ice: Add support for new PHY types

This patch adds code for the detection and operation of several
additional PHY types that support higher link speeds.
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/ice/ice_adminq_cmd.h

@@ -847,7 +847,42 @@ struct ice_aqc_get_phy_caps {
 #define ICE_PHY_TYPE_LOW_40GBASE_KR4		BIT_ULL(33)
 #define ICE_PHY_TYPE_LOW_40G_XLAUI_AOC_ACC	BIT_ULL(34)
 #define ICE_PHY_TYPE_LOW_40G_XLAUI		BIT_ULL(35)
+#define ICE_PHY_TYPE_LOW_50GBASE_CR2		BIT_ULL(36)
+#define ICE_PHY_TYPE_LOW_50GBASE_SR2		BIT_ULL(37)
+#define ICE_PHY_TYPE_LOW_50GBASE_LR2		BIT_ULL(38)
+#define ICE_PHY_TYPE_LOW_50GBASE_KR2		BIT_ULL(39)
+#define ICE_PHY_TYPE_LOW_50G_LAUI2_AOC_ACC	BIT_ULL(40)
+#define ICE_PHY_TYPE_LOW_50G_LAUI2		BIT_ULL(41)
+#define ICE_PHY_TYPE_LOW_50G_AUI2_AOC_ACC	BIT_ULL(42)
+#define ICE_PHY_TYPE_LOW_50G_AUI2		BIT_ULL(43)
+#define ICE_PHY_TYPE_LOW_50GBASE_CP		BIT_ULL(44)
+#define ICE_PHY_TYPE_LOW_50GBASE_SR		BIT_ULL(45)
+#define ICE_PHY_TYPE_LOW_50GBASE_FR		BIT_ULL(46)
+#define ICE_PHY_TYPE_LOW_50GBASE_LR		BIT_ULL(47)
+#define ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4	BIT_ULL(48)
+#define ICE_PHY_TYPE_LOW_50G_AUI1_AOC_ACC	BIT_ULL(49)
+#define ICE_PHY_TYPE_LOW_50G_AUI1		BIT_ULL(50)
+#define ICE_PHY_TYPE_LOW_100GBASE_CR4		BIT_ULL(51)
+#define ICE_PHY_TYPE_LOW_100GBASE_SR4		BIT_ULL(52)
+#define ICE_PHY_TYPE_LOW_100GBASE_LR4		BIT_ULL(53)
+#define ICE_PHY_TYPE_LOW_100GBASE_KR4		BIT_ULL(54)
+#define ICE_PHY_TYPE_LOW_100G_CAUI4_AOC_ACC	BIT_ULL(55)
+#define ICE_PHY_TYPE_LOW_100G_CAUI4		BIT_ULL(56)
+#define ICE_PHY_TYPE_LOW_100G_AUI4_AOC_ACC	BIT_ULL(57)
+#define ICE_PHY_TYPE_LOW_100G_AUI4		BIT_ULL(58)
+#define ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4	BIT_ULL(59)
+#define ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4	BIT_ULL(60)
+#define ICE_PHY_TYPE_LOW_100GBASE_CP2		BIT_ULL(61)
+#define ICE_PHY_TYPE_LOW_100GBASE_SR2		BIT_ULL(62)
+#define ICE_PHY_TYPE_LOW_100GBASE_DR		BIT_ULL(63)
 #define ICE_PHY_TYPE_LOW_MAX_INDEX		63
+/* The second set of defines is for phy_type_high. */
+#define ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4	BIT_ULL(0)
+#define ICE_PHY_TYPE_HIGH_100G_CAUI2_AOC_ACC	BIT_ULL(1)
+#define ICE_PHY_TYPE_HIGH_100G_CAUI2		BIT_ULL(2)
+#define ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC	BIT_ULL(3)
+#define ICE_PHY_TYPE_HIGH_100G_AUI2		BIT_ULL(4)
+#define ICE_PHY_TYPE_HIGH_MAX_INDEX		19
 
 struct ice_aqc_get_phy_caps_data {
 	__le64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
@@ -1025,10 +1060,12 @@ struct ice_aqc_get_link_status_data {
 #define ICE_AQ_LINK_SPEED_20GB		BIT(6)
 #define ICE_AQ_LINK_SPEED_25GB		BIT(7)
 #define ICE_AQ_LINK_SPEED_40GB		BIT(8)
+#define ICE_AQ_LINK_SPEED_50GB		BIT(9)
+#define ICE_AQ_LINK_SPEED_100GB		BIT(10)
 #define ICE_AQ_LINK_SPEED_UNKNOWN	BIT(15)
 	__le32 reserved3; /* Aligns next field to 8-byte boundary */
 	__le64 phy_type_low; /* Use values from ICE_PHY_TYPE_LOW_* */
-	__le64 reserved4;
+	__le64 phy_type_high; /* Use values from ICE_PHY_TYPE_HIGH_* */
 };
 
 /* Set event mask command (direct 0x0613) */

drivers/net/ethernet/intel/ice/ice_common.c

@@ -165,8 +165,10 @@ ice_aq_get_phy_caps(struct ice_port_info *pi, bool qual_mods, u8 report_mode,
 	cmd->param0 |= cpu_to_le16(report_mode);
 	status = ice_aq_send_cmd(pi->hw, &desc, pcaps, pcaps_size, cd);
 
-	if (!status && report_mode == ICE_AQC_REPORT_TOPO_CAP)
+	if (!status && report_mode == ICE_AQC_REPORT_TOPO_CAP) {
 		pi->phy.phy_type_low = le64_to_cpu(pcaps->phy_type_low);
+		pi->phy.phy_type_high = le64_to_cpu(pcaps->phy_type_high);
+	}
 
 	return status;
 }
@@ -183,6 +185,9 @@ static enum ice_media_type ice_get_media_type(struct ice_port_info *pi)
 		return ICE_MEDIA_UNKNOWN;
 
 	hw_link_info = &pi->phy.link_info;
+	if (hw_link_info->phy_type_low && hw_link_info->phy_type_high)
+		/* If more than one media type is selected, report unknown */
+		return ICE_MEDIA_UNKNOWN;
 
 	if (hw_link_info->phy_type_low) {
 		switch (hw_link_info->phy_type_low) {
@@ -196,6 +201,15 @@ static enum ice_media_type ice_get_media_type(struct ice_port_info *pi)
 		case ICE_PHY_TYPE_LOW_25G_AUI_C2C:
 		case ICE_PHY_TYPE_LOW_40GBASE_SR4:
 		case ICE_PHY_TYPE_LOW_40GBASE_LR4:
+		case ICE_PHY_TYPE_LOW_50GBASE_SR2:
+		case ICE_PHY_TYPE_LOW_50GBASE_LR2:
+		case ICE_PHY_TYPE_LOW_50GBASE_SR:
+		case ICE_PHY_TYPE_LOW_50GBASE_FR:
+		case ICE_PHY_TYPE_LOW_50GBASE_LR:
+		case ICE_PHY_TYPE_LOW_100GBASE_SR4:
+		case ICE_PHY_TYPE_LOW_100GBASE_LR4:
+		case ICE_PHY_TYPE_LOW_100GBASE_SR2:
+		case ICE_PHY_TYPE_LOW_100GBASE_DR:
 			return ICE_MEDIA_FIBER;
 		case ICE_PHY_TYPE_LOW_100BASE_TX:
 		case ICE_PHY_TYPE_LOW_1000BASE_T:
@@ -209,6 +223,11 @@ static enum ice_media_type ice_get_media_type(struct ice_port_info *pi)
 		case ICE_PHY_TYPE_LOW_25GBASE_CR_S:
 		case ICE_PHY_TYPE_LOW_25GBASE_CR1:
 		case ICE_PHY_TYPE_LOW_40GBASE_CR4:
+		case ICE_PHY_TYPE_LOW_50GBASE_CR2:
+		case ICE_PHY_TYPE_LOW_50GBASE_CP:
+		case ICE_PHY_TYPE_LOW_100GBASE_CR4:
+		case ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4:
+		case ICE_PHY_TYPE_LOW_100GBASE_CP2:
 			return ICE_MEDIA_DA;
 		case ICE_PHY_TYPE_LOW_1000BASE_KX:
 		case ICE_PHY_TYPE_LOW_2500BASE_KX:
@@ -219,10 +238,18 @@ static enum ice_media_type ice_get_media_type(struct ice_port_info *pi)
 		case ICE_PHY_TYPE_LOW_25GBASE_KR1:
 		case ICE_PHY_TYPE_LOW_25GBASE_KR_S:
 		case ICE_PHY_TYPE_LOW_40GBASE_KR4:
+		case ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4:
+		case ICE_PHY_TYPE_LOW_50GBASE_KR2:
+		case ICE_PHY_TYPE_LOW_100GBASE_KR4:
+		case ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4:
+			return ICE_MEDIA_BACKPLANE;
+		}
+	} else {
+		switch (hw_link_info->phy_type_high) {
+		case ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4:
 			return ICE_MEDIA_BACKPLANE;
 		}
 	}
-
 	return ICE_MEDIA_UNKNOWN;
 }
 
@@ -274,6 +301,7 @@ ice_aq_get_link_info(struct ice_port_info *pi, bool ena_lse,
 	/* update current link status information */
 	hw_link_info->link_speed = le16_to_cpu(link_data.link_speed);
 	hw_link_info->phy_type_low = le64_to_cpu(link_data.phy_type_low);
+	hw_link_info->phy_type_high = le64_to_cpu(link_data.phy_type_high);
 	*hw_media_type = ice_get_media_type(pi);
 	hw_link_info->link_info = link_data.link_info;
 	hw_link_info->an_info = link_data.an_info;
@@ -1707,16 +1735,20 @@ void ice_clear_pxe_mode(struct ice_hw *hw)
 /**
  * ice_get_link_speed_based_on_phy_type - returns link speed
  * @phy_type_low: lower part of phy_type
+ * @phy_type_high: higher part of phy_type
  *
- * This helper function will convert a phy_type_low to its corresponding link
+ * This helper function will convert an entry in phy type structure
+ * [phy_type_low, phy_type_high] to its corresponding link speed.
+ * Note: In the structure of [phy_type_low, phy_type_high], there should
+ * be one bit set, as this function will convert one phy type to its
  * speed.
- * Note: In the structure of phy_type_low, there should be one bit set, as
- * this function will convert one phy type to its speed.
  * If no bit gets set, ICE_LINK_SPEED_UNKNOWN will be returned
  * If more than one bit gets set, ICE_LINK_SPEED_UNKNOWN will be returned
  */
-static u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low)
+static u16
+ice_get_link_speed_based_on_phy_type(u64 phy_type_low, u64 phy_type_high)
 {
+	u16 speed_phy_type_high = ICE_AQ_LINK_SPEED_UNKNOWN;
 	u16 speed_phy_type_low = ICE_AQ_LINK_SPEED_UNKNOWN;
 
 	switch (phy_type_low) {
@@ -1770,41 +1802,110 @@ static u16 ice_get_link_speed_based_on_phy_type(u64 phy_type_low)
 	case ICE_PHY_TYPE_LOW_40G_XLAUI:
 		speed_phy_type_low = ICE_AQ_LINK_SPEED_40GB;
 		break;
+	case ICE_PHY_TYPE_LOW_50GBASE_CR2:
+	case ICE_PHY_TYPE_LOW_50GBASE_SR2:
+	case ICE_PHY_TYPE_LOW_50GBASE_LR2:
+	case ICE_PHY_TYPE_LOW_50GBASE_KR2:
+	case ICE_PHY_TYPE_LOW_50G_LAUI2_AOC_ACC:
+	case ICE_PHY_TYPE_LOW_50G_LAUI2:
+	case ICE_PHY_TYPE_LOW_50G_AUI2_AOC_ACC:
+	case ICE_PHY_TYPE_LOW_50G_AUI2:
+	case ICE_PHY_TYPE_LOW_50GBASE_CP:
+	case ICE_PHY_TYPE_LOW_50GBASE_SR:
+	case ICE_PHY_TYPE_LOW_50GBASE_FR:
+	case ICE_PHY_TYPE_LOW_50GBASE_LR:
+	case ICE_PHY_TYPE_LOW_50GBASE_KR_PAM4:
+	case ICE_PHY_TYPE_LOW_50G_AUI1_AOC_ACC:
+	case ICE_PHY_TYPE_LOW_50G_AUI1:
+		speed_phy_type_low = ICE_AQ_LINK_SPEED_50GB;
+		break;
+	case ICE_PHY_TYPE_LOW_100GBASE_CR4:
+	case ICE_PHY_TYPE_LOW_100GBASE_SR4:
+	case ICE_PHY_TYPE_LOW_100GBASE_LR4:
+	case ICE_PHY_TYPE_LOW_100GBASE_KR4:
+	case ICE_PHY_TYPE_LOW_100G_CAUI4_AOC_ACC:
+	case ICE_PHY_TYPE_LOW_100G_CAUI4:
+	case ICE_PHY_TYPE_LOW_100G_AUI4_AOC_ACC:
+	case ICE_PHY_TYPE_LOW_100G_AUI4:
+	case ICE_PHY_TYPE_LOW_100GBASE_CR_PAM4:
+	case ICE_PHY_TYPE_LOW_100GBASE_KR_PAM4:
+	case ICE_PHY_TYPE_LOW_100GBASE_CP2:
+	case ICE_PHY_TYPE_LOW_100GBASE_SR2:
+	case ICE_PHY_TYPE_LOW_100GBASE_DR:
+		speed_phy_type_low = ICE_AQ_LINK_SPEED_100GB;
+		break;
 	default:
 		speed_phy_type_low = ICE_AQ_LINK_SPEED_UNKNOWN;
 		break;
 	}
 
-	return speed_phy_type_low;
+	switch (phy_type_high) {
+	case ICE_PHY_TYPE_HIGH_100GBASE_KR2_PAM4:
+	case ICE_PHY_TYPE_HIGH_100G_CAUI2_AOC_ACC:
+	case ICE_PHY_TYPE_HIGH_100G_CAUI2:
+	case ICE_PHY_TYPE_HIGH_100G_AUI2_AOC_ACC:
+	case ICE_PHY_TYPE_HIGH_100G_AUI2:
+		speed_phy_type_high = ICE_AQ_LINK_SPEED_100GB;
+		break;
+	default:
+		speed_phy_type_high = ICE_AQ_LINK_SPEED_UNKNOWN;
+		break;
+	}
+
+	if (speed_phy_type_low == ICE_AQ_LINK_SPEED_UNKNOWN &&
+	    speed_phy_type_high == ICE_AQ_LINK_SPEED_UNKNOWN)
+		return ICE_AQ_LINK_SPEED_UNKNOWN;
+	else if (speed_phy_type_low != ICE_AQ_LINK_SPEED_UNKNOWN &&
+		 speed_phy_type_high != ICE_AQ_LINK_SPEED_UNKNOWN)
+		return ICE_AQ_LINK_SPEED_UNKNOWN;
+	else if (speed_phy_type_low != ICE_AQ_LINK_SPEED_UNKNOWN &&
+		 speed_phy_type_high == ICE_AQ_LINK_SPEED_UNKNOWN)
+		return speed_phy_type_low;
+	else
+		return speed_phy_type_high;
 }
 
 /**
  * ice_update_phy_type
  * @phy_type_low: pointer to the lower part of phy_type
+ * @phy_type_high: pointer to the higher part of phy_type
  * @link_speeds_bitmap: targeted link speeds bitmap
  *
  * Note: For the link_speeds_bitmap structure, you can check it at
  * [ice_aqc_get_link_status->link_speed]. Caller can pass in
  * link_speeds_bitmap include multiple speeds.
  *
- * The value of phy_type_low will present a certain link speed. This helper
- * function will turn on bits in the phy_type_low based on the value of
+ * Each entry in this [phy_type_low, phy_type_high] structure will
+ * present a certain link speed. This helper function will turn on bits
+ * in [phy_type_low, phy_type_high] structure based on the value of
  * link_speeds_bitmap input parameter.
  */
-void ice_update_phy_type(u64 *phy_type_low, u16 link_speeds_bitmap)
+void
+ice_update_phy_type(u64 *phy_type_low, u64 *phy_type_high,
+		    u16 link_speeds_bitmap)
 {
 	u16 speed = ICE_AQ_LINK_SPEED_UNKNOWN;
+	u64 pt_high;
 	u64 pt_low;
 	int index;
 
 	/* We first check with low part of phy_type */
 	for (index = 0; index <= ICE_PHY_TYPE_LOW_MAX_INDEX; index++) {
 		pt_low = BIT_ULL(index);
-		speed = ice_get_link_speed_based_on_phy_type(pt_low);
+		speed = ice_get_link_speed_based_on_phy_type(pt_low, 0);
 
 		if (link_speeds_bitmap & speed)
 			*phy_type_low |= BIT_ULL(index);
 	}
+
+	/* We then check with high part of phy_type */
+	for (index = 0; index <= ICE_PHY_TYPE_HIGH_MAX_INDEX; index++) {
+		pt_high = BIT_ULL(index);
+		speed = ice_get_link_speed_based_on_phy_type(0, pt_high);
+
+		if (link_speeds_bitmap & speed)
+			*phy_type_high |= BIT_ULL(index);
+	}
 }
 
 /**
@@ -1936,6 +2037,7 @@ ice_set_fc(struct ice_port_info *pi, u8 *aq_failures, bool ena_auto_link_update)
 		if (ena_auto_link_update)
 			cfg.caps |= ICE_AQ_PHY_ENA_AUTO_LINK_UPDT;
 		/* Copy over all the old settings */
+		cfg.phy_type_high = pcaps->phy_type_high;
 		cfg.phy_type_low = pcaps->phy_type_low;
 		cfg.low_power_ctrl = pcaps->low_power_ctrl;
 		cfg.eee_cap = pcaps->eee_cap;

drivers/net/ethernet/intel/ice/ice_common.h

@@ -72,7 +72,8 @@ ice_aq_get_phy_caps(struct ice_port_info *pi, bool qual_mods, u8 report_mode,
 		    struct ice_aqc_get_phy_caps_data *caps,
 		    struct ice_sq_cd *cd);
 void
-ice_update_phy_type(u64 *phy_type_low, u16 link_speeds_bitmap);
+ice_update_phy_type(u64 *phy_type_low, u64 *phy_type_high,
+		    u16 link_speeds_bitmap);
 enum ice_status
 ice_aq_manage_mac_write(struct ice_hw *hw, u8 *mac_addr, u8 flags,
 			struct ice_sq_cd *cd);

drivers/net/ethernet/intel/ice/ice_lan_tx_rx.h

@@ -489,5 +489,7 @@ static inline struct ice_rx_ptype_decoded ice_decode_rx_desc_ptype(u16 ptype)
 #define ICE_LINK_SPEED_20000MBPS	20000
 #define ICE_LINK_SPEED_25000MBPS	25000
 #define ICE_LINK_SPEED_40000MBPS	40000
+#define ICE_LINK_SPEED_50000MBPS	50000
+#define ICE_LINK_SPEED_100000MBPS	100000
 
 #endif /* _ICE_LAN_TX_RX_H_ */

drivers/net/ethernet/intel/ice/ice_sriov.c

@@ -85,6 +85,12 @@ u32 ice_conv_link_speed_to_virtchnl(bool adv_link_support, u16 link_speed)
 		case ICE_AQ_LINK_SPEED_40GB:
 			speed = ICE_LINK_SPEED_40000MBPS;
 			break;
+		case ICE_AQ_LINK_SPEED_50GB:
+			speed = ICE_LINK_SPEED_50000MBPS;
+			break;
+		case ICE_AQ_LINK_SPEED_100GB:
+			speed = ICE_LINK_SPEED_100000MBPS;
+			break;
 		default:
 			speed = ICE_LINK_SPEED_UNKNOWN;
 			break;
@@ -116,6 +122,9 @@ u32 ice_conv_link_speed_to_virtchnl(bool adv_link_support, u16 link_speed)
 			break;
 		case ICE_AQ_LINK_SPEED_40GB:
 			/* fall through */
+		case ICE_AQ_LINK_SPEED_50GB:
+			/* fall through */
+		case ICE_AQ_LINK_SPEED_100GB:
 			speed = (u32)VIRTCHNL_LINK_SPEED_40GB;
 			break;
 		default:

drivers/net/ethernet/intel/ice/ice_type.h

@@ -90,6 +90,7 @@ enum ice_vsi_type {
 struct ice_link_status {
 	/* Refer to ice_aq_phy_type for bits definition */
 	u64 phy_type_low;
+	u64 phy_type_high;
 	u16 max_frame_size;
 	u16 link_speed;
 	u16 req_speeds;
@@ -118,6 +119,7 @@ struct ice_phy_info {
 	struct ice_link_status link_info;
 	struct ice_link_status link_info_old;
 	u64 phy_type_low;
+	u64 phy_type_high;
 	enum ice_media_type media_type;
 	u8 get_link_info;
 };