[PATCH] sundance: include MII address 0 in PHY probe

Include MII address 0 at the end of the PHY scan.  This covers the
entire range of possible MII addresses.
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Jeff Garzik <jgarzik@pobox.com>

drivers/net/sundance.c

@@ -609,16 +609,17 @@ static int __devinit sundance_probe1 (struct pci_dev *pdev,
 
 	np->phys[0] = 1;		/* Default setting */
 	np->mii_preamble_required++;
-	for (phy = 1; phy < 32 && phy_idx < MII_CNT; phy++) {
+	for (phy = 1; phy <= 32 && phy_idx < MII_CNT; phy++) {
 		int mii_status = mdio_read(dev, phy, MII_BMSR);
+		int phyx = phy & 0x1f;
 		if (mii_status != 0xffff  &&  mii_status != 0x0000) {
-			np->phys[phy_idx++] = phy;
-			np->mii_if.advertising = mdio_read(dev, phy, MII_ADVERTISE);
+			np->phys[phy_idx++] = phyx;
+			np->mii_if.advertising = mdio_read(dev, phyx, MII_ADVERTISE);
 			if ((mii_status & 0x0040) == 0)
 				np->mii_preamble_required++;
 			printk(KERN_INFO "%s: MII PHY found at address %d, status "
 				   "0x%4.4x advertising %4.4x.\n",
-				   dev->name, phy, mii_status, np->mii_if.advertising);
+				   dev->name, phyx, mii_status, np->mii_if.advertising);
 		}
 	}
 	np->mii_preamble_required--;