Commit af48f1d0 authored by Oder Chiou's avatar Oder Chiou Committed by Mark Brown

ASoC: rt5677: Support DSP function for VAD application

The ALC5677 has a programmable DSP, and there is a SPI that is dadicated for DSP
firmware loading. Therefore, the patch includes a SPI driver for writing the DSP
firmware. The VAD(Voice Activaty Detection) has be implemented and use the DSP to
recognize the key phase.
Signed-off-by: default avatarOder Chiou <oder_chiou@realtek.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 40eb90a1
......@@ -79,7 +79,7 @@ snd-soc-rt5640-objs := rt5640.o
snd-soc-rt5645-objs := rt5645.o
snd-soc-rt5651-objs := rt5651.o
snd-soc-rt5670-objs := rt5670.o
snd-soc-rt5677-objs := rt5677.o
snd-soc-rt5677-objs := rt5677.o rt5677-spi.o
snd-soc-sgtl5000-objs := sgtl5000.o
snd-soc-alc5623-objs := alc5623.o
snd-soc-alc5632-objs := alc5632.o
......
/*
* rt5677-spi.c -- RT5677 ALSA SoC audio codec driver
*
* Copyright 2013 Realtek Semiconductor Corp.
* Author: Oder Chiou <oder_chiou@realtek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/input.h>
#include <linux/spi/spi.h>
#include <linux/device.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include <linux/uaccess.h>
#include <linux/miscdevice.h>
#include <linux/regulator/consumer.h>
#include <linux/pm_qos.h>
#include <linux/sysfs.h>
#include <linux/clk.h>
#include <linux/firmware.h>
#include "rt5677-spi.h"
static struct spi_device *g_spi;
/**
* rt5677_spi_write - Write data to SPI.
* @txbuf: Data Buffer for writing.
* @len: Data length.
*
*
* Returns true for success.
*/
int rt5677_spi_write(u8 *txbuf, size_t len)
{
int status;
status = spi_write(g_spi, txbuf, len);
if (status)
dev_err(&g_spi->dev, "rt5677_spi_write error %d\n", status);
return status;
}
/**
* rt5677_spi_burst_write - Write data to SPI by rt5677 dsp memory address.
* @addr: Start address.
* @txbuf: Data Buffer for writng.
* @len: Data length, it must be a multiple of 8.
*
*
* Returns true for success.
*/
int rt5677_spi_burst_write(u32 addr, const struct firmware *fw)
{
u8 spi_cmd = RT5677_SPI_CMD_BURST_WRITE;
u8 *write_buf;
unsigned int i, end, offset = 0;
write_buf = kmalloc(RT5677_SPI_BUF_LEN + 6, GFP_KERNEL);
if (write_buf == NULL)
return -ENOMEM;
while (offset < fw->size) {
if (offset + RT5677_SPI_BUF_LEN <= fw->size)
end = RT5677_SPI_BUF_LEN;
else
end = fw->size % RT5677_SPI_BUF_LEN;
write_buf[0] = spi_cmd;
write_buf[1] = ((addr + offset) & 0xff000000) >> 24;
write_buf[2] = ((addr + offset) & 0x00ff0000) >> 16;
write_buf[3] = ((addr + offset) & 0x0000ff00) >> 8;
write_buf[4] = ((addr + offset) & 0x000000ff) >> 0;
for (i = 0; i < end; i += 8) {
write_buf[i + 12] = fw->data[offset + i + 0];
write_buf[i + 11] = fw->data[offset + i + 1];
write_buf[i + 10] = fw->data[offset + i + 2];
write_buf[i + 9] = fw->data[offset + i + 3];
write_buf[i + 8] = fw->data[offset + i + 4];
write_buf[i + 7] = fw->data[offset + i + 5];
write_buf[i + 6] = fw->data[offset + i + 6];
write_buf[i + 5] = fw->data[offset + i + 7];
}
write_buf[end + 5] = spi_cmd;
rt5677_spi_write(write_buf, end + 6);
offset += RT5677_SPI_BUF_LEN;
}
kfree(write_buf);
return 0;
}
static int rt5677_spi_probe(struct spi_device *spi)
{
g_spi = spi;
return 0;
}
static struct spi_driver rt5677_spi_driver = {
.driver = {
.name = "rt5677",
.owner = THIS_MODULE,
},
.probe = rt5677_spi_probe,
};
module_spi_driver(rt5677_spi_driver);
MODULE_DESCRIPTION("ASoC RT5677 SPI driver");
MODULE_AUTHOR("Oder Chiou <oder_chiou@realtek.com>");
MODULE_LICENSE("GPL v2");
/*
* rt5677-spi.h -- RT5677 ALSA SoC audio codec driver
*
* Copyright 2013 Realtek Semiconductor Corp.
* Author: Oder Chiou <oder_chiou@realtek.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __RT5671_SPI_H__
#define __RT5671_SPI_H__
#define RT5677_SPI_BUF_LEN 240
#define RT5677_SPI_CMD_BURST_WRITE 0x05
int rt5677_spi_write(u8 *txbuf, size_t len);
int rt5677_spi_burst_write(u32 addr, const struct firmware *fw);
#endif /* __RT5677_SPI_H__ */
......@@ -20,6 +20,7 @@
#include <linux/i2c.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/firmware.h>
#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
......@@ -31,6 +32,7 @@
#include "rl6231.h"
#include "rt5677.h"
#include "rt5677-spi.h"
#define RT5677_DEVICE_ID 0x6327
......@@ -537,6 +539,243 @@ static bool rt5677_readable_register(struct device *dev, unsigned int reg)
}
}
/**
* rt5677_dsp_mode_i2c_write_addr - Write value to address on DSP mode.
* @codec: SoC audio codec device.
* @addr: Address index.
* @value: Address data.
*
*
* Returns 0 for success or negative error code.
*/
static int rt5677_dsp_mode_i2c_write_addr(struct snd_soc_codec *codec,
unsigned int addr, unsigned int value, unsigned int opcode)
{
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
int ret;
mutex_lock(&rt5677->dsp_cmd_lock);
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_MSB, addr >> 16);
if (ret < 0) {
dev_err(codec->dev, "Failed to set addr msb value: %d\n", ret);
goto err;
}
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_LSB,
addr & 0xffff);
if (ret < 0) {
dev_err(codec->dev, "Failed to set addr lsb value: %d\n", ret);
goto err;
}
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_DATA_MSB,
value >> 16);
if (ret < 0) {
dev_err(codec->dev, "Failed to set data msb value: %d\n", ret);
goto err;
}
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_DATA_LSB,
value & 0xffff);
if (ret < 0) {
dev_err(codec->dev, "Failed to set data lsb value: %d\n", ret);
goto err;
}
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_OP_CODE, opcode);
if (ret < 0) {
dev_err(codec->dev, "Failed to set op code value: %d\n", ret);
goto err;
}
err:
mutex_unlock(&rt5677->dsp_cmd_lock);
return ret;
}
/**
* rt5677_dsp_mode_i2c_read_addr - Read value from address on DSP mode.
* @codec: SoC audio codec device.
* @addr: Address index.
* @value: Address data.
*
* Returns 0 for success or negative error code.
*/
static int rt5677_dsp_mode_i2c_read_addr(
struct snd_soc_codec *codec, unsigned int addr, unsigned int *value)
{
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
int ret;
unsigned int msb, lsb;
mutex_lock(&rt5677->dsp_cmd_lock);
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_MSB, addr >> 16);
if (ret < 0) {
dev_err(codec->dev, "Failed to set addr msb value: %d\n", ret);
goto err;
}
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_ADDR_LSB,
addr & 0xffff);
if (ret < 0) {
dev_err(codec->dev, "Failed to set addr lsb value: %d\n", ret);
goto err;
}
ret = regmap_write(rt5677->regmap, RT5677_DSP_I2C_OP_CODE , 0x0002);
if (ret < 0) {
dev_err(codec->dev, "Failed to set op code value: %d\n", ret);
goto err;
}
regmap_read(rt5677->regmap, RT5677_DSP_I2C_DATA_MSB, &msb);
regmap_read(rt5677->regmap, RT5677_DSP_I2C_DATA_LSB, &lsb);
*value = (msb << 16) | lsb;
err:
mutex_unlock(&rt5677->dsp_cmd_lock);
return ret;
}
/**
* rt5677_dsp_mode_i2c_write - Write register on DSP mode.
* @codec: SoC audio codec device.
* @reg: Register index.
* @value: Register data.
*
*
* Returns 0 for success or negative error code.
*/
static int rt5677_dsp_mode_i2c_write(struct snd_soc_codec *codec,
unsigned int reg, unsigned int value)
{
return rt5677_dsp_mode_i2c_write_addr(codec, 0x18020000 + reg * 2,
value, 0x0001);
}
/**
* rt5677_dsp_mode_i2c_read - Read register on DSP mode.
* @codec: SoC audio codec device.
* @reg: Register index.
*
*
* Returns Register value.
*/
static unsigned int rt5677_dsp_mode_i2c_read(
struct snd_soc_codec *codec, unsigned int reg)
{
unsigned int value = 0;
rt5677_dsp_mode_i2c_read_addr(codec, 0x18020000 + reg * 2, &value);
return value;
}
/**
* rt5677_dsp_mode_i2c_update_bits - update register on DSP mode.
* @codec: audio codec
* @reg: register index.
* @mask: register mask
* @value: new value
*
*
* Returns 1 for change, 0 for no change, or negative error code.
*/
static int rt5677_dsp_mode_i2c_update_bits(struct snd_soc_codec *codec,
unsigned int reg, unsigned int mask, unsigned int value)
{
unsigned int old, new;
int change, ret;
ret = rt5677_dsp_mode_i2c_read(codec, reg);
if (ret < 0) {
dev_err(codec->dev, "Failed to read reg: %d\n", ret);
goto err;
}
old = ret;
new = (old & ~mask) | (value & mask);
change = old != new;
if (change) {
ret = rt5677_dsp_mode_i2c_write(codec, reg, new);
if (ret < 0) {
dev_err(codec->dev,
"Failed to write reg: %d\n", ret);
goto err;
}
}
return change;
err:
return ret;
}
static int rt5677_set_dsp_vad(struct snd_soc_codec *codec, bool on)
{
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
static bool activity;
int ret;
if (on && !activity) {
activity = true;
regcache_cache_only(rt5677->regmap, false);
regcache_cache_bypass(rt5677->regmap, true);
regmap_update_bits(rt5677->regmap, RT5677_DIG_MISC, 0x1, 0x1);
regmap_update_bits(rt5677->regmap,
RT5677_PR_BASE + RT5677_BIAS_CUR4, 0x0f00, 0x0f00);
regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG1,
RT5677_LDO1_SEL_MASK, 0x0);
regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG2,
RT5677_PWR_LDO1, RT5677_PWR_LDO1);
regmap_write(rt5677->regmap, RT5677_GLB_CLK2, 0x0080);
regmap_write(rt5677->regmap, RT5677_PWR_DSP2, 0x07ff);
regmap_write(rt5677->regmap, RT5677_PWR_DSP1, 0x07ff);
ret = request_firmware(&rt5677->fw1, RT5677_FIRMWARE1,
codec->dev);
if (ret == 0) {
rt5677_spi_burst_write(0x50000000, rt5677->fw1);
release_firmware(rt5677->fw1);
}
ret = request_firmware(&rt5677->fw2, RT5677_FIRMWARE2,
codec->dev);
if (ret == 0) {
rt5677_spi_burst_write(0x60000000, rt5677->fw2);
release_firmware(rt5677->fw2);
}
rt5677_dsp_mode_i2c_update_bits(codec, RT5677_PWR_DSP1, 0x1,
0x0);
regcache_cache_bypass(rt5677->regmap, false);
regcache_cache_only(rt5677->regmap, true);
} else if (!on && activity) {
activity = false;
regcache_cache_only(rt5677->regmap, false);
regcache_cache_bypass(rt5677->regmap, true);
rt5677_dsp_mode_i2c_update_bits(codec, RT5677_PWR_DSP1, 0x1,
0x1);
rt5677_dsp_mode_i2c_write(codec, RT5677_PWR_DSP1, 0x0001);
regmap_write(rt5677->regmap, RT5677_RESET, 0x10ec);
regcache_cache_bypass(rt5677->regmap, false);
regcache_mark_dirty(rt5677->regmap);
regcache_sync(rt5677->regmap);
}
return 0;
}
static const DECLARE_TLV_DB_SCALE(out_vol_tlv, -4650, 150, 0);
static const DECLARE_TLV_DB_SCALE(dac_vol_tlv, -65625, 375, 0);
static const DECLARE_TLV_DB_SCALE(in_vol_tlv, -3450, 150, 0);
......@@ -556,6 +795,31 @@ static unsigned int bst_tlv[] = {
8, 8, TLV_DB_SCALE_ITEM(5200, 0, 0),
};
static int rt5677_dsp_vad_get(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
ucontrol->value.integer.value[0] = rt5677->dsp_vad_en;
return 0;
}
static int rt5677_dsp_vad_put(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
rt5677->dsp_vad_en = !!ucontrol->value.integer.value[0];
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF)
rt5677_set_dsp_vad(codec, rt5677->dsp_vad_en);
return 0;
}
static const struct snd_kcontrol_new rt5677_snd_controls[] = {
/* OUTPUT Control */
SOC_SINGLE("OUT1 Playback Switch", RT5677_LOUT1,
......@@ -627,6 +891,9 @@ static const struct snd_kcontrol_new rt5677_snd_controls[] = {
SOC_DOUBLE_TLV("Mono ADC Boost Volume", RT5677_ADC_BST_CTRL2,
RT5677_MONO_ADC_L_BST_SFT, RT5677_MONO_ADC_R_BST_SFT, 3, 0,
adc_bst_tlv),
SOC_SINGLE_EXT("DSP VAD Switch", SND_SOC_NOPM, 0, 1, 0,
rt5677_dsp_vad_get, rt5677_dsp_vad_put),
};
/**
......@@ -3181,6 +3448,8 @@ static int rt5677_set_bias_level(struct snd_soc_codec *codec,
case SND_SOC_BIAS_PREPARE:
if (codec->dapm.bias_level == SND_SOC_BIAS_STANDBY) {
rt5677_set_dsp_vad(codec, false);
regmap_update_bits(rt5677->regmap, RT5677_PWR_ANLG1,
RT5677_LDO1_SEL_MASK | RT5677_LDO2_SEL_MASK,
0x0055);
......@@ -3214,6 +3483,9 @@ static int rt5677_set_bias_level(struct snd_soc_codec *codec,
regmap_write(rt5677->regmap, RT5677_PWR_ANLG2, 0x0000);
regmap_update_bits(rt5677->regmap,
RT5677_PR_BASE + RT5677_BIAS_CUR4, 0x0f00, 0x0000);
if (rt5677->dsp_vad_en)
rt5677_set_dsp_vad(codec, true);
break;
default:
......@@ -3407,6 +3679,8 @@ static int rt5677_probe(struct snd_soc_codec *codec)
for (i = 0; i < RT5677_GPIO_NUM; i++)
rt5677_gpio_config(rt5677, i, rt5677->pdata.gpio_config[i]);
mutex_init(&rt5677->dsp_cmd_lock);
return 0;
}
......@@ -3426,8 +3700,11 @@ static int rt5677_suspend(struct snd_soc_codec *codec)
{
struct rt5677_priv *rt5677 = snd_soc_codec_get_drvdata(codec);
regcache_cache_only(rt5677->regmap, true);
regcache_mark_dirty(rt5677->regmap);
if (!rt5677->dsp_vad_en) {
regcache_cache_only(rt5677->regmap, true);
regcache_mark_dirty(rt5677->regmap);
}
if (gpio_is_valid(rt5677->pow_ldo2))
gpio_set_value_cansleep(rt5677->pow_ldo2, 0);
......@@ -3442,8 +3719,11 @@ static int rt5677_resume(struct snd_soc_codec *codec)
gpio_set_value_cansleep(rt5677->pow_ldo2, 1);
msleep(10);
}
regcache_cache_only(rt5677->regmap, false);
regcache_sync(rt5677->regmap);
if (!rt5677->dsp_vad_en) {
regcache_cache_only(rt5677->regmap, false);
regcache_sync(rt5677->regmap);
}
return 0;
}
......
......@@ -1507,6 +1507,9 @@
#define RT5677_GPIO5_FUNC_GPIO (0x0 << 9)
#define RT5677_GPIO5_FUNC_DMIC (0x1 << 9)
#define RT5677_FIRMWARE1 "rt5677_dsp_fw1.bin"
#define RT5677_FIRMWARE2 "rt5677_dsp_fw2.bin"
/* System Clock Source */
enum {
RT5677_SCLK_S_MCLK,
......@@ -1546,6 +1549,8 @@ struct rt5677_priv {
struct snd_soc_codec *codec;
struct rt5677_platform_data pdata;
struct regmap *regmap;
const struct firmware *fw1, *fw2;
struct mutex dsp_cmd_lock;
int sysclk;
int sysclk_src;
......@@ -1559,6 +1564,7 @@ struct rt5677_priv {
#ifdef CONFIG_GPIOLIB
struct gpio_chip gpio_chip;
#endif
bool dsp_vad_en;
};
#endif /* __RT5677_H__ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment