Commit b1742ffa authored by Roger Shimizu's avatar Roger Shimizu Committed by Gregory CLEMENT

ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl

Add dts file to support Buffalo Linkstation LS-GL
(a.k.a Buffalo Linkstation Pro/Live), which is marvell orion5x based
3.5" HDD NAS.

Product info:
  - (JPN) http://buffalo.jp/products/catalog/item/l/ls-gl/
  - (ENG) http://www.buffalotech.com/products/network-storage/linkstation/linkstation-pro

This device tree is based on the board file:
  arch/arm/mach-orion5x/kurobox_pro-setup.c
However, that board file also support Kurobox Pro, which is not supported by
device tree yet. So the board file is not removed.
Signed-off-by: default avatarRoger Shimizu <rogershimizu@gmail.com>
Reviewed-by: default avatarAndrew Lunn <andrew@lunn.ch>
Signed-off-by: default avatarGregory CLEMENT <gregory.clement@free-electrons.com>
parent 305e0b2a
......@@ -517,6 +517,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
dtb-$(CONFIG_ARCH_ORION5X) += \
orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
orion5x-linkstation-lsgl.dtb \
orion5x-linkstation-lswtgl.dtb \
orion5x-lswsgl.dtb \
orion5x-maxtor-shared-storage-2.dtb \
......
/*
* Device Tree file for Buffalo Linkstation LS-GL
* (also known as Buffalo Linkstation Pro/Live)
*
* Copyright (C) 2016
* Roger Shimizu <rogershimizu@gmail.com>
*
* Based on the board file arch/arm/mach-orion5x/kurobox_pro-setup.c
* Copyright (C) Ronen Shitrit <rshitrit@marvell.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "orion5x-linkstation.dtsi"
#include <dt-bindings/gpio/gpio.h>
/ {
model = "Buffalo Linkstation Pro/Live";
compatible = "buffalo,lsgl", "marvell,orion5x-88f5182", "marvell,orion5x";
memory { /* 128 MB */
device_type = "memory";
reg = <0x00000000 0x8000000>;
};
};
&pinctrl {
pmx_power_hdd: pmx-power-hdd {
marvell,pins = "mpp1";
marvell,function = "gpio";
};
pmx_power_usb: pmx-power-usb {
marvell,pins = "mpp9";
marvell,function = "gpio";
};
};
&hdd_power {
gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
};
&usb_power {
gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
&ehci1 {
status = "okay";
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment