staging: wilc1000: remove unused code prior to throughput enhancement in SPI

The firmware now uses throughput enhancement code by default for SPI so
remove the previous implementation as its not used anymore. Removed the
use of 'has_thrpt_enh' element as its always true.
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Link: https://lore.kernel.org/r/20200117160157.8706-5-ajay.kathat@microchip.comSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/wilc1000/spi.c

@@ -13,7 +13,6 @@
 struct wilc_spi {
 	int crc_off;
 	int nint;
-	int has_thrpt_enh;
 };
 
 static const struct wilc_hif_func wilc_hif_spi;
@@ -897,8 +896,6 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
 		return 0;
 	}
 
-	spi_priv->has_thrpt_enh = 1;
-
 	isinit = 1;
 
 	return 1;
@@ -906,154 +903,22 @@ static int wilc_spi_init(struct wilc *wilc, bool resume)
 
 static int wilc_spi_read_size(struct wilc *wilc, u32 *size)
 {
-	struct spi_device *spi = to_spi_device(wilc->dev);
-	struct wilc_spi *spi_priv = wilc->bus_data;
 	int ret;
 
-	if (spi_priv->has_thrpt_enh) {
-		ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE,
-					size);
-		*size = *size  & IRQ_DMA_WD_CNT_MASK;
-	} else {
-		u32 tmp;
-		u32 byte_cnt;
-
-		ret = wilc_spi_read_reg(wilc, WILC_VMM_TO_HOST_SIZE,
-					&byte_cnt);
-		if (!ret) {
-			dev_err(&spi->dev,
-				"Failed read WILC_VMM_TO_HOST_SIZE ...\n");
-			return ret;
-		}
-		tmp = (byte_cnt >> 2) & IRQ_DMA_WD_CNT_MASK;
-		*size = tmp;
-	}
+	ret = spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE, size);
+	*size = *size & IRQ_DMA_WD_CNT_MASK;
 
 	return ret;
 }
 
 static int wilc_spi_read_int(struct wilc *wilc, u32 *int_status)
 {
-	struct spi_device *spi = to_spi_device(wilc->dev);
-	struct wilc_spi *spi_priv = wilc->bus_data;
-	int ret;
-	u32 tmp;
-	u32 byte_cnt;
-	bool unexpected_irq;
-	int j;
-	u32 unknown_mask;
-	u32 irq_flags;
-	int k = IRG_FLAGS_OFFSET + 5;
-
-	if (spi_priv->has_thrpt_enh)
-		return spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE,
-					 int_status);
-	ret = wilc_spi_read_reg(wilc, WILC_VMM_TO_HOST_SIZE, &byte_cnt);
-	if (!ret) {
-		dev_err(&spi->dev,
-			"Failed read WILC_VMM_TO_HOST_SIZE ...\n");
-		return ret;
-	}
-	tmp = (byte_cnt >> 2) & IRQ_DMA_WD_CNT_MASK;
-
-	j = 0;
-	do {
-		wilc_spi_read_reg(wilc, 0x1a90, &irq_flags);
-		tmp |= ((irq_flags >> 27) << IRG_FLAGS_OFFSET);
-
-		if (spi_priv->nint > 5) {
-			wilc_spi_read_reg(wilc, 0x1a94, &irq_flags);
-			tmp |= (((irq_flags >> 0) & 0x7) << k);
-		}
-
-		unknown_mask = ~((1ul << spi_priv->nint) - 1);
-
-		unexpected_irq = (tmp >> IRG_FLAGS_OFFSET) & unknown_mask;
-		if (unexpected_irq) {
-			dev_err(&spi->dev,
-				"Unexpected interrupt(2):j=%d,tmp=%x,mask=%x\n",
-				j, tmp, unknown_mask);
-		}
-
-		j++;
-	} while (unexpected_irq);
-
-	*int_status = tmp;
-
-	return ret;
+	return spi_internal_read(wilc, 0xe840 - WILC_SPI_REG_BASE, int_status);
 }
 
 static int wilc_spi_clear_int_ext(struct wilc *wilc, u32 val)
 {
-	struct spi_device *spi = to_spi_device(wilc->dev);
-	struct wilc_spi *spi_priv = wilc->bus_data;
-	int ret;
-	u32 flags;
-	u32 tbl_ctl;
-
-	if (spi_priv->has_thrpt_enh) {
-		return spi_internal_write(wilc, 0xe844 - WILC_SPI_REG_BASE,
-					  val);
-	}
-
-	flags = val & (BIT(MAX_NUM_INT) - 1);
-	if (flags) {
-		int i;
-
-		ret = 1;
-		for (i = 0; i < spi_priv->nint; i++) {
-			/*
-			 * No matter what you write 1 or 0,
-			 * it will clear interrupt.
-			 */
-			if (flags & 1)
-				ret = wilc_spi_write_reg(wilc,
-							 0x10c8 + i * 4, 1);
-			if (!ret)
-				break;
-			flags >>= 1;
-		}
-		if (!ret) {
-			dev_err(&spi->dev,
-				"Failed wilc_spi_write_reg, set reg %x ...\n",
-				0x10c8 + i * 4);
-			return ret;
-		}
-		for (i = spi_priv->nint; i < MAX_NUM_INT; i++) {
-			if (flags & 1)
-				dev_err(&spi->dev,
-					"Unexpected interrupt cleared %d...\n",
-					i);
-			flags >>= 1;
-		}
-	}
-
-	tbl_ctl = 0;
-	/* select VMM table 0 */
-	if (val & SEL_VMM_TBL0)
-		tbl_ctl |= BIT(0);
-	/* select VMM table 1 */
-	if (val & SEL_VMM_TBL1)
-		tbl_ctl |= BIT(1);
-
-	ret = wilc_spi_write_reg(wilc, WILC_VMM_TBL_CTL, tbl_ctl);
-	if (!ret) {
-		dev_err(&spi->dev, "fail write reg vmm_tbl_ctl...\n");
-		return ret;
-	}
-
-	if (val & EN_VMM) {
-		/*
-		 * enable vmm transfer.
-		 */
-		ret = wilc_spi_write_reg(wilc, WILC_VMM_CORE_CTL, 1);
-		if (!ret) {
-			dev_err(&spi->dev, "fail write reg vmm_core_ctl...\n");
-			return ret;
-		}
-	}
-
-	return ret;
+	return spi_internal_write(wilc, 0xe844 - WILC_SPI_REG_BASE, val);
 }
 
 static int wilc_spi_sync_ext(struct wilc *wilc, int nint)