Commit b10ab7b8 authored by Tushar Behera's avatar Tushar Behera Committed by Mark Brown

ASoC: max98090: Add master clock handling

If master clock is provided through device tree, then update
the master clock frequency during set_sysclk.

Documentation has been updated to reflect the change.
Signed-off-by: default avatarTushar Behera <tushar.behera@linaro.org>
Signed-off-by: default avatarMark Brown <broonie@linaro.org>
parent 2c81a10a
......@@ -10,6 +10,12 @@ Required properties:
- interrupts : The CODEC's interrupt output.
Optional properties:
- clocks: The phandle of the master clock to the CODEC
- clock-names: Should be "mclk"
Pins on the device (for linking into audio routes):
* MIC1
......
......@@ -16,6 +16,7 @@
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/acpi.h>
#include <linux/clk.h>
#include <sound/jack.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
......@@ -1798,6 +1799,19 @@ static int max98090_set_bias_level(struct snd_soc_codec *codec,
break;
case SND_SOC_BIAS_PREPARE:
/*
* SND_SOC_BIAS_PREPARE is called while preparing for a
* transition to ON or away from ON. If current bias_level
* is SND_SOC_BIAS_ON, then it is preparing for a transition
* away from ON. Disable the clock in that case, otherwise
* enable it.
*/
if (!IS_ERR(max98090->mclk)) {
if (codec->dapm.bias_level == SND_SOC_BIAS_ON)
clk_disable_unprepare(max98090->mclk);
else
clk_prepare_enable(max98090->mclk);
}
break;
case SND_SOC_BIAS_STANDBY:
......@@ -1927,6 +1941,11 @@ static int max98090_dai_set_sysclk(struct snd_soc_dai *dai,
if (freq == max98090->sysclk)
return 0;
if (!IS_ERR(max98090->mclk)) {
freq = clk_round_rate(max98090->mclk, freq);
clk_set_rate(max98090->mclk, freq);
}
/* Setup clocks for slave mode, and using the PLL
* PSCLK = 0x01 (when master clk is 10MHz to 20MHz)
* 0x02 (when master clk is 20MHz to 40MHz)..
......@@ -2211,6 +2230,10 @@ static int max98090_probe(struct snd_soc_codec *codec)
dev_dbg(codec->dev, "max98090_probe\n");
max98090->mclk = devm_clk_get(codec->dev, "mclk");
if (PTR_ERR(max98090->mclk) == -EPROBE_DEFER)
return -EPROBE_DEFER;
max98090->codec = codec;
/* Reset the codec, the DSP core, and disable all interrupts */
......
......@@ -1524,6 +1524,7 @@ struct max98090_priv {
struct snd_soc_codec *codec;
enum max98090_type devtype;
struct max98090_pdata *pdata;
struct clk *mclk;
unsigned int sysclk;
unsigned int bclk;
unsigned int lrclk;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment