ARC: [plat-hsdk]: Add support of Vivante GPU

HSDK board has built-in Vivante GPU IP which works perfectly fine
with Etnaviv driver, so let's use it.
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>

arch/arc/boot/dts/hsdk.dts

@@ -167,6 +167,24 @@ mmcclk_biu: mmcclk-biu {
 			#clock-cells = <0>;
 		};
 
+		gpu_core_clk: gpu-core-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_dma_clk: gpu-dma-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <400000000>;
+			#clock-cells = <0>;
+		};
+
+		gpu_cfg_clk: gpu-cfg-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <200000000>;
+			#clock-cells = <0>;
+		};
+
 		dmac_core_clk: dmac-core-clk {
 			compatible = "fixed-clock";
 			clock-frequency = <400000000>;
@@ -264,6 +282,17 @@ gpio_port_a: gpio-controller@0 {
 			};
 		};
 
+		gpu_3d: gpu@90000 {
+			compatible = "vivante,gc";
+			reg = <0x90000 0x4000>;
+			clocks = <&gpu_dma_clk>,
+				 <&gpu_cfg_clk>,
+				 <&gpu_core_clk>,
+				 <&gpu_core_clk>;
+			clock-names = "bus", "reg", "core", "shader";
+			interrupts = <28>;
+		};
+
 		dmac: dmac@80000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0x80000 0x400>;

arch/arc/configs/hsdk_defconfig

@@ -54,6 +54,7 @@ CONFIG_GPIO_SNPS_CREG=y
 CONFIG_DRM=y
 # CONFIG_DRM_FBDEV_EMULATION is not set
 CONFIG_DRM_UDL=y
+CONFIG_DRM_ETNAVIV=y
 CONFIG_FB=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB_EHCI_HCD=y
@@ -65,7 +66,6 @@ CONFIG_MMC=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_DW=y
-# CONFIG_IOMMU_SUPPORT is not set
 CONFIG_EXT3_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y