ARM: kirkwood: use gpio-fan DT binding on lsxl

Remove board specific gpio-fan driver registration. Moved into device tree.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

arch/arm/boot/dts/kirkwood-lsxl.dtsi

@@ -94,4 +94,15 @@ led@5 {
 			gpios = <&gpio1 16 1>;
 		};
 	};
+
+	gpio_fan {
+		compatible = "gpio-fan";
+		gpios = <&gpio0 19 1
+		         &gpio0 18 1>;
+		gpio-fan,speed-map = <0    3
+		                      1500 2
+		                      3250 1
+		                      5000 0>;
+		alarm-gpios = <&gpio1 8 0>;
+	};
 };

arch/arm/mach-kirkwood/board-lsxl.c

@@ -20,11 +20,6 @@
 #include <linux/spi/spi.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/gpio.h>
-#include <linux/gpio-fan.h>
-#include <linux/input.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
 
@@ -53,51 +48,6 @@ static unsigned int lsxl_mpp_config[] __initdata = {
 	0
 };
 
-#define LSXL_GPIO_FAN_HIGH	18
-#define LSXL_GPIO_FAN_LOW	19
-#define LSXL_GPIO_FAN_LOCK	40
-
-static struct gpio_fan_alarm lsxl_alarm = {
-	.gpio = LSXL_GPIO_FAN_LOCK,
-};
-
-static struct gpio_fan_speed lsxl_speeds[] = {
-	{
-		.rpm = 0,
-		.ctrl_val = 3,
-	}, {
-		.rpm = 1500,
-		.ctrl_val = 1,
-	}, {
-		.rpm = 3250,
-		.ctrl_val = 2,
-	}, {
-		.rpm = 5000,
-		.ctrl_val = 0,
-	}
-};
-
-static int lsxl_gpio_list[] = {
-	LSXL_GPIO_FAN_HIGH, LSXL_GPIO_FAN_LOW,
-};
-
-static struct gpio_fan_platform_data lsxl_fan_data = {
-	.num_ctrl = ARRAY_SIZE(lsxl_gpio_list),
-	.ctrl = lsxl_gpio_list,
-	.alarm = &lsxl_alarm,
-	.num_speed = ARRAY_SIZE(lsxl_speeds),
-	.speed = lsxl_speeds,
-};
-
-static struct platform_device lsxl_fan_device = {
-	.name = "gpio-fan",
-	.id = -1,
-	.num_resources = 0,
-	.dev = {
-		.platform_data = &lsxl_fan_data,
-	},
-};
-
 /*
  * On the LS-XHL/LS-CHLv2, the shutdown process is following:
  * - Userland monitors key events until the power switch goes to off position
@@ -128,7 +78,6 @@ void __init lsxl_init(void)
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&lsxl_ge00_data);
 	kirkwood_ge01_init(&lsxl_ge01_data);
-	platform_device_register(&lsxl_fan_device);
 
 	/* register power-off method */
 	pm_power_off = lsxl_power_off;