drm: panel: add Khadas TS050 panel driver

This add support for the Khadas TS050 1080x1920 5" LCD DSI panel designed to work
with the Khadas Edge-V, Captain, VIM3 and VIM3L Single Board Computers.
It provides a MIPI DSI interface to the host, a built-in LED backlight
and touch controller.

The init values was taken from the vendor source tree, comments were added to the
know values but most of the init table is undocumented.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
[narmstrong: call drm_panel_remove if mipi_dsi_attach fails]
Link: https://patchwork.freedesktop.org/patch/msgid/20201204081949.38418-3-narmstrong@baylibre.com

drivers/gpu/drm/panel/Kconfig

@@ -145,6 +145,17 @@ config DRM_PANEL_JDI_LT070ME05000
 	  The panel has a 1200(RGB)×1920 (WUXGA) resolution and uses
 	  24 bit per pixel.
 
+config DRM_PANEL_KHADAS_TS050
+	tristate "Khadas TS050 panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for Khadas TS050 TFT-LCD
+	  panel module. The panel has a 1080x1920 resolution and uses
+	  24 bit RGB per pixel. It provides a MIPI DSI interface to
+	  the host, a built-in LED backlight and touch controller.
+
 config DRM_PANEL_KINGDISPLAY_KD097D04
 	tristate "Kingdisplay kd097d04 panel"
 	depends on OF

drivers/gpu/drm/panel/Makefile

@@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
+obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
 obj-$(CONFIG_DRM_PANEL_KINGDISPLAY_KD097D04) += panel-kingdisplay-kd097d04.o
 obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK050H3146W) += panel-leadtek-ltk050h3146w.o
 obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o