usb: phy-generic: Delete unused platform data

The last user of the phy generic platform data was
deleted in commit 1e041b6f
("usb: dwc3: exynos: Remove dead code"). So get rid of
the platform data, which rids us of another consumer of
the legacy GPIO API at the same time. Make sure we
only inlcude <linux/gpio/consumer.h> which is all we use.

Alter the usb_phy_gen_create_phy() function prototype to
not pass any platform data as this is just hardcoded to
NULL at all locations calling it in the kernel.

Move the devm_gpiod_get* calls out of the if (of_node)
parenthesis, as these calls are generic and do not depend
on device tree, they are used by any hardware description.

Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/phy/phy-am335x.c

@@ -57,7 +57,7 @@ static int am335x_phy_probe(struct platform_device *pdev)
 
 	am_phy->dr_mode = of_usb_get_dr_mode_by_phy(pdev->dev.of_node, -1);
 
-	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen, NULL);
+	ret = usb_phy_gen_create_phy(dev, &am_phy->usb_phy_gen);
 	if (ret)
 		return ret;
 

drivers/usb/phy/phy-generic.c

@@ -21,8 +21,7 @@
 #include <linux/clk.h>
 #include <linux/regulator/consumer.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/delay.h>
 
 #include "phy-generic.h"
@@ -204,8 +203,7 @@ static int nop_set_host(struct usb_otg *otg, struct usb_bus *host)
 	return 0;
 }
 
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
-		struct usb_phy_generic_platform_data *pdata)
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop)
 {
 	enum usb_phy_type type = USB_PHY_TYPE_USB2;
 	int err = 0;
@@ -221,28 +219,15 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
 
 		needs_vcc = of_property_read_bool(node, "vcc-supply");
 		needs_clk = of_property_read_bool(node, "clocks");
-		nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
-							   GPIOD_ASIS);
-		err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
-		if (!err) {
-			nop->gpiod_vbus = devm_gpiod_get_optional(dev,
-							 "vbus-detect",
-							 GPIOD_ASIS);
-			err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
-		}
-	} else if (pdata) {
-		type = pdata->type;
-		clk_rate = pdata->clk_rate;
-		needs_vcc = pdata->needs_vcc;
-		if (gpio_is_valid(pdata->gpio_reset)) {
-			err = devm_gpio_request_one(dev, pdata->gpio_reset,
-						    GPIOF_ACTIVE_LOW,
-						    dev_name(dev));
-			if (!err)
-				nop->gpiod_reset =
-					gpio_to_desc(pdata->gpio_reset);
-		}
-		nop->gpiod_vbus = pdata->gpiod_vbus;
+	}
+	nop->gpiod_reset = devm_gpiod_get_optional(dev, "reset",
+						   GPIOD_ASIS);
+	err = PTR_ERR_OR_ZERO(nop->gpiod_reset);
+	if (!err) {
+		nop->gpiod_vbus = devm_gpiod_get_optional(dev,
+						 "vbus-detect",
+						 GPIOD_ASIS);
+		err = PTR_ERR_OR_ZERO(nop->gpiod_vbus);
 	}
 
 	if (err == -EPROBE_DEFER)
@@ -308,7 +293,7 @@ static int usb_phy_generic_probe(struct platform_device *pdev)
 	if (!nop)
 		return -ENOMEM;
 
-	err = usb_phy_gen_create_phy(dev, nop, dev_get_platdata(&pdev->dev));
+	err = usb_phy_gen_create_phy(dev, nop);
 	if (err)
 		return err;
 	if (nop->gpiod_vbus) {

drivers/usb/phy/phy-generic.h

@@ -22,7 +22,6 @@ struct usb_phy_generic {
 int usb_gen_phy_init(struct usb_phy *phy);
 void usb_gen_phy_shutdown(struct usb_phy *phy);
 
-int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop,
-		struct usb_phy_generic_platform_data *pdata);
+int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_generic *nop);
 
 #endif

drivers/usb/phy/phy-keystone.c

@@ -76,7 +76,7 @@ static int keystone_usbphy_probe(struct platform_device *pdev)
 	if (IS_ERR(k_phy->phy_ctrl))
 		return PTR_ERR(k_phy->phy_ctrl);
 
-	ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen, NULL);
+	ret = usb_phy_gen_create_phy(dev, &k_phy->usb_phy_gen);
 	if (ret)
 		return ret;
 

include/linux/usb/usb_phy_generic.h

@@ -3,18 +3,6 @@
 #define __LINUX_USB_NOP_XCEIV_H
 
 #include <linux/usb/otg.h>
-#include <linux/gpio/consumer.h>
-
-struct usb_phy_generic_platform_data {
-	enum usb_phy_type type;
-	unsigned long clk_rate;
-
-	/* if set fails with -EPROBE_DEFER if can't get regulator */
-	unsigned int needs_vcc:1;
-	unsigned int needs_reset:1;	/* deprecated */
-	int gpio_reset;
-	struct gpio_desc *gpiod_vbus;
-};
 
 #if IS_ENABLED(CONFIG_NOP_USB_XCEIV)
 /* sometimes transceivers are accessed only through e.g. ULPI */