XX_PA_RTC,
.end = S3C64XX_PA_RTC + 0xff,
.flags = IORESOURCE_MEM,
.start = S3C_PA_RTC,
.end = S3C_PA_RTC + 0xff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_RTC_ALARM,
.end = IRQ_RTC_ALARM,
.flags = IORESOURCE_IRQ,
.start = IRQ_RTC_ALARM,
.end = IRQ_RTC_ALARM,
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = IRQ_RTC_TIC,
.end = IRQ_RTC_TIC,
.flags = IORESOURCE_IRQ
.start = IRQ_RTC_TIC,
.end = IRQ_RTC_TIC,
.flags = IORESOURCE_IRQ
}
};
struct platform_device s3c_device_rtc = {
.name = "s3c64xx-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_rtc_resource),
.resource = s3c_rtc_resource,
.name = "s3c64xx-rtc",
.id = -1,
.num_resources = ARRAY_SIZE(s3c_rtc_resource),
.resource = s3c_rtc_resource,
};
EXPORT_SYMBOL(s3c_device_rtc);
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment