Commit ae843332 authored by Zhang Rui's avatar Zhang Rui Committed by Len Brown

ACPI: Set fake hid for non-PNPID ACPI devices

We do this mainly because:
1.	hid is used to match ACPI devices and drivers.
	.match method which is incompatible to driver model
	can be deleted from acpi_driver.ops then.
2.	As the .uevent method mark ACPI drivers by PNPID,
	fake hid is set to non-PNPID devices so that udev script
	can load the right ACPI driver by looking for
	"HWID = " or "COMPTID = ".
Signed-off-by: default avatarZhang Rui <rui.zhang@intel.com>
Signed-off-by: default avatarLen Brown <len.brown@intel.com>
parent db3e1cc3
......@@ -379,32 +379,16 @@ acpi_pci_bind_root(struct acpi_device *device,
static int acpi_pci_bridge_add(struct acpi_device *device);
static int acpi_pci_bridge_remove(struct acpi_device *device, int type);
static int acpi_pci_bridge_match(struct acpi_device *device,
struct acpi_driver *driver);
static struct acpi_driver acpi_pci_bridge_driver = {
.name = ACPI_PCI_BRIDGE_DRIVER_NAME,
.ids = ACPI_PCI_BRIDGE_HID,
.ops = {
.add = acpi_pci_bridge_add,
.remove = acpi_pci_bridge_remove,
.match = acpi_pci_bridge_match,
},
};
static int acpi_pci_bridge_match(struct acpi_device *device,
struct acpi_driver *driver)
{
acpi_status status;
acpi_handle handle;
/* pci bridge has _PRT but isn't PNP0A03 */
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_FAILURE(status))
return -ENODEV;
if (!acpi_match_ids(device, "PNP0A03"))
return -ENODEV;
return 0;
}
static int acpi_pci_bridge_add(struct acpi_device *device)
{
return acpi_pci_bind(device);
......
......@@ -166,8 +166,6 @@ static int acpi_bus_match(struct device *dev, struct device_driver *drv)
struct acpi_device *acpi_dev = to_acpi_device(dev);
struct acpi_driver *acpi_drv = to_acpi_driver(drv);
if (acpi_drv->ops.match)
return !acpi_drv->ops.match(acpi_dev, acpi_drv);
return !acpi_match_ids(acpi_dev, acpi_drv->ids);
}
......@@ -706,6 +704,53 @@ static void acpi_device_get_busid(struct acpi_device *device,
}
}
static int
acpi_video_bus_match(struct acpi_device *device)
{
acpi_handle h_dummy1;
acpi_handle h_dummy2;
acpi_handle h_dummy3;
if (!device)
return -EINVAL;
/* Since there is no HID, CID for ACPI Video drivers, we have
* to check well known required nodes for each feature we support.
*/
/* Does this device able to support video switching ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
return 0;
/* Does this device able to retrieve a video ROM ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
return 0;
/* Does this device able to configure which video head to be POSTed ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
return 0;
return -ENODEV;
}
static int acpi_pci_bridge_match(struct acpi_device *device)
{
acpi_status status;
acpi_handle handle;
/* pci bridge has _PRT but isn't PNP0A03 */
status = acpi_get_handle(device->handle, METHOD_NAME__PRT, &handle);
if (ACPI_FAILURE(status))
return -ENODEV;
if (!acpi_match_ids(device, "PNP0A03"))
return -ENODEV;
return 0;
}
static void acpi_device_set_id(struct acpi_device *device,
struct acpi_device *parent, acpi_handle handle,
int type)
......@@ -736,6 +781,16 @@ static void acpi_device_set_id(struct acpi_device *device,
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
if(!(info->valid & (ACPI_VALID_HID | ACPI_VALID_CID))){
status = acpi_video_bus_match(device);
if(ACPI_SUCCESS(status))
hid = ACPI_VIDEO_HID;
status = acpi_pci_bridge_match(device);
if(ACPI_SUCCESS(status))
hid = ACPI_PCI_BRIDGE_HID;
}
break;
case ACPI_BUS_TYPE_POWER:
hid = ACPI_POWER_HID;
......
......@@ -65,16 +65,14 @@ MODULE_LICENSE("GPL");
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
static int acpi_video_bus_match(struct acpi_device *device,
struct acpi_driver *driver);
static struct acpi_driver acpi_video_bus = {
.name = ACPI_VIDEO_DRIVER_NAME,
.class = ACPI_VIDEO_CLASS,
.ids = ACPI_VIDEO_HID,
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
.match = acpi_video_bus_match,
},
};
......@@ -1774,39 +1772,6 @@ static int acpi_video_bus_remove(struct acpi_device *device, int type)
return 0;
}
static int
acpi_video_bus_match(struct acpi_device *device, struct acpi_driver *driver)
{
acpi_handle h_dummy1;
acpi_handle h_dummy2;
acpi_handle h_dummy3;
if (!device || !driver)
return -EINVAL;
/* Since there is no HID, CID for ACPI Video drivers, we have
* to check well known required nodes for each feature we support.
*/
/* Does this device able to support video switching ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
return 0;
/* Does this device able to retrieve a video ROM ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
return 0;
/* Does this device able to configure which video head to be POSTed ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
return 0;
return -ENODEV;
}
static int __init acpi_video_init(void)
{
int result = 0;
......
......@@ -97,8 +97,6 @@ typedef int (*acpi_op_resume) (struct acpi_device * device);
typedef int (*acpi_op_scan) (struct acpi_device * device);
typedef int (*acpi_op_bind) (struct acpi_device * device);
typedef int (*acpi_op_unbind) (struct acpi_device * device);
typedef int (*acpi_op_match) (struct acpi_device * device,
struct acpi_driver * driver);
typedef int (*acpi_op_shutdown) (struct acpi_device * device);
struct acpi_bus_ops {
......@@ -112,9 +110,8 @@ struct acpi_bus_ops {
u32 acpi_op_scan:1;
u32 acpi_op_bind:1;
u32 acpi_op_unbind:1;
u32 acpi_op_match:1;
u32 acpi_op_shutdown:1;
u32 reserved:20;
u32 reserved:21;
};
struct acpi_device_ops {
......@@ -128,7 +125,6 @@ struct acpi_device_ops {
acpi_op_scan scan;
acpi_op_bind bind;
acpi_op_unbind unbind;
acpi_op_match match;
acpi_op_shutdown shutdown;
};
......
......@@ -43,6 +43,8 @@
#define ACPI_BUTTON_HID_POWERF "ACPI_FPB"
#define ACPI_BUTTON_HID_SLEEPF "ACPI_FSB"
#define ACPI_VIDEO_HID "ACPI_VID"
#define ACPI_PCI_BRIDGE_HID "ACPI_PCI"
/* --------------------------------------------------------------------------
PCI
-------------------------------------------------------------------------- */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment