arm64: dts: qcom: sc7280: Fully describe fingerprint node on Herobrine

Update the fingerprint node on Herobrine to match the fingerprint DT
binding. This will allow us to drive the reset and boot gpios from the
driver when it is re-attached after flashing. We'll also be able to boot
the fingerprint processor if the BIOS isn't doing it for us.

Cc: Douglas Anderson <dianders@chromium.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221107191535.624371-2-swboyd@chromium.org

arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi

@@ -503,13 +503,16 @@ ap_spi_fp: &spi9 {
 	cs-gpios = <&tlmm 39 GPIO_ACTIVE_LOW>;
 
 	cros_ec_fp: ec@0 {
-		compatible = "google,cros-ec-spi";
+		compatible = "google,cros-ec-fp", "google,cros-ec-spi";
 		reg = <0>;
 		interrupt-parent = <&tlmm>;
 		interrupts = <61 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&fp_to_ap_irq_l>, <&fp_rst_l>, <&fpmcu_boot0>;
+		boot0-gpios = <&tlmm 68 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&tlmm 78 GPIO_ACTIVE_LOW>;
 		spi-max-frequency = <3000000>;
+		vdd-supply = <&pp3300_fp_mcu>;
 	};
 };