Skip to content

L
linux
Commit ae1dd9bc authored by Ebru Akagunduz's avatar Ebru Akagunduz Committed by Greg Kroah-Hartman
Browse files
Options

Staging: xillybus: quoted strings split across lines 

Fix checkpatch.pl issues with quoted strings split across lines in xillybus_core.c
Signed-off-by: default avatarEbru Akagunduz <ebru.akagunduz@gmail.com>
Reviewed-by: default avatarJosh Triplett <josh@joshtriplett.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 49100715
Hide whitespace changes
Inline Side-by-side
Showing with 25 additions and 59 deletions
drivers/staging/xillybus/xillybus_core.c
View file @ ae1dd9bc
......@@ -112,8 +112,7 @@ static void malformed_message(u32 *buf)
msg_bufno = (buf[0] >> 12) & 0x3ff;
msg_data = buf[1] & 0xfffffff;
pr_warn("xillybus: Malformed message (skipping): "
"opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
pr_warn("xillybus: Malformed message (skipping): opcode=%d, channel=%03x, dir=%d, bufno=%03x, data=%07x\n",
opcode, msg_channel, msg_dir, msg_bufno, msg_data);
}
......@@ -153,15 +152,13 @@ irqreturn_t xillybus_isr(int irq, void *data)
for (i = 0; i < buf_size; i += 2)
if (((buf[i+1] >> 28) & 0xf) != ep->msg_counter) {
malformed_message(&buf[i]);
pr_warn("xillybus: Sending a NACK on "
"counter %x (instead of %x) on entry %d\n",
pr_warn("xillybus: Sending a NACK on counter %x (instead of %x) on entry %d\n",
((buf[i+1] >> 28) & 0xf),
ep->msg_counter,
i/2);
if (++ep->failed_messages > 10)
pr_err("xillybus: Lost sync with "
"interrupt messages. Stopping.\n");
pr_err("xillybus: Lost sync with interrupt messages. Stopping.\n");
else {
ep->ephw->hw_sync_sgl_for_device(
ep,
......@@ -283,13 +280,7 @@ irqreturn_t xillybus_isr(int irq, void *data)
case XILLYMSG_OPCODE_FATAL_ERROR:
ep->fatal_error = 1;
wake_up_interruptible(&ep->ep_wait); /* For select() */
pr_err("xillybus: FPGA reported a fatal "
"error. This means that the low-level "
"communication with the device has failed. "
"This hardware problem is most likely "
"unrelated to xillybus (neither kernel "
"module nor FPGA core), but reports are "
"still welcome. All I/O is aborted.\n");
pr_err("xillybus: FPGA reported a fatal error. This means that the low-level communication with the device has failed. This hardware problem is most likely unrelated to xillybus (neither kernel module nor FPGA core), but reports are still welcome. All I/O is aborted.\n");
break;
default:
malformed_message(&buf[i]);
......@@ -486,8 +477,7 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
if ((channelnum > ep->num_channels) ||
((channelnum == 0) && !is_writebuf)) {
pr_err("xillybus: IDT requests channel out "
"of range. Aborting.\n");
pr_err("xillybus: IDT requests channel out of range. Aborting.\n");
return -ENODEV;
}
......@@ -565,9 +555,7 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
*/
if ((left_of_wr_salami < bytebufsize) &&
(left_of_wr_salami > 0)) {
pr_err("xillybus: "
"Corrupt buffer allocation "
"in IDT. Aborting.\n");
pr_err("xillybus: Corrupt buffer allocation in IDT. Aborting.\n");
return -ENODEV;
}
......@@ -644,9 +632,7 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
*/
if ((left_of_rd_salami < bytebufsize) &&
(left_of_rd_salami > 0)) {
pr_err("xillybus: "
"Corrupt buffer allocation "
"in IDT. Aborting.\n");
pr_err("xillybus: Corrupt buffer allocation in IDT. Aborting.\n");
return -ENODEV;
}
......@@ -706,16 +692,14 @@ static int xilly_setupchannels(struct xilly_endpoint *ep,
}
if (!msg_buf_done) {
pr_err("xillybus: Corrupt IDT: No message buffer. "
"Aborting.\n");
pr_err("xillybus: Corrupt IDT: No message buffer. Aborting.\n");
return -ENODEV;
}
return 0;
memfail:
pr_err("xillybus: Failed to allocate write buffer memory. "
"Aborting.\n");
pr_err("xillybus: Failed to allocate write buffer memory. Aborting.\n");
return -ENOMEM;
dmafail:
pr_err("xillybus: Failed to map DMA memory!. Aborting.\n");
......@@ -745,8 +729,7 @@ static void xilly_scan_idt(struct xilly_endpoint *endpoint,
scan++;
if (scan > end_of_idt) {
pr_err("xillybus: IDT device name list overflow. "
"Aborting.\n");
pr_err("xillybus: IDT device name list overflow. Aborting.\n");
idt_handle->chandesc = NULL;
return;
} else
......@@ -757,8 +740,7 @@ static void xilly_scan_idt(struct xilly_endpoint *endpoint,
if (len & 0x03) {
idt_handle->chandesc = NULL;
pr_err("xillybus: Corrupt IDT device name list. "
"Aborting.\n");
pr_err("xillybus: Corrupt IDT device name list. Aborting.\n");
}
idt_handle->entries = len >> 2;
......@@ -803,8 +785,7 @@ static int xilly_obtain_idt(struct xilly_endpoint *endpoint)
DMA_FROM_DEVICE);
if (channel->wr_buffers[0]->end_offset != endpoint->idtlen) {
pr_err("xillybus: IDT length mismatch (%d != %d). "
"Aborting.\n",
pr_err("xillybus: IDT length mismatch (%d != %d). Aborting.\n",
channel->wr_buffers[0]->end_offset, endpoint->idtlen);
rc = -ENODEV;
return rc;
......@@ -821,9 +802,7 @@ static int xilly_obtain_idt(struct xilly_endpoint *endpoint)
/* Check version number. Accept anything below 0x82 for now. */
if (*version > 0x82) {
pr_err("xillybus: No support for IDT version 0x%02x. "
"Maybe the xillybus driver needs an upgarde. "
"Aborting.\n",
pr_err("xillybus: No support for IDT version 0x%02x. Maybe the xillybus driver needs an upgarde. Aborting.\n",
(int) *version);
rc = -ENODEV;
return rc;
......@@ -1312,9 +1291,7 @@ static int xillybus_myflush(struct xilly_channel *channel, long timeout)
channel->rd_wait,
(!channel->rd_full),
timeout) == 0) {
pr_warn("xillybus: "
"Timed out while flushing. "
"Output data may be lost.\n");
pr_warn("xillybus: Timed out while flushing. Output data may be lost.\n");
rc = -ETIMEDOUT;
break;
......@@ -1354,11 +1331,9 @@ static void xillybus_autoflush(struct work_struct *work)
rc = xillybus_myflush(channel, -1);
if (rc == -EINTR)
pr_warn("xillybus: Autoflush failed because "
"work queue thread got a signal.\n");
pr_warn("xillybus: Autoflush failed because work queue thread got a signal.\n");
else if (rc)
pr_err("xillybus: Autoflush failed under "
"weird circumstances.\n");
pr_err("xillybus: Autoflush failed under weird circumstances.\n");
}
......@@ -1615,8 +1590,8 @@ static int xillybus_open(struct inode *inode, struct file *filp)
mutex_unlock(&ep_list_lock);
if (!endpoint) {
pr_err("xillybus: open() failed to find a device "
"for major=%d and minor=%d\n", major, minor);
pr_err("xillybus: open() failed to find a device for major=%d and minor=%d\n",
major, minor);
return -ENODEV;
}
......@@ -1642,15 +1617,13 @@ static int xillybus_open(struct inode *inode, struct file *filp)
if ((filp->f_mode & FMODE_READ) && (filp->f_flags & O_NONBLOCK) &&
(channel->wr_synchronous || !channel->wr_allow_partial ||
!channel->wr_supports_nonempty)) {
pr_err("xillybus: open() failed: "
"O_NONBLOCK not allowed for read on this device\n");
pr_err("xillybus: open() failed: O_NONBLOCK not allowed for read on this device\n");
return -ENODEV;
}
if ((filp->f_mode & FMODE_WRITE) && (filp->f_flags & O_NONBLOCK) &&
(channel->rd_synchronous || !channel->rd_allow_partial)) {
pr_err("xillybus: open() failed: "
"O_NONBLOCK not allowed for write on this device\n");
pr_err("xillybus: open() failed: O_NONBLOCK not allowed for write on this device\n");
return -ENODEV;
}
......@@ -1765,8 +1738,7 @@ static int xillybus_release(struct inode *inode, struct file *filp)
rc = mutex_lock_interruptible(&channel->rd_mutex);
if (rc) {
pr_warn("xillybus: Failed to close file. "
"Hardware left in messy state.\n");
pr_warn("xillybus: Failed to close file. Hardware left in messy state.\n");
return rc;
}
......@@ -1791,8 +1763,7 @@ static int xillybus_release(struct inode *inode, struct file *filp)
if (filp->f_mode & FMODE_READ) {
rc = mutex_lock_interruptible(&channel->wr_mutex);
if (rc) {
pr_warn("xillybus: Failed to close file. "
"Hardware left in messy state.\n");
pr_warn("xillybus: Failed to close file. Hardware left in messy state.\n");
return rc;
}
......@@ -1853,10 +1824,7 @@ static int xillybus_release(struct inode *inode, struct file *filp)
if (channel->wr_sleepy) {
mutex_unlock(&channel->wr_mutex);
pr_warn("xillybus: Hardware failed to "
"respond to close command, "
"therefore left in "
"messy state.\n");
pr_warn("xillybus: Hardware failed to respond to close command, therefore left in messy state.\n");
return -EINTR;
}
}
......@@ -2057,8 +2025,7 @@ static int xillybus_init_chrdev(struct xilly_endpoint *endpoint,
"%s", devname);
if (IS_ERR(device)) {
pr_warn("xillybus: Failed to create %s "
"device. Aborting.\n", devname);
pr_warn("xillybus: Failed to create %s device. Aborting.\n", devname);
goto error3;
}
}
......@@ -2141,8 +2108,7 @@ static int xilly_quiesce(struct xilly_endpoint *endpoint)
XILLY_TIMEOUT);
if (endpoint->idtlen < 0) {
pr_err("xillybus: Failed to quiesce the device on "
"exit. Quitting while leaving a mess.\n");
pr_err("xillybus: Failed to quiesce the device on exit. Quitting while leaving a mess.\n");
return -ENODEV;
}
return 0; /* Success */
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7