Commit b24bd7e9 authored by Magnus Damm's avatar Magnus Damm Committed by Simon Horman

ARM: shmobile: Remove AP4EVB board support

Remove board support for the sh7372 based AP4EVB board

The sh7372 SoC support code is still kept around since it
is in use by the Mackerel board which is basically a more
recent board where the design is based on AP4EVB.
Signed-off-by: default avatarMagnus Damm <damm@opensource.se>
Signed-off-by: default avatarSimon Horman <horms+renesas@verge.net.au>
parent 21ba05a6
CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=16
CONFIG_BLK_DEV_INITRD=y
CONFIG_SLAB=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SHMOBILE=y
CONFIG_ARCH_SH7372=y
CONFIG_MACH_AP4EVB=y
CONFIG_AEABI=y
# CONFIG_OABI_COMPAT is not set
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=sh-sci.0,115200"
CONFIG_KEXEC=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_MTD=y
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_NAND=y
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
CONFIG_SERIAL_SH_SCI=y
CONFIG_SERIAL_SH_SCI_NR_UARTS=8
CONFIG_SERIAL_SH_SCI_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
CONFIG_TMPFS=y
# CONFIG_MISC_FILESYSTEMS is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FTRACE is not set
# CONFIG_CRC32 is not set
......@@ -69,27 +69,6 @@ config ARCH_EMEV2
comment "SH-Mobile Board Type"
config MACH_AP4EVB
bool "AP4EVB board"
depends on ARCH_SH7372
select ARCH_REQUIRE_GPIOLIB
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select SH_LCD_MIPI_DSI
select SND_SOC_AK4642 if SND_SIMPLE_CARD
choice
prompt "AP4EVB LCD panel selection"
default AP4EVB_QHD
depends on MACH_AP4EVB
config AP4EVB_QHD
bool "MIPI-DSI QHD (960x540)"
config AP4EVB_WVGA
bool "Parallel WVGA (800x480)"
endchoice
config MACH_AG5EVM
bool "AG5EVM board"
depends on ARCH_SH73A0
......
......@@ -35,7 +35,6 @@ obj-$(CONFIG_ARCH_R8A7779) += pm-r8a7779.o
obj-$(CONFIG_ARCH_SH73A0) += pm-sh73a0.o
# Board objects
obj-$(CONFIG_MACH_AP4EVB) += board-ap4evb.o
obj-$(CONFIG_MACH_AG5EVM) += board-ag5evm.o
obj-$(CONFIG_MACH_APE6EVM) += board-ape6evm.o
obj-$(CONFIG_MACH_MACKEREL) += board-mackerel.o
......
# per-board load address for uImage
loadaddr-y :=
loadaddr-$(CONFIG_MACH_AG5EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_AP4EVB) += 0x40008000
loadaddr-$(CONFIG_MACH_APE6EVM) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA_REFERENCE) += 0x40008000
......
This diff is collapsed.
LIST "partner-jet-setup.txt"
LIST "(C) Copyright 2010 Renesas Solutions Corp"
LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
LIST "RWT Setting"
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
LIST "FRQCR"
ED 0xE6150000, 0x2D1305C3
ED 0xE61500E0, 0x9E40358E
ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
ED 0xE61500E4, 0x00002000
WAIT 1, 0xFE40009C
LIST "PLL"
ED 0xE6150028, 0x00004000
WAIT 1, 0xFE40009C
ED 0xE615002C, 0x93000040
WAIT 1, 0xFE40009C
LIST "SUB/USBClk"
ED 0xE6150080, 0x00000180
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
LIST "SBSC1"
ED 0xFE400354, 0x01AD8000
ED 0xFE400354, 0x01AD8001
WAIT 5, 0xFE40009C
ED 0xFE400008, 0xBCC90151
ED 0xFE400040, 0x41774113
ED 0xFE400044, 0x2712E229
ED 0xFE400048, 0x20C18505
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
WAIT 30, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
WAIT 5, 0xFE40009C
ED 0xFE400084, 0x0000FF0A
EB 0xFE500000, 0x00
WAIT 1, 0xFE40009C
ED 0xFE400084, 0x00002201
EB 0xFE500000, 0x00
ED 0xFE400084, 0x00000302
EB 0xFE500000, 0x00
EB 0xFE5C0000, 0x00
ED 0xFE400008, 0xBCC90159
ED 0xFE40008C, 0x88800004
ED 0xFE400094, 0x00000004
ED 0xFE400028, 0xA55A0032
ED 0xFE40002C, 0xA55A000C
ED 0xFE400020, 0xA55A2048
ED 0xFE400008, 0xBCC90959
LIST "Change CPGA setting"
ED 0xE61500E0, 0x9E40352E
ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
ED 0xFE400354, 0x01AD8002
LIST "SCIF0 - Serial port for earlyprintk"
EB 0xE6053098, 0xe1
EW 0xE6C40000, 0x0000
EB 0xE6C40004, 0x19
EW 0xE6C40008, 0x0030
#ifndef MMC_AP4EB_H
#define MMC_AP4EB_H
#define PORT185CR (void __iomem *)0xe60520b9
#define PORT186CR (void __iomem *)0xe60520ba
#define PORT187CR (void __iomem *)0xe60520bb
#define PORT188CR (void __iomem *)0xe60520bc
#define PORTR191_160DR (void __iomem *)0xe6056014
static inline void mmc_init_progress(void)
{
/* Initialise LEDS1-4
* registers: PORT185CR-PORT188CR (LED1-LED4 Control)
* value: 0x10 - enable output
*/
__raw_writeb(0x10, PORT185CR);
__raw_writeb(0x10, PORT186CR);
__raw_writeb(0x10, PORT187CR);
__raw_writeb(0x10, PORT188CR);
}
static inline void mmc_update_progress(int n)
{
__raw_writel((__raw_readl(PORTR191_160DR) & ~(0xf << 25)) |
(1 << (25 + n)), PORTR191_160DR);
}
#endif /* MMC_AP4EB_H */
......@@ -7,9 +7,7 @@
*
**************************************************/
#ifdef CONFIG_MACH_AP4EVB
#include "mach/mmc-ap4eb.h"
#elif defined(CONFIG_MACH_MACKEREL)
#ifdef CONFIG_MACH_MACKEREL
#include "mach/mmc-mackerel.h"
#else
#error "unsupported board."
......
......@@ -10,11 +10,7 @@
*
**************************************************/
#ifdef CONFIG_MACH_AP4EVB
#define MACH_TYPE MACH_TYPE_AP4EVB
#define MEMORY_START 0x40000000
#include "mach/head-ap4evb.txt"
#elif defined(CONFIG_MACH_MACKEREL)
#ifdef CONFIG_MACH_MACKEREL
#define MACH_TYPE MACH_TYPE_MACKEREL
#define MEMORY_START 0x40000000
#include "mach/head-mackerel.txt"
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment