Merge tag 'extcon-next-for-5.13' of...

Merge tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon into char-misc-next

Chanwoo writes:

Update extcon next for v5.13

Detailed description for this pull request:

1. Update extcon provider driver
- Add the support of charging interrupt to detect charger connector
for extcon-max8997.c

- Detect OTG when USB_ID pin is connected to ground for extcon-sm5502.c

- Add the support for VBUS detection for extcon-qcom-spmi-misc.c
and replace qcom,pm8941-misc binding document with yaml style.

* tag 'extcon-next-for-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/extcon:
  extcon: qcom-spmi: Add support for VBUS detection
  bindings: pm8941-misc: Add support for VBUS detection
  bindings: pm8941-misc: Convert bindings to YAML
  extcon: sm5502: Detect OTG when USB_ID is connected to ground
  extcon: max8997: Add CHGINS and CHGRM interrupt handling

Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.txt

-Qualcomm's PM8941 USB ID Extcon device
-
-Some Qualcomm PMICs have a "misc" module that can be used to detect when
-the USB ID pin has been pulled low or high.
-
-PROPERTIES
-
-- compatible:
-    Usage: required
-    Value type: <string>
-    Definition: Should contain "qcom,pm8941-misc";
-
-- reg:
-    Usage: required
-    Value type: <u32>
-    Definition: Should contain the offset to the misc address space
-
-- interrupts:
-    Usage: required
-    Value type: <prop-encoded-array>
-    Definition: Should contain the usb id interrupt
-
-- interrupt-names:
-    Usage: required
-    Value type: <stringlist>
-    Definition: Should contain the string "usb_id" for the usb id interrupt
-
-Example:
-
-	pmic {
-		usb_id: misc@900 {
-			compatible = "qcom,pm8941-misc";
-			reg = <0x900>;
-			interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "usb_id";
-		};
-	}
-
-	usb-controller {
-		extcon = <&usb_id>;
-	};

Documentation/devicetree/bindings/extcon/qcom,pm8941-misc.yaml

+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/extcon/qcom,pm8941-misc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. PM8941 USB ID Extcon device
+
+maintainers:
+  - Guru Das Srinagesh <gurus@codeaurora.org>
+
+description: |
+  Some Qualcomm PMICs have a "misc" module that can be used to detect when
+  the USB ID pin has been pulled low or high.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,pm8941-misc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  interrupt-names:
+    minItems: 1
+    items:
+      - const: usb_id
+      - const: usb_vbus
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    pmic {
+            #address-cells = <1>;
+            #size-cells = <0>;
+            interrupt-controller;
+            #interrupt-cells = <4>;
+
+            usb_id: misc@900 {
+                    compatible = "qcom,pm8941-misc";
+                    reg = <0x900>;
+                    interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
+                    interrupt-names = "usb_id";
+            };
+    };
+
+    usb-controller {
+           extcon = <&usb_id>;
+    };

drivers/extcon/extcon-max8997.c

@@ -44,6 +44,8 @@ static struct max8997_muic_irq muic_irqs[] = {
 	{ MAX8997_MUICIRQ_ChgDetRun,	"muic-CHGDETRUN" },
 	{ MAX8997_MUICIRQ_ChgTyp,	"muic-CHGTYP" },
 	{ MAX8997_MUICIRQ_OVP,		"muic-OVP" },
+	{ MAX8997_PMICIRQ_CHGINS,	"pmic-CHGINS" },
+	{ MAX8997_PMICIRQ_CHGRM,	"pmic-CHGRM" },
 };
 
 /* Define supported cable type */
@@ -538,6 +540,8 @@ static void max8997_muic_irq_work(struct work_struct *work)
 	case MAX8997_MUICIRQ_DCDTmr:
 	case MAX8997_MUICIRQ_ChgDetRun:
 	case MAX8997_MUICIRQ_ChgTyp:
+	case MAX8997_PMICIRQ_CHGINS:
+	case MAX8997_PMICIRQ_CHGRM:
 		/* Handle charger cable */
 		ret = max8997_muic_chg_handler(info);
 		break;

drivers/extcon/extcon-qcom-spmi-misc.c

 // SPDX-License-Identifier: GPL-2.0-only
 /**
  * extcon-qcom-spmi-misc.c - Qualcomm USB extcon driver to support USB ID
- *				detection based on extcon-usb-gpio.c.
+ *			and VBUS detection based on extcon-usb-gpio.c.
  *
  * Copyright (C) 2016 Linaro, Ltd.
  * Stephen Boyd <stephen.boyd@linaro.org>
@@ -21,30 +21,56 @@
 
 struct qcom_usb_extcon_info {
 	struct extcon_dev *edev;
-	int irq;
+	int id_irq;
+	int vbus_irq;
 	struct delayed_work wq_detcable;
 	unsigned long debounce_jiffies;
 };
 
 static const unsigned int qcom_usb_extcon_cable[] = {
+	EXTCON_USB,
 	EXTCON_USB_HOST,
 	EXTCON_NONE,
 };
 
 static void qcom_usb_extcon_detect_cable(struct work_struct *work)
 {
-	bool id;
+	bool state = false;
 	int ret;
+	union extcon_property_value val;
 	struct qcom_usb_extcon_info *info = container_of(to_delayed_work(work),
 						    struct qcom_usb_extcon_info,
 						    wq_detcable);
 
-	/* check ID and update cable state */
-	ret = irq_get_irqchip_state(info->irq, IRQCHIP_STATE_LINE_LEVEL, &id);
-	if (ret)
-		return;
+	if (info->id_irq > 0) {
+		/* check ID and update cable state */
+		ret = irq_get_irqchip_state(info->id_irq,
+				IRQCHIP_STATE_LINE_LEVEL, &state);
+		if (ret)
+			return;
+
+		if (!state) {
+			val.intval = true;
+			extcon_set_property(info->edev, EXTCON_USB_HOST,
+						EXTCON_PROP_USB_SS, val);
+		}
+		extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !state);
+	}
 
-	extcon_set_state_sync(info->edev, EXTCON_USB_HOST, !id);
+	if (info->vbus_irq > 0) {
+		/* check VBUS and update cable state */
+		ret = irq_get_irqchip_state(info->vbus_irq,
+				IRQCHIP_STATE_LINE_LEVEL, &state);
+		if (ret)
+			return;
+
+		if (state) {
+			val.intval = true;
+			extcon_set_property(info->edev, EXTCON_USB,
+						EXTCON_PROP_USB_SS, val);
+		}
+		extcon_set_state_sync(info->edev, EXTCON_USB, state);
+	}
 }
 
 static irqreturn_t qcom_usb_irq_handler(int irq, void *dev_id)
@@ -79,21 +105,48 @@ static int qcom_usb_extcon_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = extcon_set_property_capability(info->edev,
+			EXTCON_USB, EXTCON_PROP_USB_SS);
+	ret |= extcon_set_property_capability(info->edev,
+			EXTCON_USB_HOST, EXTCON_PROP_USB_SS);
+	if (ret) {
+		dev_err(dev, "failed to register extcon props rc=%d\n",
+						ret);
+		return ret;
+	}
+
 	info->debounce_jiffies = msecs_to_jiffies(USB_ID_DEBOUNCE_MS);
 	INIT_DELAYED_WORK(&info->wq_detcable, qcom_usb_extcon_detect_cable);
 
-	info->irq = platform_get_irq_byname(pdev, "usb_id");
-	if (info->irq < 0)
-		return info->irq;
+	info->id_irq = platform_get_irq_byname(pdev, "usb_id");
+	if (info->id_irq > 0) {
+		ret = devm_request_threaded_irq(dev, info->id_irq, NULL,
+					qcom_usb_irq_handler,
+					IRQF_TRIGGER_RISING |
+					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					pdev->name, info);
+		if (ret < 0) {
+			dev_err(dev, "failed to request handler for ID IRQ\n");
+			return ret;
+		}
+	}
 
-	ret = devm_request_threaded_irq(dev, info->irq, NULL,
+	info->vbus_irq = platform_get_irq_byname(pdev, "usb_vbus");
+	if (info->vbus_irq > 0) {
+		ret = devm_request_threaded_irq(dev, info->vbus_irq, NULL,
 					qcom_usb_irq_handler,
 					IRQF_TRIGGER_RISING |
 					IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
 					pdev->name, info);
-	if (ret < 0) {
-		dev_err(dev, "failed to request handler for ID IRQ\n");
-		return ret;
+		if (ret < 0) {
+			dev_err(dev, "failed to request handler for VBUS IRQ\n");
+			return ret;
+		}
+	}
+
+	if (info->id_irq < 0 && info->vbus_irq < 0) {
+		dev_err(dev, "ID and VBUS IRQ not found\n");
+		return -EINVAL;
 	}
 
 	platform_set_drvdata(pdev, info);
@@ -120,8 +173,12 @@ static int qcom_usb_extcon_suspend(struct device *dev)
 	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
 	int ret = 0;
 
-	if (device_may_wakeup(dev))
-		ret = enable_irq_wake(info->irq);
+	if (device_may_wakeup(dev)) {
+		if (info->id_irq > 0)
+			ret = enable_irq_wake(info->id_irq);
+		if (info->vbus_irq > 0)
+			ret = enable_irq_wake(info->vbus_irq);
+	}
 
 	return ret;
 }
@@ -131,8 +188,12 @@ static int qcom_usb_extcon_resume(struct device *dev)
 	struct qcom_usb_extcon_info *info = dev_get_drvdata(dev);
 	int ret = 0;
 
-	if (device_may_wakeup(dev))
-		ret = disable_irq_wake(info->irq);
+	if (device_may_wakeup(dev)) {
+		if (info->id_irq > 0)
+			ret = disable_irq_wake(info->id_irq);
+		if (info->vbus_irq > 0)
+			ret = disable_irq_wake(info->vbus_irq);
+	}
 
 	return ret;
 }

drivers/extcon/extcon-sm5502.c

@@ -144,6 +144,7 @@ enum sm5502_muic_acc_type {
 	SM5502_MUIC_ADC_AUDIO_TYPE1_FULL_REMOTE = 0x3e,	/* |      001|11110| */
 	SM5502_MUIC_ADC_AUDIO_TYPE1_SEND_END = 0x5e,	/* |      010|11110| */
 							/* |Dev Type1|--ADC| */
+	SM5502_MUIC_ADC_GROUND_USB_OTG = 0x80,		/* |      100|00000| */
 	SM5502_MUIC_ADC_OPEN_USB = 0x5f,		/* |      010|11111| */
 	SM5502_MUIC_ADC_OPEN_TA = 0xdf,			/* |      110|11111| */
 	SM5502_MUIC_ADC_OPEN_USB_OTG = 0xff,		/* |      111|11111| */
@@ -291,11 +292,27 @@ static unsigned int sm5502_muic_get_cable_type(struct sm5502_muic_info *info)
 	 * connected with to MUIC device.
 	 */
 	cable_type = adc & SM5502_REG_ADC_MASK;
-	if (cable_type == SM5502_MUIC_ADC_GROUND)
-		return SM5502_MUIC_ADC_GROUND;
 
 	switch (cable_type) {
 	case SM5502_MUIC_ADC_GROUND:
+		ret = regmap_read(info->regmap, SM5502_REG_DEV_TYPE1,
+				  &dev_type1);
+		if (ret) {
+			dev_err(info->dev, "failed to read DEV_TYPE1 reg\n");
+			return ret;
+		}
+
+		switch (dev_type1) {
+		case SM5502_REG_DEV_TYPE1_USB_OTG_MASK:
+			cable_type = SM5502_MUIC_ADC_GROUND_USB_OTG;
+			break;
+		default:
+			dev_dbg(info->dev,
+				"cannot identify the cable type: adc(0x%x), dev_type1(0x%x)\n",
+				adc, dev_type1);
+			return -EINVAL;
+		}
+		break;
 	case SM5502_MUIC_ADC_SEND_END_BUTTON:
 	case SM5502_MUIC_ADC_REMOTE_S1_BUTTON:
 	case SM5502_MUIC_ADC_REMOTE_S2_BUTTON:
@@ -396,6 +413,7 @@ static int sm5502_muic_cable_handler(struct sm5502_muic_info *info,
 		con_sw	= DM_DP_SWITCH_OPEN;
 		vbus_sw	= VBUSIN_SWITCH_VBUSOUT;
 		break;
+	case SM5502_MUIC_ADC_GROUND_USB_OTG:
 	case SM5502_MUIC_ADC_OPEN_USB_OTG:
 		id	= EXTCON_USB_HOST;
 		con_sw	= DM_DP_SWITCH_USB;