Merge branch 'net-stmmac-cleanups'

Russell King says:

====================
net: stmmac: cleanups

This series removes various redundant items in the stmmac driver:

- the unused TBI and RTBI PCS flags
- the NULL pointer initialisations for PCS methods in dwxgmac2
- the stmmac_pcs_rane() method which is never called, and it's
  associated implementations
- the redundant netif_carrier_off()s

Finally, it replaces asm/io.h with the preferred linux/io.h.
====================

Link: https://lore.kernel.org/r/Zlbp7xdUZAXblOZJ@shell.armlinux.org.ukSigned-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/stmicro/stmmac/common.h

@@ -271,8 +271,6 @@ struct stmmac_safety_stats {
 /* PCS defines */
 #define STMMAC_PCS_RGMII	(1 << 0)
 #define STMMAC_PCS_SGMII	(1 << 1)
-#define STMMAC_PCS_TBI		(1 << 2)
-#define STMMAC_PCS_RTBI		(1 << 3)
 
 #define SF_DMA_MODE 1		/* DMA STORE-AND-FORWARD Operation Mode */
 

drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c

@@ -605,6 +605,14 @@ static int ethqos_configure_rgmii(struct qcom_ethqos *ethqos)
 	return 0;
 }
 
+static void ethqos_set_serdes_speed(struct qcom_ethqos *ethqos, int speed)
+{
+	if (ethqos->serdes_speed != speed) {
+		phy_set_speed(ethqos->serdes_phy, speed);
+		ethqos->serdes_speed = speed;
+	}
+}
+
 /* On interface toggle MAC registers gets reset.
  * Configure MAC block for SGMII on ethernet phy link up
  */
@@ -622,9 +630,7 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
-		if (ethqos->serdes_speed != SPEED_2500)
-			phy_set_speed(ethqos->serdes_phy, SPEED_2500);
-		ethqos->serdes_speed = SPEED_2500;
+		ethqos_set_serdes_speed(ethqos, SPEED_2500);
 		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 0, 0, 0);
 		break;
 	case SPEED_1000:
@@ -632,16 +638,12 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 		rgmii_updatel(ethqos, RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_CONFIG2_RGMII_CLK_SEL_CFG,
 			      RGMII_IO_MACRO_CONFIG2);
-		if (ethqos->serdes_speed != SPEED_1000)
-			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
-		ethqos->serdes_speed = SPEED_1000;
+		ethqos_set_serdes_speed(ethqos, SPEED_1000);
 		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	case SPEED_100:
 		val |= ETHQOS_MAC_CTRL_PORT_SEL | ETHQOS_MAC_CTRL_SPEED_MODE;
-		if (ethqos->serdes_speed != SPEED_1000)
-			phy_set_speed(ethqos->serdes_phy, SPEED_1000);
-		ethqos->serdes_speed = SPEED_1000;
+		ethqos_set_serdes_speed(ethqos, SPEED_1000);
 		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	case SPEED_10:
@@ -651,9 +653,7 @@ static int ethqos_configure_sgmii(struct qcom_ethqos *ethqos)
 			      FIELD_PREP(RGMII_CONFIG_SGMII_CLK_DVDR,
 					 SGMII_10M_RX_CLK_DVDR),
 			      RGMII_IO_MACRO_CONFIG);
-		if (ethqos->serdes_speed != SPEED_1000)
-			phy_set_speed(ethqos->serdes_phy, ethqos->speed);
-		ethqos->serdes_speed = SPEED_1000;
+		ethqos_set_serdes_speed(ethqos, SPEED_1000);
 		stmmac_pcs_ctrl_ane(priv, priv->ioaddr, 1, 0, 0);
 		break;
 	}

drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c

@@ -15,7 +15,7 @@
 #include <linux/crc32.h>
 #include <linux/slab.h>
 #include <linux/ethtool.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "stmmac.h"
 #include "stmmac_pcs.h"
 #include "dwmac1000.h"
@@ -404,11 +404,6 @@ static void dwmac1000_ctrl_ane(void __iomem *ioaddr, bool ane, bool srgmi_ral,
 	dwmac_ctrl_ane(ioaddr, GMAC_PCS_BASE, ane, srgmi_ral, loopback);
 }
 
-static void dwmac1000_rane(void __iomem *ioaddr, bool restart)
-{
-	dwmac_rane(ioaddr, GMAC_PCS_BASE, restart);
-}
-
 static void dwmac1000_get_adv_lp(void __iomem *ioaddr, struct rgmii_adv *adv)
 {
 	dwmac_get_adv_lp(ioaddr, GMAC_PCS_BASE, adv);
@@ -519,7 +514,6 @@ const struct stmmac_ops dwmac1000_ops = {
 	.set_eee_pls = dwmac1000_set_eee_pls,
 	.debug = dwmac1000_debug,
 	.pcs_ctrl_ane = dwmac1000_ctrl_ane,
-	.pcs_rane = dwmac1000_rane,
 	.pcs_get_adv_lp = dwmac1000_get_adv_lp,
 	.set_mac_loopback = dwmac1000_set_mac_loopback,
 };

drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c

@@ -12,7 +12,7 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include "dwmac1000.h"
 #include "dwmac_dma.h"
 

drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c

@@ -15,7 +15,7 @@
 *******************************************************************************/
 
 #include <linux/crc32.h>
-#include <asm/io.h>
+#include <linux/io.h>
 #include "stmmac.h"
 #include "dwmac100.h"
 

drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c

@@ -14,7 +14,7 @@
   Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
 *******************************************************************************/
 
-#include <asm/io.h>
+#include <linux/io.h>
 #include "dwmac100.h"
 #include "dwmac_dma.h"
 

drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c

@@ -758,11 +758,6 @@ static void dwmac4_ctrl_ane(void __iomem *ioaddr, bool ane, bool srgmi_ral,
 	dwmac_ctrl_ane(ioaddr, GMAC_PCS_BASE, ane, srgmi_ral, loopback);
 }
 
-static void dwmac4_rane(void __iomem *ioaddr, bool restart)
-{
-	dwmac_rane(ioaddr, GMAC_PCS_BASE, restart);
-}
-
 static void dwmac4_get_adv_lp(void __iomem *ioaddr, struct rgmii_adv *adv)
 {
 	dwmac_get_adv_lp(ioaddr, GMAC_PCS_BASE, adv);
@@ -1215,7 +1210,6 @@ const struct stmmac_ops dwmac4_ops = {
 	.set_eee_timer = dwmac4_set_eee_timer,
 	.set_eee_pls = dwmac4_set_eee_pls,
 	.pcs_ctrl_ane = dwmac4_ctrl_ane,
-	.pcs_rane = dwmac4_rane,
 	.pcs_get_adv_lp = dwmac4_get_adv_lp,
 	.debug = dwmac4_debug,
 	.set_filter = dwmac4_set_filter,
@@ -1260,7 +1254,6 @@ const struct stmmac_ops dwmac410_ops = {
 	.set_eee_timer = dwmac4_set_eee_timer,
 	.set_eee_pls = dwmac4_set_eee_pls,
 	.pcs_ctrl_ane = dwmac4_ctrl_ane,
-	.pcs_rane = dwmac4_rane,
 	.pcs_get_adv_lp = dwmac4_get_adv_lp,
 	.debug = dwmac4_debug,
 	.set_filter = dwmac4_set_filter,
@@ -1309,7 +1302,6 @@ const struct stmmac_ops dwmac510_ops = {
 	.set_eee_timer = dwmac4_set_eee_timer,
 	.set_eee_pls = dwmac4_set_eee_pls,
 	.pcs_ctrl_ane = dwmac4_ctrl_ane,
-	.pcs_rane = dwmac4_rane,
 	.pcs_get_adv_lp = dwmac4_get_adv_lp,
 	.debug = dwmac4_debug,
 	.set_filter = dwmac4_set_filter,

drivers/net/ethernet/stmicro/stmmac/dwxgmac2_core.c

@@ -1554,9 +1554,6 @@ const struct stmmac_ops dwxgmac210_ops = {
 	.reset_eee_mode = dwxgmac2_reset_eee_mode,
 	.set_eee_timer = dwxgmac2_set_eee_timer,
 	.set_eee_pls = dwxgmac2_set_eee_pls,
-	.pcs_ctrl_ane = NULL,
-	.pcs_rane = NULL,
-	.pcs_get_adv_lp = NULL,
 	.debug = NULL,
 	.set_filter = dwxgmac2_set_filter,
 	.safety_feat_config = dwxgmac3_safety_feat_config,
@@ -1614,9 +1611,6 @@ const struct stmmac_ops dwxlgmac2_ops = {
 	.reset_eee_mode = dwxgmac2_reset_eee_mode,
 	.set_eee_timer = dwxgmac2_set_eee_timer,
 	.set_eee_pls = dwxgmac2_set_eee_pls,
-	.pcs_ctrl_ane = NULL,
-	.pcs_rane = NULL,
-	.pcs_get_adv_lp = NULL,
 	.debug = NULL,
 	.set_filter = dwxgmac2_set_filter,
 	.safety_feat_config = dwxgmac3_safety_feat_config,

drivers/net/ethernet/stmicro/stmmac/hwif.h

@@ -370,7 +370,6 @@ struct stmmac_ops {
 	/* PCS calls */
 	void (*pcs_ctrl_ane)(void __iomem *ioaddr, bool ane, bool srgmi_ral,
 			     bool loopback);
-	void (*pcs_rane)(void __iomem *ioaddr, bool restart);
 	void (*pcs_get_adv_lp)(void __iomem *ioaddr, struct rgmii_adv *adv);
 	/* Safety Features */
 	int (*safety_feat_config)(void __iomem *ioaddr, unsigned int asp,
@@ -484,8 +483,6 @@ struct stmmac_ops {
 	stmmac_do_void_callback(__priv, mac, debug, __priv, __args)
 #define stmmac_pcs_ctrl_ane(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, pcs_ctrl_ane, __args)
-#define stmmac_pcs_rane(__priv, __args...) \
-	stmmac_do_void_callback(__priv, mac, pcs_rane, __priv, __args)
 #define stmmac_pcs_get_adv_lp(__priv, __args...) \
 	stmmac_do_void_callback(__priv, mac, pcs_get_adv_lp, __args)
 #define stmmac_safety_feat_config(__priv, __args...) \

drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c

@@ -11,10 +11,10 @@
 #include <linux/etherdevice.h>
 #include <linux/ethtool.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/mii.h>
 #include <linux/phylink.h>
 #include <linux/net_tstamp.h>
-#include <asm/io.h>
 
 #include "stmmac.h"
 #include "dwmac_dma.h"

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

@@ -471,13 +471,6 @@ bool stmmac_eee_init(struct stmmac_priv *priv)
 {
 	int eee_tw_timer = priv->eee_tw_timer;
 
-	/* Using PCS we cannot dial with the phy registers at this stage
-	 * so we do not support extra feature like EEE.
-	 */
-	if (priv->hw->pcs == STMMAC_PCS_TBI ||
-	    priv->hw->pcs == STMMAC_PCS_RTBI)
-		return false;
-
 	/* Check if MAC core supports the EEE feature. */
 	if (!priv->dma_cap.eee)
 		return false;
@@ -3953,9 +3946,7 @@ static int __stmmac_open(struct net_device *dev,
 	if (ret < 0)
 		return ret;
 
-	if (priv->hw->pcs != STMMAC_PCS_TBI &&
-	    priv->hw->pcs != STMMAC_PCS_RTBI &&
-	    (!priv->hw->xpcs ||
+	if ((!priv->hw->xpcs ||
 	     xpcs_get_an_mode(priv->hw->xpcs, mode) != DW_AN_C73)) {
 		ret = stmmac_init_phy(dev);
 		if (ret) {
@@ -4097,8 +4088,6 @@ static int stmmac_release(struct net_device *dev)
 	if (priv->plat->serdes_powerdown)
 		priv->plat->serdes_powerdown(dev, priv->plat->bsp_priv);
 
-	netif_carrier_off(dev);
-
 	stmmac_release_ptp(priv);
 
 	pm_runtime_put(priv->device);
@@ -7739,16 +7728,12 @@ int stmmac_dvr_probe(struct device *device,
 	if (!pm_runtime_enabled(device))
 		pm_runtime_enable(device);
 
-	if (priv->hw->pcs != STMMAC_PCS_TBI &&
-	    priv->hw->pcs != STMMAC_PCS_RTBI) {
-		/* MDIO bus Registration */
-		ret = stmmac_mdio_register(ndev);
-		if (ret < 0) {
-			dev_err_probe(priv->device, ret,
-				      "%s: MDIO bus (id: %d) registration failed\n",
-				      __func__, priv->plat->bus_id);
-			goto error_mdio_register;
-		}
+	ret = stmmac_mdio_register(ndev);
+	if (ret < 0) {
+		dev_err_probe(priv->device, ret,
+			      "MDIO bus (id: %d) registration failed\n",
+			      priv->plat->bus_id);
+		goto error_mdio_register;
 	}
 
 	if (priv->plat->speed_mode_2500)
@@ -7790,9 +7775,7 @@ int stmmac_dvr_probe(struct device *device,
 error_phy_setup:
 	stmmac_pcs_clean(ndev);
 error_pcs_setup:
-	if (priv->hw->pcs != STMMAC_PCS_TBI &&
-	    priv->hw->pcs != STMMAC_PCS_RTBI)
-		stmmac_mdio_unregister(ndev);
+	stmmac_mdio_unregister(ndev);
 error_mdio_register:
 	stmmac_napi_del(ndev);
 error_hw_init:
@@ -7821,7 +7804,6 @@ void stmmac_dvr_remove(struct device *dev)
 
 	stmmac_stop_all_dma(priv);
 	stmmac_mac_set(priv, priv->ioaddr, false);
-	netif_carrier_off(ndev);
 	unregister_netdev(ndev);
 
 #ifdef CONFIG_DEBUG_FS
@@ -7833,10 +7815,8 @@ void stmmac_dvr_remove(struct device *dev)
 	reset_control_assert(priv->plat->stmmac_ahb_rst);
 
 	stmmac_pcs_clean(ndev);
+	stmmac_mdio_unregister(ndev);
 
-	if (priv->hw->pcs != STMMAC_PCS_TBI &&
-	    priv->hw->pcs != STMMAC_PCS_RTBI)
-		stmmac_mdio_unregister(ndev);
 	destroy_workqueue(priv->wq);
 	mutex_destroy(&priv->lock);
 	bitmap_free(priv->af_xdp_zc_qps);

drivers/net/ethernet/stmicro/stmmac/stmmac_pcs.h

@@ -74,23 +74,6 @@ static inline void dwmac_pcs_isr(void __iomem *ioaddr, u32 reg,
 	}
 }
 
-/**
- * dwmac_rane - To restart ANE
- * @ioaddr: IO registers pointer
- * @reg: Base address of the AN Control Register.
- * @restart: to restart ANE
- * Description: this is to just restart the Auto-Negotiation.
- */
-static inline void dwmac_rane(void __iomem *ioaddr, u32 reg, bool restart)
-{
-	u32 value = readl(ioaddr + GMAC_AN_CTRL(reg));
-
-	if (restart)
-		value |= GMAC_AN_CTRL_RAN;
-
-	writel(value, ioaddr + GMAC_AN_CTRL(reg));
-}
-
 /**
  * dwmac_ctrl_ane - To program the AN Control Register.
  * @ioaddr: IO registers pointer