Skip to content

L
linux
Commit b1f71bd0 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge branch 'omap/headers4' into next/dt 

These changes are needed for the following omap DT changes
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parents 591d07bf 6ba54ab4
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 6114 additions and 5284 deletions
arch/arm/Kconfig
View file @ b1f71bd0
......@@ -937,7 +937,6 @@ config ARCH_OMAP
select CLKSRC_MMIO
select GENERIC_CLOCKEVENTS
select HAVE_CLK
select NEED_MACH_GPIO_H
help
Support for TI's OMAP platform (OMAP1/2/3/4).
......
arch/arm/mach-omap1/Makefile
View file @ b1f71bd0
......@@ -3,7 +3,8 @@
#
# Common support
obj-y := io.o id.o sram.o time.o irq.o mux.o flash.o serial.o devices.o dma.o
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
serial.o devices.o dma.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
......
arch/arm/mach-omap1/board-ams-delta.c
View file @ b1f71bd0
......@@ -625,7 +625,6 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)")
.atag_offset = 0x100,
.map_io = ams_delta_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = ams_delta_init,
.init_late = ams_delta_init_late,
......
arch/arm/mach-omap1/board-fsample.c
View file @ b1f71bd0
......@@ -27,16 +27,16 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <mach/flash.h>
#include <plat/fpga.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
/* fsample is pretty close to p2-sample */
......@@ -123,9 +123,9 @@ static struct resource smc91x_resources[] = {
static void __init fsample_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
......@@ -362,7 +362,6 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
.atag_offset = 0x100,
.map_io = omap_fsample_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_fsample_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-generic.c
View file @ b1f71bd0
......@@ -81,7 +81,6 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_generic_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-h2-mmc.c
View file @ b1f71bd0
......@@ -13,12 +13,11 @@
*/
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
#include "board-h2.h"
#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
......
arch/arm/mach-omap1/board-h2.c
View file @ b1f71bd0
......@@ -39,8 +39,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
#include <mach/flash.h>
......@@ -50,6 +50,7 @@
#include "common.h"
#include "board-h2.h"
#include "dma.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define OMAP1610_ETHR_START 0x04000300
......@@ -458,7 +459,6 @@ MACHINE_START(OMAP_H2, "TI-H2")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h2_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-h3-mmc.c
View file @ b1f71bd0
......@@ -16,9 +16,8 @@
#include <linux/i2c/tps65010.h>
#include <plat/mmc.h>
#include "board-h3.h"
#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
......
arch/arm/mach-omap1/board-h3.c
View file @ b1f71bd0
......@@ -41,9 +41,9 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <mach/flash.h>
#include <mach/hardware.h>
......@@ -452,7 +452,6 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = h3_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-htcherald.c
View file @ b1f71bd0
......@@ -43,7 +43,7 @@
#include <asm/mach/arch.h>
#include <mach/omap7xx.h>
#include <plat/mmc.h>
#include "mmc.h"
#include <mach/irqs.h>
#include <mach/usb.h>
......@@ -600,7 +600,6 @@ MACHINE_START(HERALD, "HTC Herald")
.atag_offset = 0x100,
.map_io = htcherald_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = htcherald_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-innovator.c
View file @ b1f71bd0
......@@ -33,16 +33,15 @@
#include <mach/mux.h>
#include <mach/flash.h>
#include <plat/fpga.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <linux/platform_data/keypad-omap.h>
#include <plat/mmc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "iomap.h"
#include "common.h"
#include "mmc.h"
/* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
#define INNOVATOR1610_ETHR_START 0x04000300
......@@ -215,7 +214,7 @@ static struct platform_device *innovator1510_devices[] __initdata = {
static int innovator_get_pendown_state(void)
{
return !(fpga_read(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
return !(__raw_readb(OMAP1510_FPGA_TOUCHSCREEN) & (1 << 5));
}
static const struct ads7846_platform_data innovator1510_ts_info = {
......@@ -279,7 +278,7 @@ static struct platform_device *innovator1610_devices[] __initdata = {
static void __init innovator_init_smc91x(void)
{
if (cpu_is_omap1510()) {
fpga_write(fpga_read(OMAP1510_FPGA_RST) & ~1,
__raw_writeb(__raw_readb(OMAP1510_FPGA_RST) & ~1,
OMAP1510_FPGA_RST);
udelay(750);
} else {
......@@ -335,10 +334,10 @@ static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
if (power_on)
fpga_write(fpga_read(OMAP1510_FPGA_POWER) | (1 << 3),
__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) | (1 << 3),
OMAP1510_FPGA_POWER);
else
fpga_write(fpga_read(OMAP1510_FPGA_POWER) & ~(1 << 3),
__raw_writeb(__raw_readb(OMAP1510_FPGA_POWER) & ~(1 << 3),
OMAP1510_FPGA_POWER);
return 0;
......@@ -390,14 +389,14 @@ static void __init innovator_init(void)
omap_cfg_reg(UART3_TX);
omap_cfg_reg(UART3_RX);
reg = fpga_read(OMAP1510_FPGA_POWER);
reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM1_EN;
fpga_write(reg, OMAP1510_FPGA_POWER);
__raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
reg = fpga_read(OMAP1510_FPGA_POWER);
reg = __raw_readb(OMAP1510_FPGA_POWER);
reg |= OMAP1510_FPGA_PCR_COM2_EN;
fpga_write(reg, OMAP1510_FPGA_POWER);
__raw_writeb(reg, OMAP1510_FPGA_POWER);
udelay(10);
platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
......@@ -437,6 +436,7 @@ static void __init innovator_init(void)
*/
static void __init innovator_map_io(void)
{
#ifdef CONFIG_ARCH_OMAP15XX
omap15xx_map_io();
iotable_init(innovator1510_io_desc, ARRAY_SIZE(innovator1510_io_desc));
......@@ -444,9 +444,10 @@ static void __init innovator_map_io(void)
/* Dump the Innovator FPGA rev early - useful info for support. */
pr_debug("Innovator FPGA Rev %d.%d Board Rev %d\n",
fpga_read(OMAP1510_FPGA_REV_HIGH),
fpga_read(OMAP1510_FPGA_REV_LOW),
fpga_read(OMAP1510_FPGA_BOARD_REV));
__raw_readb(OMAP1510_FPGA_REV_HIGH),
__raw_readb(OMAP1510_FPGA_REV_LOW),
__raw_readb(OMAP1510_FPGA_BOARD_REV));
#endif
}
MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
......@@ -454,7 +455,6 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator")
.atag_offset = 0x100,
.map_io = innovator_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = innovator_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-nokia770.c
View file @ b1f71bd0
......@@ -29,13 +29,13 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/mmc.h>
#include <plat/clock.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
#include "clock.h"
#include "mmc.h"
#define ADS7846_PENDOWN_GPIO 15
......@@ -251,7 +251,6 @@ MACHINE_START(NOKIA770, "Nokia 770")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_nokia770_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-osk.c
View file @ b1f71bd0
......@@ -48,7 +48,7 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
......@@ -606,7 +606,6 @@ MACHINE_START(OMAP_OSK, "TI-OSK")
.atag_offset = 0x100,
.map_io = omap16xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = osk_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-palmte.c
View file @ b1f71bd0
......@@ -36,8 +36,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <mach/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
......@@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
#define PALMTE_USBDETECT_GPIO 0
#define PALMTE_USB_OR_DC_GPIO 1
......@@ -264,7 +265,6 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmte_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-palmtt.c
View file @ b1f71bd0
......@@ -28,16 +28,16 @@
#include <linux/spi/spi.h>
#include <linux/spi/ads7846.h>
#include <linux/platform_data/omap1_bl.h>
#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/led.h>
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
......@@ -45,6 +45,7 @@
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
#define PALMTT_USBDETECT_GPIO 0
#define PALMTT_CABLE_GPIO 1
......@@ -310,7 +311,6 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmtt_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-palmz71.c
View file @ b1f71bd0
......@@ -38,8 +38,8 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irda.h>
#include <linux/platform_data/keypad-omap.h>
......@@ -47,6 +47,7 @@
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
#define PALMZ71_USBDETECT_GPIO 0
#define PALMZ71_PENIRQ_GPIO 6
......@@ -326,7 +327,6 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_palmz71_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-perseus2.c
View file @ b1f71bd0
......@@ -28,15 +28,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <plat/fpga.h>
#include <mach/flash.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
static const unsigned int p2_keymap[] = {
KEY(0, 0, KEY_UP),
......@@ -231,9 +231,9 @@ static struct omap_lcd_config perseus2_lcd_config __initdata = {
static void __init perseus2_init_smc91x(void)
{
fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
__raw_writeb(1, H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
__raw_writeb(__raw_readb(H2P2_DBG_FPGA_LAN_RESET) & ~1,
H2P2_DBG_FPGA_LAN_RESET);
mdelay(50);
}
......@@ -324,7 +324,6 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
.atag_offset = 0x100,
.map_io = omap_perseus2_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_perseus2_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-sx1-mmc.c
View file @ b1f71bd0
......@@ -16,9 +16,10 @@
#include <linux/platform_device.h>
#include <mach/hardware.h>
#include <plat/mmc.h>
#include <mach/board-sx1.h>
#include "mmc.h"
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
static int mmc_set_power(struct device *dev, int slot, int power_on,
......
arch/arm/mach-omap1/board-sx1.c
View file @ b1f71bd0
......@@ -36,15 +36,16 @@
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <mach/irda.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/board-sx1.h>
#include <mach/hardware.h>
#include <mach/usb.h>
#include "common.h"
#include "dma.h"
/* Write to I2C device */
int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
......@@ -403,7 +404,6 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = omap_sx1_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/board-voiceblue.c
View file @ b1f71bd0
......@@ -34,7 +34,7 @@
#include <mach/board-voiceblue.h>
#include <mach/flash.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/hardware.h>
#include <mach/usb.h>
......@@ -286,7 +286,6 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910")
.atag_offset = 0x100,
.map_io = omap15xx_map_io,
.init_early = omap1_init_early,
.reserve = omap_reserve,
.init_irq = omap1_init_irq,
.init_machine = voiceblue_init,
.init_late = omap1_init_late,
......
arch/arm/mach-omap1/clock.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap1/clock.h
View file @ b1f71bd0
......@@ -14,8 +14,184 @@
#define __ARCH_ARM_MACH_OMAP1_CLOCK_H
#include <linux/clk.h>
#include <linux/list.h>
#include <plat/clock.h>
#include <linux/clkdev.h>
struct module;
struct clk;
struct omap_clk {
u16 cpu;
struct clk_lookup lk;
};
#define CLK(dev, con, ck, cp) \
{ \
.cpu = cp, \
.lk = { \
.dev_id = dev, \
.con_id = con, \
.clk = ck, \
}, \
}
/* Platform flags for the clkdev-OMAP integration code */
#define CK_310 (1 << 0)
#define CK_7XX (1 << 1) /* 7xx, 850 */
#define CK_1510 (1 << 2)
#define CK_16XX (1 << 3) /* 16xx, 17xx, 5912 */
#define CK_1710 (1 << 4) /* 1710 extra for rate selection */
/* Temporary, needed during the common clock framework conversion */
#define __clk_get_name(clk) (clk->name)
#define __clk_get_parent(clk) (clk->parent)
#define __clk_get_rate(clk) (clk->rate)
/**
* struct clkops - some clock function pointers
* @enable: fn ptr that enables the current clock in hardware
* @disable: fn ptr that enables the current clock in hardware
* @find_idlest: function returning the IDLEST register for the clock's IP blk
* @find_companion: function returning the "companion" clk reg for the clock
* @allow_idle: fn ptr that enables autoidle for the current clock in hardware
* @deny_idle: fn ptr that disables autoidle for the current clock in hardware
*
* A "companion" clk is an accompanying clock to the one being queried
* that must be enabled for the IP module connected to the clock to
* become accessible by the hardware. Neither @find_idlest nor
* @find_companion should be needed; that information is IP
* block-specific; the hwmod code has been created to handle this, but
* until hwmod data is ready and drivers have been converted to use PM
* runtime calls in place of clk_enable()/clk_disable(), @find_idlest and
* @find_companion must, unfortunately, remain.
*/
struct clkops {
int (*enable)(struct clk *);
void (*disable)(struct clk *);
void (*find_idlest)(struct clk *, void __iomem **,
u8 *, u8 *);
void (*find_companion)(struct clk *, void __iomem **,
u8 *);
void (*allow_idle)(struct clk *);
void (*deny_idle)(struct clk *);
};
/*
* struct clk.flags possibilities
*
* XXX document the rest of the clock flags here
*
* CLOCK_CLKOUTX2: (OMAP4 only) DPLL CLKOUT and CLKOUTX2 GATE_CTRL
* bits share the same register. This flag allows the
* omap4_dpllmx*() code to determine which GATE_CTRL bit field
* should be used. This is a temporary solution - a better approach
* would be to associate clock type-specific data with the clock,
* similar to the struct dpll_data approach.
*/
#define ENABLE_REG_32BIT (1 << 0) /* Use 32-bit access */
#define CLOCK_IDLE_CONTROL (1 << 1)
#define CLOCK_NO_IDLE_PARENT (1 << 2)
#define ENABLE_ON_INIT (1 << 3) /* Enable upon framework init */
#define INVERT_ENABLE (1 << 4) /* 0 enables, 1 disables */
#define CLOCK_CLKOUTX2 (1 << 5)
/**
* struct clk - OMAP struct clk
* @node: list_head connecting this clock into the full clock list
* @ops: struct clkops * for this clock
* @name: the name of the clock in the hardware (used in hwmod data and debug)
* @parent: pointer to this clock's parent struct clk
* @children: list_head connecting to the child clks' @sibling list_heads
* @sibling: list_head connecting this clk to its parent clk's @children
* @rate: current clock rate
* @enable_reg: register to write to enable the clock (see @enable_bit)
* @recalc: fn ptr that returns the clock's current rate
* @set_rate: fn ptr that can change the clock's current rate
* @round_rate: fn ptr that can round the clock's current rate
* @init: fn ptr to do clock-specific initialization
* @enable_bit: bitshift to write to enable/disable the clock (see @enable_reg)
* @usecount: number of users that have requested this clock to be enabled
* @fixed_div: when > 0, this clock's rate is its parent's rate / @fixed_div
* @flags: see "struct clk.flags possibilities" above
* @rate_offset: bitshift for rate selection bitfield (OMAP1 only)
* @src_offset: bitshift for source selection bitfield (OMAP1 only)
*
* XXX @rate_offset, @src_offset should probably be removed and OMAP1
* clock code converted to use clksel.
*
* XXX @usecount is poorly named. It should be "enable_count" or
* something similar. "users" in the description refers to kernel
* code (core code or drivers) that have called clk_enable() and not
* yet called clk_disable(); the usecount of parent clocks is also
* incremented by the clock code when clk_enable() is called on child
* clocks and decremented by the clock code when clk_disable() is
* called on child clocks.
*
* XXX @clkdm, @usecount, @children, @sibling should be marked for
* internal use only.
*
* @children and @sibling are used to optimize parent-to-child clock
* tree traversals. (child-to-parent traversals use @parent.)
*
* XXX The notion of the clock's current rate probably needs to be
* separated from the clock's target rate.
*/
struct clk {
struct list_head node;
const struct clkops *ops;
const char *name;
struct clk *parent;
struct list_head children;
struct list_head sibling; /* node for children */
unsigned long rate;
void __iomem *enable_reg;
unsigned long (*recalc)(struct clk *);
int (*set_rate)(struct clk *, unsigned long);
long (*round_rate)(struct clk *, unsigned long);
void (*init)(struct clk *);
u8 enable_bit;
s8 usecount;
u8 fixed_div;
u8 flags;
u8 rate_offset;
u8 src_offset;
#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
struct dentry *dent; /* For visible tree hierarchy */
#endif
};
struct clk_functions {
int (*clk_enable)(struct clk *clk);
void (*clk_disable)(struct clk *clk);
long (*clk_round_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_rate)(struct clk *clk, unsigned long rate);
int (*clk_set_parent)(struct clk *clk, struct clk *parent);
void (*clk_allow_idle)(struct clk *clk);
void (*clk_deny_idle)(struct clk *clk);
void (*clk_disable_unused)(struct clk *clk);
};
extern int mpurate;
extern int clk_init(struct clk_functions *custom_clocks);
extern void clk_preinit(struct clk *clk);
extern int clk_register(struct clk *clk);
extern void clk_reparent(struct clk *child, struct clk *parent);
extern void clk_unregister(struct clk *clk);
extern void propagate_rate(struct clk *clk);
extern void recalculate_root_clocks(void);
extern unsigned long followparent_recalc(struct clk *clk);
extern void clk_enable_init_clocks(void);
unsigned long omap_fixed_divisor_recalc(struct clk *clk);
extern struct clk *omap_clk_get_by_name(const char *name);
extern int omap_clk_enable_autoidle_all(void);
extern int omap_clk_disable_autoidle_all(void);
extern const struct clkops clkops_null;
extern struct clk dummy_ck;
int omap1_clk_init(void);
void omap1_clk_late_init(void);
......
arch/arm/mach-omap1/clock_data.c
View file @ b1f71bd0
......@@ -22,16 +22,14 @@
#include <asm/mach-types.h> /* for machine_is_* */
#include <plat/clock.h>
#include <plat/cpu.h>
#include <plat/clkdev_omap.h>
#include <plat/sram.h> /* for omap_sram_reprogram_clock() */
#include "soc.h"
#include <mach/hardware.h>
#include <mach/usb.h> /* for OTG_BASE */
#include "iomap.h"
#include "clock.h"
#include "sram.h"
/* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */
#define IDL_CLKOUT_ARM_SHIFT 12
......@@ -765,14 +763,6 @@ static struct omap_clk omap_clks[] = {
* init
*/
static struct clk_functions omap1_clk_functions = {
.clk_enable = omap1_clk_enable,
.clk_disable = omap1_clk_disable,
.clk_round_rate = omap1_clk_round_rate,
.clk_set_rate = omap1_clk_set_rate,
.clk_disable_unused = omap1_clk_disable_unused,
};
static void __init omap1_show_rates(void)
{
pr_notice("Clocking rate (xtal/DPLL1/MPU): %ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
......@@ -803,8 +793,6 @@ int __init omap1_clk_init(void)
if (!cpu_is_omap15xx())
omap_writew(0, SOFT_REQ_REG2);
clk_init(&omap1_clk_functions);
/* By default all idlect1 clocks are allowed to idle */
arm_idlect1_mask = ~0;
......
arch/arm/mach-omap1/common.h
View file @ b1f71bd0
......@@ -26,8 +26,10 @@
#ifndef __ARCH_ARM_MACH_OMAP1_COMMON_H
#define __ARCH_ARM_MACH_OMAP1_COMMON_H
#include <plat/common.h>
#include <linux/mtd/mtd.h>
#include <linux/i2c-omap.h>
#include <plat/i2c.h>
#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
void omap7xx_map_io(void);
......@@ -38,6 +40,7 @@ static inline void omap7xx_map_io(void)
#endif
#ifdef CONFIG_ARCH_OMAP15XX
void omap1510_fpga_init_irq(void);
void omap15xx_map_io(void);
#else
static inline void omap15xx_map_io(void)
......
arch/arm/mach-omap1/devices.c
View file @ b1f71bd0
......@@ -19,10 +19,8 @@
#include <asm/mach/map.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat/mmc.h>
#include <mach/omap7xx.h>
#include <mach/camera.h>
......@@ -30,6 +28,9 @@
#include "common.h"
#include "clock.h"
#include "dma.h"
#include "mmc.h"
#include "sram.h"
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
......@@ -175,6 +176,13 @@ static int __init omap_mmc_add(const char *name, int id, unsigned long base,
res[3].name = "tx";
res[3].flags = IORESOURCE_DMA;
if (cpu_is_omap7xx())
data->slots[0].features = MMC_OMAP7XX;
if (cpu_is_omap15xx())
data->slots[0].features = MMC_OMAP15XX;
if (cpu_is_omap16xx())
data->slots[0].features = MMC_OMAP16XX;
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret == 0)
ret = platform_device_add_data(pdev, data, sizeof(*data));
......
arch/arm/mach-omap1/dma.c
View file @ b1f71bd0
......@@ -25,11 +25,13 @@
#include <linux/device.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <plat/tc.h>
#include <plat-omap/dma-omap.h>
#include <mach/tc.h>
#include <mach/irqs.h>
#include "dma.h"
#define OMAP1_DMA_BASE (0xfffed800)
#define OMAP1_LOGICAL_DMA_CH_COUNT 17
#define OMAP1_DMA_STRIDE 0x40
......@@ -319,6 +321,9 @@ static int __init omap1_system_dma_init(void)
d->dev_caps = ENABLE_1510_MODE;
enable_1510_mode = d->dev_caps & ENABLE_1510_MODE;
if (cpu_is_omap16xx())
d->dev_caps = ENABLE_16XX_MODE;
d->dev_caps |= SRC_PORT;
d->dev_caps |= DST_PORT;
d->dev_caps |= SRC_INDEX;
......
arch/arm/mach-omap1/dma.h 0 → 100644
View file @ b1f71bd0
/*
* OMAP1 DMA channel definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __OMAP1_DMA_CHANNEL_H
#define __OMAP1_DMA_CHANNEL_H
/* DMA channels for omap1 */
#define OMAP_DMA_NO_DEVICE 0
#define OMAP_DMA_MCSI1_TX 1
#define OMAP_DMA_MCSI1_RX 2
#define OMAP_DMA_I2C_RX 3
#define OMAP_DMA_I2C_TX 4
#define OMAP_DMA_EXT_NDMA_REQ 5
#define OMAP_DMA_EXT_NDMA_REQ2 6
#define OMAP_DMA_UWIRE_TX 7
#define OMAP_DMA_MCBSP1_TX 8
#define OMAP_DMA_MCBSP1_RX 9
#define OMAP_DMA_MCBSP3_TX 10
#define OMAP_DMA_MCBSP3_RX 11
#define OMAP_DMA_UART1_TX 12
#define OMAP_DMA_UART1_RX 13
#define OMAP_DMA_UART2_TX 14
#define OMAP_DMA_UART2_RX 15
#define OMAP_DMA_MCBSP2_TX 16
#define OMAP_DMA_MCBSP2_RX 17
#define OMAP_DMA_UART3_TX 18
#define OMAP_DMA_UART3_RX 19
#define OMAP_DMA_CAMERA_IF_RX 20
#define OMAP_DMA_MMC_TX 21
#define OMAP_DMA_MMC_RX 22
#define OMAP_DMA_NAND 23
#define OMAP_DMA_IRQ_LCD_LINE 24
#define OMAP_DMA_MEMORY_STICK 25
#define OMAP_DMA_USB_W2FC_RX0 26
#define OMAP_DMA_USB_W2FC_RX1 27
#define OMAP_DMA_USB_W2FC_RX2 28
#define OMAP_DMA_USB_W2FC_TX0 29
#define OMAP_DMA_USB_W2FC_TX1 30
#define OMAP_DMA_USB_W2FC_TX2 31
/* These are only for 1610 */
#define OMAP_DMA_CRYPTO_DES_IN 32
#define OMAP_DMA_SPI_TX 33
#define OMAP_DMA_SPI_RX 34
#define OMAP_DMA_CRYPTO_HASH 35
#define OMAP_DMA_CCP_ATTN 36
#define OMAP_DMA_CCP_FIFO_NOT_EMPTY 37
#define OMAP_DMA_CMT_APE_TX_CHAN_0 38
#define OMAP_DMA_CMT_APE_RV_CHAN_0 39
#define OMAP_DMA_CMT_APE_TX_CHAN_1 40
#define OMAP_DMA_CMT_APE_RV_CHAN_1 41
#define OMAP_DMA_CMT_APE_TX_CHAN_2 42
#define OMAP_DMA_CMT_APE_RV_CHAN_2 43
#define OMAP_DMA_CMT_APE_TX_CHAN_3 44
#define OMAP_DMA_CMT_APE_RV_CHAN_3 45
#define OMAP_DMA_CMT_APE_TX_CHAN_4 46
#define OMAP_DMA_CMT_APE_RV_CHAN_4 47
#define OMAP_DMA_CMT_APE_TX_CHAN_5 48
#define OMAP_DMA_CMT_APE_RV_CHAN_5 49
#define OMAP_DMA_CMT_APE_TX_CHAN_6 50
#define OMAP_DMA_CMT_APE_RV_CHAN_6 51
#define OMAP_DMA_CMT_APE_TX_CHAN_7 52
#define OMAP_DMA_CMT_APE_RV_CHAN_7 53
#define OMAP_DMA_MMC2_TX 54
#define OMAP_DMA_MMC2_RX 55
#define OMAP_DMA_CRYPTO_DES_OUT 56
#endif /* __OMAP1_DMA_CHANNEL_H */
arch/arm/mach-omap1/flash.c
View file @ b1f71bd0
......@@ -10,7 +10,7 @@
#include <linux/mtd/mtd.h>
#include <linux/mtd/map.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/flash.h>
#include <mach/hardware.h>
......
arch/arm/mach-omap1/fpga.c
View file @ b1f71bd0
......@@ -27,11 +27,11 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/fpga.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "common.h"
#include "fpga.h"
static void fpga_mask_irq(struct irq_data *d)
{
......
arch/arm/mach-omap1/fpga.h 0 → 100644
View file @ b1f71bd0
/*
* Interrupt handler for OMAP-1510 FPGA
*
* Copyright (C) 2001 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* Copyright (C) 2002 MontaVista Software, Inc.
*
* Separated FPGA interrupts from innovator1510.c and cleaned up for 2.6
* Copyright (C) 2004 Nokia Corporation by Tony Lindrgen <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_OMAP_FPGA_H
#define __ASM_ARCH_OMAP_FPGA_H
/*
* ---------------------------------------------------------------------------
* H2/P2 Debug board FPGA
* ---------------------------------------------------------------------------
*/
/* maps in the FPGA registers and the ETHR registers */
#define H2P2_DBG_FPGA_BASE 0xE8000000 /* VA */
#define H2P2_DBG_FPGA_SIZE SZ_4K /* SIZE */
#define H2P2_DBG_FPGA_START 0x04000000 /* PA */
#define H2P2_DBG_FPGA_ETHR_START (H2P2_DBG_FPGA_START + 0x300)
#define H2P2_DBG_FPGA_FPGA_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x10) /* FPGA Revision */
#define H2P2_DBG_FPGA_BOARD_REV IOMEM(H2P2_DBG_FPGA_BASE + 0x12) /* Board Revision */
#define H2P2_DBG_FPGA_GPIO IOMEM(H2P2_DBG_FPGA_BASE + 0x14) /* GPIO outputs */
#define H2P2_DBG_FPGA_LEDS IOMEM(H2P2_DBG_FPGA_BASE + 0x16) /* LEDs outputs */
#define H2P2_DBG_FPGA_MISC_INPUTS IOMEM(H2P2_DBG_FPGA_BASE + 0x18) /* Misc inputs */
#define H2P2_DBG_FPGA_LAN_STATUS IOMEM(H2P2_DBG_FPGA_BASE + 0x1A) /* LAN Status line */
#define H2P2_DBG_FPGA_LAN_RESET IOMEM(H2P2_DBG_FPGA_BASE + 0x1C) /* LAN Reset line */
/* LEDs definition on debug board (16 LEDs, all physically green) */
#define H2P2_DBG_FPGA_LED_GREEN (1 << 15)
#define H2P2_DBG_FPGA_LED_AMBER (1 << 14)
#define H2P2_DBG_FPGA_LED_RED (1 << 13)
#define H2P2_DBG_FPGA_LED_BLUE (1 << 12)
/* cpu0 load-meter LEDs */
#define H2P2_DBG_FPGA_LOAD_METER (1 << 0) // A bit of fun on our board ...
#define H2P2_DBG_FPGA_LOAD_METER_SIZE 11
#define H2P2_DBG_FPGA_LOAD_METER_MASK ((1 << H2P2_DBG_FPGA_LOAD_METER_SIZE) - 1)
#define H2P2_DBG_FPGA_P2_LED_TIMER (1 << 0)
#define H2P2_DBG_FPGA_P2_LED_IDLE (1 << 1)
#endif
arch/arm/mach-omap1/gpio15xx.c
View file @ b1f71bd0
......@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/irqs.h>
#define OMAP1_MPUIO_VBASE OMAP1_MPUIO_BASE
#define OMAP1510_GPIO_BASE 0xFFFCE000
......
arch/arm/mach-omap1/gpio16xx.c
View file @ b1f71bd0
......@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/irqs.h>
#define OMAP1610_GPIO1_BASE 0xfffbe400
#define OMAP1610_GPIO2_BASE 0xfffbec00
#define OMAP1610_GPIO3_BASE 0xfffbb400
......
arch/arm/mach-omap1/gpio7xx.c
View file @ b1f71bd0
......@@ -19,6 +19,8 @@
#include <linux/gpio.h>
#include <linux/platform_data/gpio-omap.h>
#include <mach/irqs.h>
#define OMAP7XX_GPIO1_BASE 0xfffbc000
#define OMAP7XX_GPIO2_BASE 0xfffbc800
#define OMAP7XX_GPIO3_BASE 0xfffbd000
......
arch/arm/mach-omap1/i2c.c
View file @ b1f71bd0
......@@ -19,11 +19,25 @@
*
*/
#include <plat/i2c.h>
#include <linux/i2c-omap.h>
#include <mach/mux.h>
#include <plat/cpu.h>
#include "soc.h"
#include <plat/i2c.h>
#define OMAP_I2C_SIZE 0x3f
#define OMAP1_I2C_BASE 0xfffb3800
#define OMAP1_INT_I2C (32 + 4)
static const char name[] = "omap_i2c";
void __init omap1_i2c_mux_pins(int bus_id)
static struct resource i2c_resources[2] = {
};
static struct platform_device omap_i2c_devices[1] = {
};
static void __init omap1_i2c_mux_pins(int bus_id)
{
if (cpu_is_omap7xx()) {
omap_cfg_reg(I2C_7XX_SDA);
......@@ -33,3 +47,47 @@ void __init omap1_i2c_mux_pins(int bus_id)
omap_cfg_reg(I2C_SCL);
}
}
int __init omap_i2c_add_bus(struct omap_i2c_bus_platform_data *pdata,
int bus_id)
{
struct platform_device *pdev;
struct resource *res;
if (bus_id > 1)
return -EINVAL;
omap1_i2c_mux_pins(bus_id);
pdev = &omap_i2c_devices[bus_id - 1];
pdev->id = bus_id;
pdev->name = name;
pdev->num_resources = ARRAY_SIZE(i2c_resources);
res = i2c_resources;
res[0].start = OMAP1_I2C_BASE;
res[0].end = res[0].start + OMAP_I2C_SIZE;
res[0].flags = IORESOURCE_MEM;
res[1].start = OMAP1_INT_I2C;
res[1].flags = IORESOURCE_IRQ;
pdev->resource = res;
/* all OMAP1 have IP version 1 register set */
pdata->rev = OMAP_I2C_IP_VERSION_1;
/* all OMAP1 I2C are implemented like this */
pdata->flags = OMAP_I2C_FLAG_NO_FIFO |
OMAP_I2C_FLAG_SIMPLE_CLOCK |
OMAP_I2C_FLAG_16BIT_DATA_REG |
OMAP_I2C_FLAG_ALWAYS_ARMXOR_CLK;
/* how the cpu bus is wired up differs for 7xx only */
if (cpu_is_omap7xx())
pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_1;
else
pdata->flags |= OMAP_I2C_FLAG_BUS_SHIFT_2;
pdev->dev.platform_data = pdata;
return platform_device_register(pdev);
}
arch/arm/mach-omap1/id.c
View file @ b1f71bd0
......@@ -17,7 +17,7 @@
#include <linux/io.h>
#include <asm/system_info.h>
#include <plat/cpu.h>
#include "soc.h"
#include <mach/hardware.h>
......
arch/arm/mach-omap1/include/mach/debug-macro.S
View file @ b1f71bd0
......@@ -13,7 +13,7 @@
#include <linux/serial_reg.h>
#include <plat/serial.h>
#include "serial.h"
.pushsection .data
omap_uart_phys: .word 0x0
......
arch/arm/mach-omap1/include/mach/entry-macro.S
View file @ b1f71bd0
......@@ -13,8 +13,6 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include "../../iomap.h"
.macro get_irqnr_preamble, base, tmp
.endm
......
arch/arm/mach-omap1/include/mach/gpio.h deleted 100644 → 0
View file @ 591d07bf
/*
* arch/arm/mach-omap1/include/mach/gpio.h
*/
arch/arm/mach-omap1/include/mach/hardware.h
View file @ b1f71bd0
......@@ -39,7 +39,7 @@
#include <asm/sizes.h>
#ifndef __ASSEMBLER__
#include <asm/types.h>
#include <plat/cpu.h>
#include <mach/soc.h>
/*
* NOTE: Please use ioremap + __raw_read/write where possible instead of these
......@@ -51,7 +51,7 @@ extern void omap_writeb(u8 v, u32 pa);
extern void omap_writew(u16 v, u32 pa);
extern void omap_writel(u32 v, u32 pa);
#include <plat/tc.h>
#include <mach/tc.h>
/* Almost all documentation for chip and board memory maps assumes
* BM is clear. Most devel boards have a switch to control booting
......@@ -72,7 +72,10 @@ static inline u32 omap_cs3_phys(void)
#endif /* ifndef __ASSEMBLER__ */
#include <plat/serial.h>
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
#include <mach/serial.h>
/*
* ---------------------------------------------------------------------------
......
arch/arm/mach-omap1/include/mach/memory.h
View file @ b1f71bd0
......@@ -19,7 +19,7 @@
* because of the strncmp().
*/
#if defined(CONFIG_ARCH_OMAP15XX) && !defined(__ASSEMBLER__)
#include <plat/cpu.h>
#include <mach/soc.h>
/*
* OMAP-1510 Local Bus address offset
......
arch/arm/mach-omap1/include/mach/omap1510.h
View file @ b1f71bd0
......@@ -45,5 +45,118 @@
#define OMAP1510_DSP_MMU_BASE (0xfffed200)
/*
* ---------------------------------------------------------------------------
* OMAP-1510 FPGA
* ---------------------------------------------------------------------------
*/
#define OMAP1510_FPGA_BASE 0xE8000000 /* VA */
#define OMAP1510_FPGA_SIZE SZ_4K
#define OMAP1510_FPGA_START 0x08000000 /* PA */
/* Revision */
#define OMAP1510_FPGA_REV_LOW IOMEM(OMAP1510_FPGA_BASE + 0x0)
#define OMAP1510_FPGA_REV_HIGH IOMEM(OMAP1510_FPGA_BASE + 0x1)
#define OMAP1510_FPGA_LCD_PANEL_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x2)
#define OMAP1510_FPGA_LED_DIGIT IOMEM(OMAP1510_FPGA_BASE + 0x3)
#define INNOVATOR_FPGA_HID_SPI IOMEM(OMAP1510_FPGA_BASE + 0x4)
#define OMAP1510_FPGA_POWER IOMEM(OMAP1510_FPGA_BASE + 0x5)
/* Interrupt status */
#define OMAP1510_FPGA_ISR_LO IOMEM(OMAP1510_FPGA_BASE + 0x6)
#define OMAP1510_FPGA_ISR_HI IOMEM(OMAP1510_FPGA_BASE + 0x7)
/* Interrupt mask */
#define OMAP1510_FPGA_IMR_LO IOMEM(OMAP1510_FPGA_BASE + 0x8)
#define OMAP1510_FPGA_IMR_HI IOMEM(OMAP1510_FPGA_BASE + 0x9)
/* Reset registers */
#define OMAP1510_FPGA_HOST_RESET IOMEM(OMAP1510_FPGA_BASE + 0xa)
#define OMAP1510_FPGA_RST IOMEM(OMAP1510_FPGA_BASE + 0xb)
#define OMAP1510_FPGA_AUDIO IOMEM(OMAP1510_FPGA_BASE + 0xc)
#define OMAP1510_FPGA_DIP IOMEM(OMAP1510_FPGA_BASE + 0xe)
#define OMAP1510_FPGA_FPGA_IO IOMEM(OMAP1510_FPGA_BASE + 0xf)
#define OMAP1510_FPGA_UART1 IOMEM(OMAP1510_FPGA_BASE + 0x14)
#define OMAP1510_FPGA_UART2 IOMEM(OMAP1510_FPGA_BASE + 0x15)
#define OMAP1510_FPGA_OMAP1510_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x16)
#define OMAP1510_FPGA_BOARD_REV IOMEM(OMAP1510_FPGA_BASE + 0x18)
#define INNOVATOR_FPGA_CAM_USB_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20c)
#define OMAP1510P1_PPT_DATA IOMEM(OMAP1510_FPGA_BASE + 0x100)
#define OMAP1510P1_PPT_STATUS IOMEM(OMAP1510_FPGA_BASE + 0x101)
#define OMAP1510P1_PPT_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x102)
#define OMAP1510_FPGA_TOUCHSCREEN IOMEM(OMAP1510_FPGA_BASE + 0x204)
#define INNOVATOR_FPGA_INFO IOMEM(OMAP1510_FPGA_BASE + 0x205)
#define INNOVATOR_FPGA_LCD_BRIGHT_LO IOMEM(OMAP1510_FPGA_BASE + 0x206)
#define INNOVATOR_FPGA_LCD_BRIGHT_HI IOMEM(OMAP1510_FPGA_BASE + 0x207)
#define INNOVATOR_FPGA_LED_GRN_LO IOMEM(OMAP1510_FPGA_BASE + 0x208)
#define INNOVATOR_FPGA_LED_GRN_HI IOMEM(OMAP1510_FPGA_BASE + 0x209)
#define INNOVATOR_FPGA_LED_RED_LO IOMEM(OMAP1510_FPGA_BASE + 0x20a)
#define INNOVATOR_FPGA_LED_RED_HI IOMEM(OMAP1510_FPGA_BASE + 0x20b)
#define INNOVATOR_FPGA_EXP_CONTROL IOMEM(OMAP1510_FPGA_BASE + 0x20d)
#define INNOVATOR_FPGA_ISR2 IOMEM(OMAP1510_FPGA_BASE + 0x20e)
#define INNOVATOR_FPGA_IMR2 IOMEM(OMAP1510_FPGA_BASE + 0x210)
#define OMAP1510_FPGA_ETHR_START (OMAP1510_FPGA_START + 0x300)
/*
* Power up Giga UART driver, turn on HID clock.
* Turn off BT power, since we're not using it and it
* draws power.
*/
#define OMAP1510_FPGA_RESET_VALUE 0x42
#define OMAP1510_FPGA_PCR_IF_PD0 (1 << 7)
#define OMAP1510_FPGA_PCR_COM2_EN (1 << 6)
#define OMAP1510_FPGA_PCR_COM1_EN (1 << 5)
#define OMAP1510_FPGA_PCR_EXP_PD0 (1 << 4)
#define OMAP1510_FPGA_PCR_EXP_PD1 (1 << 3)
#define OMAP1510_FPGA_PCR_48MHZ_CLK (1 << 2)
#define OMAP1510_FPGA_PCR_4MHZ_CLK (1 << 1)
#define OMAP1510_FPGA_PCR_RSRVD_BIT0 (1 << 0)
/*
* Innovator/OMAP1510 FPGA HID register bit definitions
*/
#define OMAP1510_FPGA_HID_SCLK (1<<0) /* output */
#define OMAP1510_FPGA_HID_MOSI (1<<1) /* output */
#define OMAP1510_FPGA_HID_nSS (1<<2) /* output 0/1 chip idle/select */
#define OMAP1510_FPGA_HID_nHSUS (1<<3) /* output 0/1 host active/suspended */
#define OMAP1510_FPGA_HID_MISO (1<<4) /* input */
#define OMAP1510_FPGA_HID_ATN (1<<5) /* input 0/1 chip idle/ATN */
#define OMAP1510_FPGA_HID_rsrvd (1<<6)
#define OMAP1510_FPGA_HID_RESETn (1<<7) /* output - 0/1 USAR reset/run */
/* The FPGA IRQ is cascaded through GPIO_13 */
#define OMAP1510_INT_FPGA (IH_GPIO_BASE + 13)
/* IRQ Numbers for interrupts muxed through the FPGA */
#define OMAP1510_INT_FPGA_ATN (OMAP_FPGA_IRQ_BASE + 0)
#define OMAP1510_INT_FPGA_ACK (OMAP_FPGA_IRQ_BASE + 1)
#define OMAP1510_INT_FPGA2 (OMAP_FPGA_IRQ_BASE + 2)
#define OMAP1510_INT_FPGA3 (OMAP_FPGA_IRQ_BASE + 3)
#define OMAP1510_INT_FPGA4 (OMAP_FPGA_IRQ_BASE + 4)
#define OMAP1510_INT_FPGA5 (OMAP_FPGA_IRQ_BASE + 5)
#define OMAP1510_INT_FPGA6 (OMAP_FPGA_IRQ_BASE + 6)
#define OMAP1510_INT_FPGA7 (OMAP_FPGA_IRQ_BASE + 7)
#define OMAP1510_INT_FPGA8 (OMAP_FPGA_IRQ_BASE + 8)
#define OMAP1510_INT_FPGA9 (OMAP_FPGA_IRQ_BASE + 9)
#define OMAP1510_INT_FPGA10 (OMAP_FPGA_IRQ_BASE + 10)
#define OMAP1510_INT_FPGA11 (OMAP_FPGA_IRQ_BASE + 11)
#define OMAP1510_INT_FPGA12 (OMAP_FPGA_IRQ_BASE + 12)
#define OMAP1510_INT_ETHER (OMAP_FPGA_IRQ_BASE + 13)
#define OMAP1510_INT_FPGAUART1 (OMAP_FPGA_IRQ_BASE + 14)
#define OMAP1510_INT_FPGAUART2 (OMAP_FPGA_IRQ_BASE + 15)
#define OMAP1510_INT_FPGA_TS (OMAP_FPGA_IRQ_BASE + 16)
#define OMAP1510_INT_FPGA17 (OMAP_FPGA_IRQ_BASE + 17)
#define OMAP1510_INT_FPGA_CAM (OMAP_FPGA_IRQ_BASE + 18)
#define OMAP1510_INT_FPGA_RTC_A (OMAP_FPGA_IRQ_BASE + 19)
#define OMAP1510_INT_FPGA_RTC_B (OMAP_FPGA_IRQ_BASE + 20)
#define OMAP1510_INT_FPGA_CD (OMAP_FPGA_IRQ_BASE + 21)
#define OMAP1510_INT_FPGA22 (OMAP_FPGA_IRQ_BASE + 22)
#define OMAP1510_INT_FPGA23 (OMAP_FPGA_IRQ_BASE + 23)
#endif /* __ASM_ARCH_OMAP15XX_H */
arch/arm/mach-omap1/include/mach/serial.h 0 → 100644
View file @ b1f71bd0
/*
* Copyright (C) 2009 Texas Instruments
* Added OMAP4 support- Santosh Shilimkar <santosh.shilimkar@ti.com>
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __ASM_ARCH_SERIAL_H
#define __ASM_ARCH_SERIAL_H
#include <linux/init.h>
/*
* Memory entry used for the DEBUG_LL UART configuration, relative to
* start of RAM. See also uncompress.h and debug-macro.S.
*
* Note that using a memory location for storing the UART configuration
* has at least two limitations:
*
* 1. Kernel uncompress code cannot overlap OMAP_UART_INFO as the
* uncompress code could then partially overwrite itself
* 2. We assume printascii is called at least once before paging_init,
* and addruart has a chance to read OMAP_UART_INFO
*/
#define OMAP_UART_INFO_OFS 0x3ffc
/* OMAP1 serial ports */
#define OMAP1_UART1_BASE 0xfffb0000
#define OMAP1_UART2_BASE 0xfffb0800
#define OMAP1_UART3_BASE 0xfffb9800
#define OMAP_PORT_SHIFT 2
#define OMAP7XX_PORT_SHIFT 0
#define OMAP1510_BASE_BAUD (12000000/16)
#define OMAP16XX_BASE_BAUD (48000000/16)
/*
* DEBUG_LL port encoding stored into the UART1 scratchpad register by
* decomp_setup in uncompress.h
*/
#define OMAP1UART1 11
#define OMAP1UART2 12
#define OMAP1UART3 13
#ifndef __ASSEMBLER__
extern void omap_serial_init(void);
#endif
#endif
arch/arm/mach-omap1/include/mach/soc.h 0 → 100644
View file @ b1f71bd0
/*
* OMAP cpu type detection
*
* Copyright (C) 2004, 2008 Nokia Corporation
*
* Copyright (C) 2009-11 Texas Instruments.
*
* Written by Tony Lindgren <tony.lindgren@nokia.com>
*
* Added OMAP4/5 specific defines - Santosh Shilimkar<santosh.shilimkar@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef __ASM_ARCH_OMAP_CPU_H
#define __ASM_ARCH_OMAP_CPU_H
#ifndef __ASSEMBLY__
#include <linux/bitops.h>
/*
* Test if multicore OMAP support is needed
*/
#undef MULTI_OMAP1
#undef OMAP_NAME
#ifdef CONFIG_ARCH_OMAP730
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap730
# endif
#endif
#ifdef CONFIG_ARCH_OMAP850
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap850
# endif
#endif
#ifdef CONFIG_ARCH_OMAP15XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap1510
# endif
#endif
#ifdef CONFIG_ARCH_OMAP16XX
# ifdef OMAP_NAME
# undef MULTI_OMAP1
# define MULTI_OMAP1
# else
# define OMAP_NAME omap16xx
# endif
#endif
/*
* omap_rev bits:
* CPU id bits (0730, 1510, 1710, 2422...) [31:16]
* CPU revision (See _REV_ defined in cpu.h) [15:08]
* CPU class bits (15xx, 16xx, 24xx, 34xx...) [07:00]
*/
unsigned int omap_rev(void);
/*
* Get the CPU revision for OMAP devices
*/
#define GET_OMAP_REVISION() ((omap_rev() >> 8) & 0xff)
/*
* Macros to group OMAP into cpu classes.
* These can be used in most places.
* cpu_is_omap7xx(): True for OMAP730, OMAP850
* cpu_is_omap15xx(): True for OMAP1510, OMAP5910 and OMAP310
* cpu_is_omap16xx(): True for OMAP1610, OMAP5912 and OMAP1710
*/
#define GET_OMAP_CLASS (omap_rev() & 0xff)
#define IS_OMAP_CLASS(class, id) \
static inline int is_omap ##class (void) \
{ \
return (GET_OMAP_CLASS == (id)) ? 1 : 0; \
}
#define GET_OMAP_SUBCLASS ((omap_rev() >> 20) & 0x0fff)
#define IS_OMAP_SUBCLASS(subclass, id) \
static inline int is_omap ##subclass (void) \
{ \
return (GET_OMAP_SUBCLASS == (id)) ? 1 : 0; \
}
IS_OMAP_CLASS(7xx, 0x07)
IS_OMAP_CLASS(15xx, 0x15)
IS_OMAP_CLASS(16xx, 0x16)
#define cpu_is_omap7xx() 0
#define cpu_is_omap15xx() 0
#define cpu_is_omap16xx() 0
#if defined(MULTI_OMAP1)
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP850)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() is_omap7xx()
# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() is_omap15xx()
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() is_omap16xx()
# endif
#else
# if defined(CONFIG_ARCH_OMAP730)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP850)
# undef cpu_is_omap7xx
# define cpu_is_omap7xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap15xx
# define cpu_is_omap15xx() 1
# endif
# if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap16xx
# define cpu_is_omap16xx() 1
# endif
#endif
/*
* Macros to detect individual cpu types.
* These are only rarely needed.
* cpu_is_omap310(): True for OMAP310
* cpu_is_omap1510(): True for OMAP1510
* cpu_is_omap1610(): True for OMAP1610
* cpu_is_omap1611(): True for OMAP1611
* cpu_is_omap5912(): True for OMAP5912
* cpu_is_omap1621(): True for OMAP1621
* cpu_is_omap1710(): True for OMAP1710
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
#define IS_OMAP_TYPE(type, id) \
static inline int is_omap ##type (void) \
{ \
return (GET_OMAP_TYPE == (id)) ? 1 : 0; \
}
IS_OMAP_TYPE(310, 0x0310)
IS_OMAP_TYPE(1510, 0x1510)
IS_OMAP_TYPE(1610, 0x1610)
IS_OMAP_TYPE(1611, 0x1611)
IS_OMAP_TYPE(5912, 0x1611)
IS_OMAP_TYPE(1621, 0x1621)
IS_OMAP_TYPE(1710, 0x1710)
#define cpu_is_omap310() 0
#define cpu_is_omap1510() 0
#define cpu_is_omap1610() 0
#define cpu_is_omap5912() 0
#define cpu_is_omap1611() 0
#define cpu_is_omap1621() 0
#define cpu_is_omap1710() 0
/* These are needed to compile common code */
#ifdef CONFIG_ARCH_OMAP1
#define cpu_is_omap242x() 0
#define cpu_is_omap2430() 0
#define cpu_is_omap243x() 0
#define cpu_is_omap24xx() 0
#define cpu_is_omap34xx() 0
#define cpu_is_omap44xx() 0
#define soc_is_omap54xx() 0
#define soc_is_am33xx() 0
#define cpu_class_is_omap1() 1
#define cpu_class_is_omap2() 0
#endif
/*
* Whether we have MULTI_OMAP1 or not, we still need to distinguish
* between 310 vs. 1510 and 1611B/5912 vs. 1710.
*/
#if defined(CONFIG_ARCH_OMAP15XX)
# undef cpu_is_omap310
# undef cpu_is_omap1510
# define cpu_is_omap310() is_omap310()
# define cpu_is_omap1510() is_omap1510()
#endif
#if defined(CONFIG_ARCH_OMAP16XX)
# undef cpu_is_omap1610
# undef cpu_is_omap1611
# undef cpu_is_omap5912
# undef cpu_is_omap1621
# undef cpu_is_omap1710
# define cpu_is_omap1610() is_omap1610()
# define cpu_is_omap1611() is_omap1611()
# define cpu_is_omap5912() is_omap5912()
# define cpu_is_omap1621() is_omap1621()
# define cpu_is_omap1710() is_omap1710()
#endif
#endif /* __ASSEMBLY__ */
#endif
arch/arm/mach-omap1/include/mach/uncompress.h
View file @ b1f71bd0
/*
* arch/arm/mach-omap1/include/mach/uncompress.h
* arch/arm/plat-omap/include/mach/uncompress.h
*
* Serial port stubs for kernel decompress status messages
*
* Initially based on:
* linux-2.4.15-rmk1-dsplinux1.6/arch/arm/plat-omap/include/mach1510/uncompress.h
* Copyright (C) 2000 RidgeRun, Inc.
* Author: Greg Lonnon <glonnon@ridgerun.com>
*
* Rewritten by:
* Author: <source@mvista.com>
* 2004 (c) MontaVista Software, Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
#include <plat/uncompress.h>
#include <linux/types.h>
#include <linux/serial_reg.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include "serial.h"
#define MDR1_MODE_MASK 0x07
volatile u8 *uart_base;
int uart_shift;
/*
* Store the DEBUG_LL uart number into memory.
* See also debug-macro.S, and serial.c for related code.
*/
static void set_omap_uart_info(unsigned char port)
{
/*
* Get address of some.bss variable and round it down
* a la CONFIG_AUTO_ZRELADDR.
*/
u32 ram_start = (u32)&uart_shift & 0xf8000000;
u32 *uart_info = (u32 *)(ram_start + OMAP_UART_INFO_OFS);
*uart_info = port;
}
static void putc(int c)
{
if (!uart_base)
return;
/* Check for UART 16x mode */
if ((uart_base[UART_OMAP_MDR1 << uart_shift] & MDR1_MODE_MASK) != 0)
return;
while (!(uart_base[UART_LSR << uart_shift] & UART_LSR_THRE))
barrier();
uart_base[UART_TX << uart_shift] = c;
}
static inline void flush(void)
{
}
/*
* Macros to configure UART1 and debug UART
*/
#define _DEBUG_LL_ENTRY(mach, dbg_uart, dbg_shft, dbg_id) \
if (machine_is_##mach()) { \
uart_base = (volatile u8 *)(dbg_uart); \
uart_shift = (dbg_shft); \
port = (dbg_id); \
set_omap_uart_info(port); \
break; \
}
#define DEBUG_LL_OMAP7XX(p, mach) \
_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP7XX_PORT_SHIFT, \
OMAP1UART##p)
#define DEBUG_LL_OMAP1(p, mach) \
_DEBUG_LL_ENTRY(mach, OMAP1_UART##p##_BASE, OMAP_PORT_SHIFT, \
OMAP1UART##p)
static inline void arch_decomp_setup(void)
{
int port = 0;
/*
* Initialize the port based on the machine ID from the bootloader.
* Note that we're using macros here instead of switch statement
* as machine_is functions are optimized out for the boards that
* are not selected.
*/
do {
/* omap7xx/8xx based boards using UART1 with shift 0 */
DEBUG_LL_OMAP7XX(1, herald);
DEBUG_LL_OMAP7XX(1, omap_perseus2);
/* omap15xx/16xx based boards using UART1 */
DEBUG_LL_OMAP1(1, ams_delta);
DEBUG_LL_OMAP1(1, nokia770);
DEBUG_LL_OMAP1(1, omap_h2);
DEBUG_LL_OMAP1(1, omap_h3);
DEBUG_LL_OMAP1(1, omap_innovator);
DEBUG_LL_OMAP1(1, omap_osk);
DEBUG_LL_OMAP1(1, omap_palmte);
DEBUG_LL_OMAP1(1, omap_palmz71);
/* omap15xx/16xx based boards using UART2 */
DEBUG_LL_OMAP1(2, omap_palmtt);
/* omap15xx/16xx based boards using UART3 */
DEBUG_LL_OMAP1(3, sx1);
} while (0);
}
/*
* nothing to do
*/
#define arch_decomp_wdog()
arch/arm/mach-omap1/io.c
View file @ b1f71bd0
......@@ -17,8 +17,8 @@
#include <asm/mach/map.h>
#include <mach/mux.h>
#include <plat/tc.h>
#include <plat/dma.h>
#include <mach/tc.h>
#include <plat-omap/dma-omap.h>
#include "iomap.h"
#include "common.h"
......@@ -134,7 +134,6 @@ void __init omap1_init_early(void)
*/
omap1_clk_init();
omap1_mux_init();
omap_init_consistent_dma_size();
}
void __init omap1_init_late(void)
......
arch/arm/mach-omap1/iomap.h
View file @ b1f71bd0
......@@ -22,9 +22,6 @@
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define OMAP1_IO_OFFSET 0x01000000 /* Virtual IO = 0xfefb0000 */
#define OMAP1_IO_ADDRESS(pa) IOMEM((pa) - OMAP1_IO_OFFSET)
/*
* ----------------------------------------------------------------------------
* Omap1 specific IO mapping
......
arch/arm/mach-omap1/irq.c
View file @ b1f71bd0
......@@ -45,7 +45,7 @@
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include "soc.h"
#include <mach/hardware.h>
......
arch/arm/mach-omap1/lcd_dma.c
View file @ b1f71bd0
......@@ -27,11 +27,13 @@
#include <linux/interrupt.h>
#include <linux/io.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <mach/hardware.h>
#include <mach/lcdc.h>
#include "dma.h"
int omap_lcd_dma_running(void)
{
/*
......
arch/arm/mach-omap1/mcbsp.c
View file @ b1f71bd0
......@@ -19,14 +19,15 @@
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <mach/mux.h>
#include <plat/cpu.h>
#include "soc.h"
#include <linux/platform_data/asoc-ti-mcbsp.h>
#include <mach/irqs.h>
#include "iomap.h"
#include "dma.h"
#define DPS_RSTCT2_PER_EN (1 << 0)
#define DSP_RSTCT2_WD_PER_EN (1 << 1)
......
arch/arm/mach-omap1/mmc.h 0 → 100644
View file @ b1f71bd0
#include <linux/mmc/host.h>
#include <linux/platform_data/mmc-omap.h>
#define OMAP15XX_NR_MMC 1
#define OMAP16XX_NR_MMC 2
#define OMAP1_MMC_SIZE 0x080
#define OMAP1_MMC1_BASE 0xfffb7800
#define OMAP1_MMC2_BASE 0xfffb7c00 /* omap16xx only */
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
#else
static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
}
#endif
arch/arm/mach-omap1/opp_data.c
View file @ b1f71bd0
......@@ -10,7 +10,7 @@
* published by the Free Software Foundation.
*/
#include <plat/clkdev_omap.h>
#include "clock.h"
#include "opp.h"
/*-------------------------------------------------------------------------
......
arch/arm/mach-omap1/pm.c
View file @ b1f71bd0
......@@ -44,23 +44,23 @@
#include <linux/io.h>
#include <linux/atomic.h>
#include <asm/fncpy.h>
#include <asm/system_misc.h>
#include <asm/irq.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/tc.h>
#include <mach/tc.h>
#include <mach/mux.h>
#include <plat/dma.h>
#include <plat-omap/dma-omap.h>
#include <plat/dmtimer.h>
#include <mach/irqs.h>
#include "iomap.h"
#include "clock.h"
#include "pm.h"
#include "sram.h"
static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
......
arch/arm/mach-omap1/pm_bus.c
View file @ b1f71bd0
......@@ -19,8 +19,7 @@
#include <linux/clk.h>
#include <linux/err.h>
#include <plat/omap_device.h>
#include <plat/omap-pm.h>
#include "soc.h"
#ifdef CONFIG_PM_RUNTIME
static int omap1_pm_runtime_suspend(struct device *dev)
......
arch/arm/mach-omap1/serial.c
View file @ b1f71bd0
......@@ -23,7 +23,6 @@
#include <asm/mach-types.h>
#include <mach/mux.h>
#include <plat/fpga.h>
#include "pm.h"
......
arch/arm/mach-omap1/sleep.S
View file @ b1f71bd0
......@@ -36,6 +36,8 @@
#include <asm/assembler.h>
#include <mach/hardware.h>
#include "iomap.h"
#include "pm.h"
......
arch/arm/mach-omap1/soc.h 0 → 100644
View file @ b1f71bd0
/*
* We can move mach/soc.h here once the drivers are fixed
*/
#include <mach/soc.h>
arch/arm/mach-omap1/sram-init.c 0 → 100644
View file @ b1f71bd0
/*
* OMAP SRAM detection and management
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/fncpy.h>
#include <asm/tlb.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
#include "soc.h"
#include "sram.h"
#define OMAP1_SRAM_PA 0x20000000
#define SRAM_BOOTLOADER_SZ 0x80
/*
* The amount of SRAM depends on the core type.
* Note that we cannot try to test for SRAM here because writes
* to secure SRAM will hang the system. Also the SRAM is not
* yet mapped at this point.
*/
static void __init omap_detect_and_map_sram(void)
{
unsigned long omap_sram_skip = SRAM_BOOTLOADER_SZ;
unsigned long omap_sram_start = OMAP1_SRAM_PA;
unsigned long omap_sram_size;
if (cpu_is_omap7xx())
omap_sram_size = 0x32000; /* 200K */
else if (cpu_is_omap15xx())
omap_sram_size = 0x30000; /* 192K */
else if (cpu_is_omap1610() || cpu_is_omap1611() ||
cpu_is_omap1621() || cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else {
pr_err("Could not detect SRAM size\n");
omap_sram_size = 0x4000;
}
omap_map_sram(omap_sram_start, omap_sram_size,
omap_sram_skip, 1);
}
static void (*_omap_sram_reprogram_clock)(u32 dpllctl, u32 ckctl);
void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl)
{
BUG_ON(!_omap_sram_reprogram_clock);
/* On 730, bit 13 must always be 1 */
if (cpu_is_omap7xx())
ckctl |= 0x2000;
_omap_sram_reprogram_clock(dpllctl, ckctl);
}
int __init omap_sram_init(void)
{
omap_detect_and_map_sram();
_omap_sram_reprogram_clock =
omap_sram_push(omap1_sram_reprogram_clock,
omap1_sram_reprogram_clock_sz);
return 0;
}
arch/arm/mach-omap1/sram.h 0 → 100644
View file @ b1f71bd0
#include <plat/sram.h>
extern void omap_sram_reprogram_clock(u32 dpllctl, u32 ckctl);
/* Do not use these */
extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
extern unsigned long omap1_sram_reprogram_clock_sz;
arch/arm/mach-omap1/timer32k.c
View file @ b1f71bd0
......@@ -50,6 +50,7 @@
#include <asm/mach/irq.h>
#include <asm/mach/time.h>
#include <plat/counter-32k.h>
#include <plat/dmtimer.h>
#include <mach/hardware.h>
......
arch/arm/mach-omap1/usb.c
View file @ b1f71bd0
......@@ -301,7 +301,7 @@ static inline void otg_device_init(struct omap_usb_config *pdata)
#endif
u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
static u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
{
u32 syscon1 = 0;
......@@ -409,7 +409,7 @@ u32 __init omap1_usb0_init(unsigned nwires, unsigned is_device)
return syscon1 << 16;
}
u32 __init omap1_usb1_init(unsigned nwires)
static u32 __init omap1_usb1_init(unsigned nwires)
{
u32 syscon1 = 0;
......@@ -475,7 +475,7 @@ u32 __init omap1_usb1_init(unsigned nwires)
return syscon1 << 20;
}
u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
static u32 __init omap1_usb2_init(unsigned nwires, unsigned alt_pingroup)
{
u32 syscon1 = 0;
......
arch/arm/mach-omap2/Makefile
View file @ b1f71bd0
......@@ -4,7 +4,8 @@
# Common support
obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o sram.o
# INTCPS IP block support - XXX should be moved to drivers/
obj-$(CONFIG_ARCH_OMAP2) += irq.o
......@@ -69,6 +70,7 @@ obj-$(CONFIG_ARCH_OMAP4) += pm44xx.o omap-mpuss-lowpower.o
obj-$(CONFIG_ARCH_OMAP4) += sleep44xx.o
obj-$(CONFIG_SOC_OMAP5) += omap-mpuss-lowpower.o sleep44xx.o
obj-$(CONFIG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_OMAP_PM_NOOP) += omap-pm-noop.o
obj-$(CONFIG_POWER_AVS_OMAP) += sr_device.o
obj-$(CONFIG_POWER_AVS_OMAP_CLASS3) += smartreflex-class3.o
......
arch/arm/mach-omap2/am35xx-emac.c
View file @ b1f71bd0
......@@ -18,7 +18,7 @@
#include <linux/err.h>
#include <linux/davinci_emac.h>
#include <asm/system.h>
#include <plat/omap_device.h>
#include "omap_device.h"
#include "am35xx.h"
#include "control.h"
#include "am35xx-emac.h"
......
arch/arm/mach-omap2/board-2430sdp.c
View file @ b1f71bd0
......@@ -28,14 +28,12 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include "gpmc.h"
#include "gpmc-smc91x.h"
#include <video/omapdss.h>
......
arch/arm/mach-omap2/board-3430sdp.c
View file @ b1f71bd0
......@@ -30,15 +30,15 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/usb.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat-omap/dma-omap.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include "gpmc.h"
#include "gpmc-smc91x.h"
#include "soc.h"
#include "board-flash.h"
#include "mux.h"
#include "sdram-qimonda-hyb18m512160af-6.h"
......
arch/arm/mach-omap2/board-3630sdp.c
View file @ b1f71bd0
......@@ -18,9 +18,8 @@
#include "common.h"
#include "gpmc-smc91x.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
......
arch/arm/mach-omap2/board-4430sdp.c
View file @ b1f71bd0
......@@ -27,6 +27,7 @@
#include <linux/leds.h>
#include <linux/leds_pwm.h>
#include <linux/platform_data/omap4-keypad.h>
#include <linux/usb/musb.h>
#include <asm/hardware/gic.h>
#include <asm/mach-types.h>
......@@ -34,8 +35,6 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include "omap4-keypad.h"
#include <video/omapdss.h>
#include <video/omap-panel-nokia-dsi.h>
......@@ -45,6 +44,7 @@
#include "soc.h"
#include "mux.h"
#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
......
arch/arm/mach-omap2/board-am3517crane.c
View file @ b1f71bd0
......@@ -26,7 +26,6 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
#include "am35xx-emac.h"
#include "mux.h"
......
arch/arm/mach-omap2/board-am3517evm.c
View file @ b1f71bd0
......@@ -25,6 +25,7 @@
#include <linux/can/platform/ti_hecc.h>
#include <linux/davinci_emac.h>
#include <linux/mmc/host.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/gpio-omap.h>
#include "am35xx.h"
......@@ -33,7 +34,6 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
......
arch/arm/mach-omap2/board-apollon.c
View file @ b1f71bd0
......@@ -28,14 +28,14 @@
#include <linux/clk.h>
#include <linux/smc91x.h>
#include <linux/gpio.h>
#include <linux/platform_data/leds-omap.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <plat/led.h>
#include "common.h"
#include <plat/gpmc.h>
#include "gpmc.h"
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
......
arch/arm/mach-omap2/board-cm-t35.c
View file @ b1f71bd0
......@@ -38,21 +38,19 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <mach/hardware.h>
#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
#include "gpmc.h"
#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
......@@ -181,7 +179,7 @@ static struct omap_nand_platform_data cm_t35_nand_data = {
static void __init cm_t35_init_nand(void)
{
if (gpmc_nand_init(&cm_t35_nand_data) < 0)
if (gpmc_nand_init(&cm_t35_nand_data, NULL) < 0)
pr_err("CM-T35: Unable to register NAND device\n");
}
#else
......
arch/arm/mach-omap2/board-cm-t3517.c
View file @ b1f71bd0
......@@ -39,9 +39,8 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/gpmc.h>
#include "gpmc.h"
#include "am35xx.h"
......@@ -49,6 +48,7 @@
#include "control.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
#include "gpmc-nand.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
......@@ -240,7 +240,7 @@ static struct omap_nand_platform_data cm_t3517_nand_data = {
static void __init cm_t3517_init_nand(void)
{
if (gpmc_nand_init(&cm_t3517_nand_data) < 0)
if (gpmc_nand_init(&cm_t3517_nand_data, NULL) < 0)
pr_err("CM-T3517: NAND initialization failed\n");
}
#else
......
arch/arm/mach-omap2/board-devkit8000.c
View file @ b1f71bd0
......@@ -39,9 +39,8 @@
#include <asm/mach/flash.h>
#include "common.h"
#include <plat/gpmc.h>
#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
......@@ -55,8 +54,11 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "mux.h"
#include "hsmmc.h"
#include "board-flash.h"
#include "common-board-devices.h"
#define NAND_CS 0
#define OMAP_DM9000_GPIO_IRQ 25
#define OMAP3_DEVKIT_TS_GPIO 27
......@@ -621,8 +623,9 @@ static void __init devkit8000_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,
ARRAY_SIZE(devkit8000_nand_partitions));
board_nand_init(devkit8000_nand_partitions,
ARRAY_SIZE(devkit8000_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure SDRC pins are mux'd for self-refresh */
......
arch/arm/mach-omap2/board-flash.c
View file @ b1f71bd0
......@@ -17,14 +17,14 @@
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include <plat/cpu.h>
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <plat/tc.h>
#include "soc.h"
#include "common.h"
#include "board-flash.h"
#include "gpmc-onenand.h"
#include "gpmc-nand.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
......@@ -104,36 +104,35 @@ __init board_onenand_init(struct mtd_partition *onenand_parts,
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
/* Note that all values in this struct are in nanoseconds */
static struct gpmc_timings nand_timings = {
struct gpmc_timings nand_default_timings[1] = {
{
.sync_clk = 0,
.sync_clk = 0,
.cs_on = 0,
.cs_rd_off = 36,
.cs_wr_off = 36,
.cs_on = 0,
.cs_rd_off = 36,
.cs_wr_off = 36,
.adv_on = 6,
.adv_rd_off = 24,
.adv_wr_off = 36,
.adv_on = 6,
.adv_rd_off = 24,
.adv_wr_off = 36,
.we_off = 30,
.oe_off = 48,
.we_off = 30,
.oe_off = 48,
.access = 54,
.rd_cycle = 72,
.wr_cycle = 72,
.access = 54,
.rd_cycle = 72,
.wr_cycle = 72,
.wr_access = 30,
.wr_data_mux_bus = 0,
.wr_access = 30,
.wr_data_mux_bus = 0,
},
};
static struct omap_nand_platform_data board_nand_data = {
.gpmc_t = &nand_timings,
};
static struct omap_nand_platform_data board_nand_data;
void
__init board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type)
__init board_nand_init(struct mtd_partition *nand_parts, u8 nr_parts, u8 cs,
int nand_type, struct gpmc_timings *gpmc_t)
{
board_nand_data.cs = cs;
board_nand_data.parts = nand_parts;
......@@ -141,7 +140,7 @@ __init board_nand_init(struct mtd_partition *nand_parts,
board_nand_data.devsize = nand_type;
board_nand_data.ecc_opt = OMAP_ECC_HAMMING_CODE_DEFAULT;
gpmc_nand_init(&board_nand_data);
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
......@@ -238,5 +237,6 @@ void __init board_flash_init(struct flash_partitions partition_info[],
pr_err("NAND: Unable to find configuration in GPMC\n");
else
board_nand_init(partition_info[2].parts,
partition_info[2].nr_parts, nandcs, nand_type);
partition_info[2].nr_parts, nandcs,
nand_type, nand_default_timings);
}
arch/arm/mach-omap2/board-flash.h
View file @ b1f71bd0
......@@ -12,7 +12,7 @@
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <plat/gpmc.h>
#include "gpmc.h"
#define PDC_NOR 1
#define PDC_NAND 2
......@@ -40,12 +40,14 @@ static inline void board_flash_init(struct flash_partitions part[],
#if defined(CONFIG_MTD_NAND_OMAP2) || \
defined(CONFIG_MTD_NAND_OMAP2_MODULE)
extern void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type);
u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t);
extern struct gpmc_timings nand_default_timings[];
#else
static inline void board_nand_init(struct mtd_partition *nand_parts,
u8 nr_parts, u8 cs, int nand_type)
u8 nr_parts, u8 cs, int nand_type, struct gpmc_timings *gpmc_t)
{
}
#define nand_default_timings NULL
#endif
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
......
arch/arm/mach-omap2/board-h4.c
View file @ b1f71bd0
......@@ -26,15 +26,14 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <linux/mfd/menelaus.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/menelaus.h>
#include <plat/dma.h>
#include <plat/gpmc.h>
#include "debug-devices.h"
#include <plat-omap/dma-omap.h>
#include <plat/debug-devices.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
......@@ -42,6 +41,7 @@
#include "common.h"
#include "mux.h"
#include "control.h"
#include "gpmc.h"
#define H4_FLASH_CS 0
#define H4_SMC91X_CS 1
......
arch/arm/mach-omap2/board-igep0020.c
View file @ b1f71bd0
......@@ -29,20 +29,19 @@
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include "common.h"
#include "gpmc.h"
#include "mux.h"
#include "hsmmc.h"
#include "sdram-numonyx-m65kxxxxam.h"
#include "common-board-devices.h"
#include "board-flash.h"
#include "control.h"
#include "gpmc-onenand.h"
#define IGEP2_SMSC911X_CS 5
#define IGEP2_SMSC911X_GPIO 176
......@@ -175,7 +174,7 @@ static void __init igep_flash_init(void)
pr_info("IGEP: initializing NAND memory device\n");
board_nand_init(igep_flash_partitions,
ARRAY_SIZE(igep_flash_partitions),
0, NAND_BUSWIDTH_16);
0, NAND_BUSWIDTH_16, nand_default_timings);
} else if (mux == IGEP_SYSBOOT_ONENAND) {
pr_info("IGEP: initializing OneNAND memory device\n");
board_onenand_init(igep_flash_partitions,
......
arch/arm/mach-omap2/board-ldp.c
View file @ b1f71bd0
......@@ -35,9 +35,8 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/gpmc.h>
#include <mach/board-zoom.h>
#include <plat/usb.h>
#include "board-zoom.h"
#include "gpmc.h"
#include "gpmc-smsc911x.h"
#include <video/omapdss.h>
......@@ -420,8 +419,8 @@ static void __init omap_ldp_init(void)
omap_serial_init();
omap_sdrc_init(NULL, NULL);
usb_musb_init(NULL);
board_nand_init(ldp_nand_partitions,
ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0);
board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions),
ZOOM_NAND_CS, 0, nand_default_timings);
omap_hsmmc_init(mmc);
ldp_display_init();
......
arch/arm/mach-omap2/board-n8x0.c
View file @ b1f71bd0
......@@ -22,16 +22,17 @@
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include "common.h"
#include <plat/menelaus.h>
#include <plat/mmc.h>
#include "mmc.h"
#include "mux.h"
#include "gpmc-onenand.h"
#define TUSB6010_ASYNC_CS 1
#define TUSB6010_SYNC_CS 4
......
arch/arm/mach-omap2/board-omap3beagle.c
View file @ b1f71bd0
......@@ -39,19 +39,22 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
#include "common.h"
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <plat/omap_device.h>
#include "common.h"
#include "omap_device.h"
#include "gpmc.h"
#include "soc.h"
#include "mux.h"
#include "hsmmc.h"
#include "pm.h"
#include "board-flash.h"
#include "common-board-devices.h"
#define NAND_CS 0
/*
* OMAP3 Beagle revision
* Run time detection of Beagle revision is done by reading GPIO.
......@@ -518,8 +521,9 @@ static void __init omap3_beagle_init(void)
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions));
board_nand_init(omap3beagle_nand_partitions,
ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
omap_twl4030_audio_init("omap3beagle");
/* Ensure msecure is mux'd to be able to set the RTC. */
......
arch/arm/mach-omap2/board-omap3evm.c
View file @ b1f71bd0
......@@ -32,6 +32,7 @@
#include <linux/spi/ads7846.h>
#include <linux/i2c/twl.h>
#include <linux/usb/otg.h>
#include <linux/usb/musb.h>
#include <linux/usb/nop-usb-xceiv.h>
#include <linux/smsc911x.h>
......@@ -45,17 +46,20 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <plat/usb.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include "common.h"
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <video/omap-panel-tfp410.h>
#include "soc.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
#include "board-flash.h"
#define NAND_CS 0
#define OMAP3_EVM_TS_GPIO 175
#define OMAP3_EVM_EHCI_VBUS 22
......@@ -731,8 +735,9 @@ static void __init omap3_evm_init(void)
}
usb_musb_init(&musb_board_data);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions));
board_nand_init(omap3evm_nand_partitions,
ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL);
omap3evm_init_smsc911x();
......
arch/arm/mach-omap2/board-omap3logic.c
View file @ b1f71bd0
......@@ -34,16 +34,13 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "gpmc-smsc911x.h"
#include <plat/gpmc.h>
#include <plat/sdrc.h>
#include <plat/usb.h>
#include "common.h"
#include "mux.h"
#include "hsmmc.h"
#include "control.h"
#include "common-board-devices.h"
#include "gpmc.h"
#include "gpmc-smsc911x.h"
#define OMAP3LOGIC_SMSC911X_CS 1
......
arch/arm/mach-omap2/board-omap3pandora.c
View file @ b1f71bd0
......@@ -42,7 +42,6 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
#include <video/omapdss.h>
#include <linux/platform_data/mtd-nand-omap2.h>
......@@ -50,6 +49,7 @@
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
#include "gpmc-nand.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
......@@ -602,7 +602,7 @@ static void __init omap3pandora_init(void)
omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);
usbhs_init(&usbhs_bdata);
usb_musb_init(NULL);
gpmc_nand_init(&pandora_nand_data);
gpmc_nand_init(&pandora_nand_data, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
......
arch/arm/mach-omap2/board-omap3stalker.c
View file @ b1f71bd0
......@@ -40,9 +40,8 @@
#include <asm/mach/flash.h>
#include "common.h"
#include <plat/gpmc.h>
#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
......
arch/arm/mach-omap2/board-omap3touchbook.c
View file @ b1f71bd0
......@@ -44,12 +44,12 @@
#include <asm/system_info.h>
#include "common.h"
#include <plat/gpmc.h>
#include "gpmc.h"
#include <linux/platform_data/mtd-nand-omap2.h>
#include <plat/usb.h>
#include "mux.h"
#include "hsmmc.h"
#include "board-flash.h"
#include "common-board-devices.h"
#include <asm/setup.h>
......@@ -59,6 +59,8 @@
#define TB_BL_PWM_TIMER 9
#define TB_KILL_POWER_GPIO 168
#define NAND_CS 0
static unsigned long touchbook_revision;
static struct mtd_partition omap3touchbook_nand_partitions[] = {
......@@ -365,8 +367,9 @@ static void __init omap3_touchbook_init(void)
omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions));
board_nand_init(omap3touchbook_nand_partitions,
ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS,
NAND_BUSWIDTH_16, NULL);
/* Ensure SDRC pins are mux'd for self-refresh */
omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
......
arch/arm/mach-omap2/board-omap4panda.c
View file @ b1f71bd0
......@@ -29,6 +29,7 @@
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/ti_wilink_st.h>
#include <linux/usb/musb.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/omap-abe-twl6040.h>
......@@ -38,12 +39,11 @@
#include <asm/mach/map.h>
#include <video/omapdss.h>
#include "common.h"
#include <plat/usb.h>
#include <plat/mmc.h>
#include <video/omap-panel-tfp410.h>
#include "common.h"
#include "soc.h"
#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#include "mux.h"
......
arch/arm/mach-omap2/board-overo.c
View file @ b1f71bd0
......@@ -49,14 +49,17 @@
#include <video/omapdss.h>
#include <video/omap-panel-generic-dpi.h>
#include <video/omap-panel-tfp410.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include "common.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "gpmc.h"
#include "hsmmc.h"
#include "board-flash.h"
#include "common-board-devices.h"
#define NAND_CS 0
#define OVERO_GPIO_BT_XGATE 15
#define OVERO_GPIO_W2W_NRESET 16
#define OVERO_GPIO_PENDOWN 114
......@@ -495,8 +498,8 @@ static void __init overo_init(void)
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
omap_nand_flash_init(0, overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions));
board_nand_init(overo_nand_partitions,
ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL);
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
overo_spi_init();
......
arch/arm/mach-omap2/board-rm680.c
View file @ b1f71bd0
......@@ -22,17 +22,14 @@
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/i2c.h>
#include <plat/mmc.h>
#include <plat/usb.h>
#include <plat/gpmc.h>
#include "common.h"
#include <plat/serial.h>
#include "mux.h"
#include "gpmc.h"
#include "mmc.h"
#include "hsmmc.h"
#include "sdram-nokia.h"
#include "common-board-devices.h"
#include "gpmc-onenand.h"
static struct regulator_consumer_supply rm680_vemmc_consumers[] = {
REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
......
arch/arm/mach-omap2/board-rx51-peripherals.c
View file @ b1f71bd0
......@@ -31,9 +31,7 @@
#include <asm/system_info.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/omap-pm.h>
#include <plat-omap/dma-omap.h>
#include "gpmc-smc91x.h"
#include "board-rx51.h"
......@@ -52,8 +50,11 @@
#endif
#include "mux.h"
#include "omap-pm.h"
#include "hsmmc.h"
#include "common-board-devices.h"
#include "gpmc.h"
#include "gpmc-onenand.h"
#define SYSTEM_REV_B_USES_VAUX3 0x1699
#define SYSTEM_REV_S_USES_VAUX3 0x8
......
arch/arm/mach-omap2/board-rx51.c
View file @ b1f71bd0
......@@ -17,18 +17,18 @@
#include <linux/io.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/usb/musb.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include <plat/dma.h>
#include <plat/gpmc.h>
#include <plat/usb.h>
#include <plat-omap/dma-omap.h>
#include "common.h"
#include "mux.h"
#include "gpmc.h"
#include "pm.h"
#include "sdram-nokia.h"
......
arch/arm/mach-omap2/board-ti8168evm.c
View file @ b1f71bd0
......@@ -14,13 +14,14 @@
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/usb/musb.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
static struct omap_musb_board_data musb_board_data = {
.set_phy_power = ti81xx_musb_phy_power,
......
arch/arm/mach-omap2/board-zoom-debugboard.c
View file @ b1f71bd0
......@@ -17,10 +17,10 @@
#include <linux/regulator/fixed.h>
#include <linux/regulator/machine.h>
#include <plat/gpmc.h>
#include "gpmc.h"
#include "gpmc-smsc911x.h"
#include <mach/board-zoom.h>
#include "board-zoom.h"
#include "soc.h"
#include "common.h"
......
arch/arm/mach-omap2/board-zoom-display.c
View file @ b1f71bd0
......@@ -16,8 +16,9 @@
#include <linux/spi/spi.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <video/omapdss.h>
#include <mach/board-zoom.h>
#include "board-zoom.h"
#include "soc.h"
#include "common.h"
#define LCD_PANEL_RESET_GPIO_PROD 96
......
arch/arm/mach-omap2/board-zoom-peripherals.c
View file @ b1f71bd0
......@@ -26,9 +26,8 @@
#include <asm/mach/map.h>
#include "common.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include "board-zoom.h"
#include "mux.h"
#include "hsmmc.h"
......
arch/arm/mach-omap2/board-zoom.c
View file @ b1f71bd0
......@@ -22,9 +22,8 @@
#include <asm/mach/arch.h>
#include "common.h"
#include <plat/usb.h>
#include <mach/board-zoom.h>
#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
......@@ -113,8 +112,9 @@ static void __init omap_zoom_init(void)
usbhs_init(&usbhs_bdata);
}
board_nand_init(zoom_nand_partitions, ARRAY_SIZE(zoom_nand_partitions),
ZOOM_NAND_CS, NAND_BUSWIDTH_16);
board_nand_init(zoom_nand_partitions,
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
......
arch/arm/mach-omap2/clkt2xxx_apll.c
View file @ b1f71bd0
......@@ -21,7 +21,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include <plat/prcm.h>
#include "clock.h"
......
arch/arm/mach-omap2/clkt2xxx_dpll.c
View file @ b1f71bd0
......@@ -14,8 +14,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include "clock.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
......
arch/arm/mach-omap2/clkt2xxx_dpllcore.c
View file @ b1f71bd0
......@@ -25,15 +25,13 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include <plat/sram.h>
#include <plat/sdrc.h>
#include "clock.h"
#include "clock2xxx.h"
#include "opp2xxx.h"
#include "cm2xxx_3xxx.h"
#include "cm-regbits-24xx.h"
#include "sdrc.h"
#include "sram.h"
/* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */
......
arch/arm/mach-omap2/clkt2xxx_osc.c
View file @ b1f71bd0
......@@ -23,8 +23,6 @@
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include "clock.h"
#include "clock2xxx.h"
#include "prm2xxx_3xxx.h"
......
arch/arm/mach-omap2/clkt2xxx_sys.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clkt34xx_dpll3m2.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clkt_clksel.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clkt_dpll.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clkt_iclk.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock2420_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock2430.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock2430_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock2xxx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock33xx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock34xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock3517.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock36xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock3xxx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock3xxx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clock44xx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clockdomain.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clockdomain.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clockdomain2xxx_3xxx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clockdomains2420_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clockdomains2430_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/clockdomains3xxx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/cm33xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/common-board-devices.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/common-board-devices.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/common.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/common.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/control.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/devices.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/display.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/dma.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/dma.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/dpll3xxx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/dpll44xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/drm.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/dsp.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpio.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc-nand.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc-nand.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc-onenand.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc-onenand.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc-smc91x.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc-smsc911x.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/gpmc.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/hdq1w.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/hdq1w.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/hsmmc.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/hwspinlock.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/i2c.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/i2c.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/include/mach/gpio.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/mach-omap2/io.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/mcbsp.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/mmc.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/msdi.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/mux.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap-mpuss-lowpower.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap-secure.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap-secure.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap4-common.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_2420_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_2430_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_33xx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_hwmod_44xx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_opp_data.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_phy_internal.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/omap_twl.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/opp.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/opp3xxx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/pm-debug.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/pm.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/pm24xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/pm34xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/pm44xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/pmu.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/powerdomain.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/powerdomains2xxx_data.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/prcm.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/prm33xx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/prm_common.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sdram-nokia.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sdrc.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sdrc.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sdrc2xxx.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/serial.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/serial.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sleep34xx.S
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/soc.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sr_device.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sram.c 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/sram.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/timer.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/twl-common.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/usb-host.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/usb-musb.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/usb-tusb6010.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/wd_timer.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/mach-omap2/wd_timer.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/Makefile
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/clock.c deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/common.c deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/counter_32k.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/debug-devices.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/debug-leds.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/dma.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/dmtimer.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/fb.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/i2c.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/include/plat/clkdev_omap.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/clock.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/common.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/counter-32k.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/include/plat/cpu.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/include/plat/dma-44xx.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/dmtimer.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/include/plat/fpga.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/i2c.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/include/plat/multi.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/omap-secure.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/sdrc.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/include/plat/sram.h
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/include/plat/uncompress.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
arch/arm/plat-omap/sram.c
View file @ b1f71bd0
This diff is collapsed.
arch/arm/plat-omap/sram.h deleted 100644 → 0
View file @ 591d07bf
This diff is collapsed.
drivers/bluetooth/hci_ldisc.c
View file @ b1f71bd0
This diff is collapsed.
drivers/char/hw_random/omap-rng.c
View file @ b1f71bd0
This diff is collapsed.
drivers/crypto/omap-aes.c
View file @ b1f71bd0
This diff is collapsed.
drivers/crypto/omap-sham.c
View file @ b1f71bd0
This diff is collapsed.
drivers/dma/omap-dma.c
View file @ b1f71bd0
This diff is collapsed.
drivers/media/platform/omap/omap_vout.c
View file @ b1f71bd0
This diff is collapsed.
drivers/media/platform/omap/omap_voutdef.h
View file @ b1f71bd0
This diff is collapsed.
drivers/media/platform/omap3isp/isphist.c
View file @ b1f71bd0
This diff is collapsed.
drivers/media/platform/omap3isp/ispstat.h
View file @ b1f71bd0
This diff is collapsed.
drivers/media/platform/omap3isp/ispvideo.c
View file @ b1f71bd0
This diff is collapsed.
drivers/media/rc/ir-rx51.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mfd/menelaus.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mfd/omap-usb-host.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mfd/omap-usb-tll.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mfd/omap-usb.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
drivers/mmc/host/omap.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mmc/host/omap_hsmmc.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mtd/nand/omap2.c
View file @ b1f71bd0
This diff is collapsed.
drivers/mtd/onenand/omap2.c
View file @ b1f71bd0
This diff is collapsed.
drivers/pcmcia/omap_cf.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/n_tty.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/pty.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/serial/8250/8250.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/serial/8250/8250.h
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/serial/8250/8250_early.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/serial/samsung.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/tty_audit.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/tty_buffer.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/tty_io.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/tty_ldisc.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/tty_port.c
View file @ b1f71bd0
This diff is collapsed.
drivers/tty/vt/selection.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/gadget/omap_udc.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/host/ehci-omap.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/host/ohci-omap.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/host/ohci-omap3.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/musb/am35x.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/musb/musb_dsps.c
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/musb/omap2430.h
View file @ b1f71bd0
This diff is collapsed.
drivers/usb/musb/tusb6010_omap.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap/lcd_inn1510.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap/lcdc.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap/omapfb_main.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap/sossi.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/dss/core.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/dss/dispc.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/dss/dss.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/dss/dss_features.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/dss/dss_features.h
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/dss/hdmi.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/omapfb/omapfb-ioctl.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/omapfb/omapfb-main.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/omapfb/omapfb-sysfs.c
View file @ b1f71bd0
This diff is collapsed.
drivers/video/omap2/vrfb.c
View file @ b1f71bd0
This diff is collapsed.
fs/devpts/inode.c
View file @ b1f71bd0
This diff is collapsed.
include/linux/devpts_fs.h
View file @ b1f71bd0
This diff is collapsed.
include/linux/platform_data/gpio-omap.h
View file @ b1f71bd0
This diff is collapsed.
include/linux/platform_data/usb-omap.h 0 → 100644
View file @ b1f71bd0
This diff is collapsed.
include/linux/tty.h
View file @ b1f71bd0
This diff is collapsed.
include/linux/tty_flip.h
View file @ b1f71bd0
This diff is collapsed.
include/video/omapdss.h
View file @ b1f71bd0
This diff is collapsed.
kernel/printk.c
View file @ b1f71bd0
This diff is collapsed.
sound/soc/omap/am3517evm.c
View file @ b1f71bd0
This diff is collapsed.
sound/soc/omap/n810.c
View file @ b1f71bd0
This diff is collapsed.
sound/soc/omap/omap-pcm.c
View file @ b1f71bd0
This diff is collapsed.
sound/soc/omap/osk5912.c
View file @ b1f71bd0
This diff is collapsed.
sound/soc/omap/sdp3430.c
View file @ b1f71bd0
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7